Menu
EUR

John Deere 6010 tractor parts & technical data

Trailer couplings, lighting and electrics are just a few of the more than 450 parts listed for the John Deere 6010 from the 6010/6010SE series.

462 parts found for John Deere 6010
Show:
BOSCH Micro relays changeover contact 12 V, 20 - 10 A, 5-pin, without bracket
BOSCH
Version: 12 V / 20 - 10 A, Without bracket, 5-pin, with parallel resistor for suppressing inductive interference voltage peaks. Replaces: 0332207307, ... More
Version: 12 V / 20 - 10 A, Without bracket, 5-pin, with parallel resis...
€9,20 €7,60
Temperature sensor 12 V, standard thread 1/2" NPT
Version: Thread: 1/2" NPT. Thread: 1/2" NPT. Temperature: - °C. More
Version: Thread: 1/2" NPT. Thread: 1/2" NPT. Temperature: - °C.
€47,51 €39,26 €42,95 €35,50
You save 10%
GRANIT Cooling water temperature sensor 6 - 24 V, M14 x 1,5, schakelpunt 28 °C
GRANIT
Version: Temperature switching point: 28°C ± 3°C, Thread: M14 x 1.5, Contact opens as the temperature increases, Outlet: 1-pin via earth, Switching... More
Version: Temperature switching point: 28°C ± 3°C, Thread: M14 x 1.5...
€94,02 €77,70 €85,00 €70,25
You save 10%
GRANIT Brake light switch mechanical with connection cable and plug
GRANIT
Version: Connection cable with plug. More
Version: Connection cable with plug.
€76,23 €63,00 €68,95 €56,98
You save 10%
GRANIT Hand brake cable 865 mm, thread M8 John Deere 6200-6900, SE6010-SE6920
GRANIT
To fit as: John Deere 6100, 6100SE, 6200, 6200SE, 6300, 6300SE, 6400, 6400SE, 6800, 6900, 6010, 6010SE, 6110, 6110SE, 6210, 6210SE, 6310, 6410, 6510, ... More
To fit as: John Deere 6100, 6100SE, 6200, 6200SE, 6300, 6300SE, 6400, ...
€195,45 €161,53 €185,65 €153,43
You save 5%
Sauermann Forced steering both sides ball-Ø 50 mm, 110 x 65 mm John Deere
Sauermann
Tractor type: John Deere 6130, 6330, 6430, 6530, 6630, 6830, 6930, 7730, 7830, 7930, 7430, 7530, 7630 More
Tractor type: John Deere 6130, 6330, 6430, 6530, 6630, 6830, 6930, 773...
€1.156,96 €956,17 €1.046,75 €865,08
You save 10%
External plate thickness 10 mm, inner 238 mm, outer 347 mm, 4 teeth
Version: Thickness: 10 mm Inner: 238 mm Outer: 347 mm 4 teeth More
Version: Thickness: 10 mm Inner: 238 mm Outer: 347 mm 4 teeth
€123,12 €101,75 €116,95 €96,65
You save 5%
GRANIT Internal plate reversing clutch 3,1 mm, inner 240 mm, outer 294 mm
GRANIT
Version: Thickness: 3.1 mm Inner: 240 mm Outer: 294 mm More
Version: Thickness: 3.1 mm Inner: 240 mm Outer: 294 mm
€76,96 €63,60 €73,10 €60,41
You save 5%
GRANIT External plate thickness 7 mm, inner 140 mm, outer 251 mm
GRANIT
Version: thickness = 7 mm inner = 140 mm outer = 251 mm | Menke no.: 221658 More
Version: thickness = 7 mm inner = 140 mm outer = 251 mm | Menke no.: 2...
€131,50 €108,68 €124,90 €103,22
You save 5%
MAHLE Alternator 14 V, 90 A, fastening 56 / 10,2 / 90 mm Fendt, John Deere
MAHLE
Installation angle (°): l 60 | Mounting L / d / R (mm): 56,0 / 10,2 / 90,0 | Flange size (mm): 56,0 | Charging current (A): 90 | Form: B | Pulley Ø ... More
Installation angle (°): l 60 | Mounting L / d / R (mm): 56,0 / 10,2 /...
€452,55 €374,01 €282,80 €233,72
You save 38%
Scharmüller Forced steering 250 mm, K50, right, 2 ton, black, 11,23 kg
Scharmüller
Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm | Steering power (t): 2 | Colour: Black | Lock: K50 | Assemb... More
Description: Approved for steering forces up to 20 kN (2 t) | Connecti...
€612,85 €506,49
Sauermann Housing, pick-up hitch complete John Deere
€269,35 €222,60 €255,85 €211,45
You save 5%
FEBI Hydraulic oil filter HF35474
€59,76 €49,39 €39,31 €32,49
You save 34%
FEBI Alternator 14 V / 150 A, form B, flange 56,0 mm
FEBI
To fit as: Fendt, Hürlimann, Lamborghini, Same More
To fit as: Fendt, Hürlimann, Lamborghini, Same
€435,60 €360,00 €247,81 €204,80
You save 43%
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 82,5 mm, 246 mm, clockwise
€378,63 €312,92 €236,60 €195,54
You save 38%
HELLA Starter motor 12 V, 3 kW, 11 teeth, Ø 83 mm, clockwise
€790,40 €653,22 €635,45 €525,17
You save 20%
Ball joint right 258 mm, taper 24,6 - 28,5 mm, M22 x 1,5, M24 x 1,5
A: 258 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. Taper: 24,6 - 28,5 mm. More
A: 258 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. T...
€95,13 €78,62 €90,35 €74,67
You save 5%
PTO shaft end piece 235 mm, 1 3/8 inch 6 splines, 1 3/4 inch 20 splines
Version: Length 235 mm, 1 3/8", 6 splines, 1 3/4", 20 splines. Reference no.: L173282. More
Version: Length 235 mm, 1 3/8", 6 splines, 1 3/4", 20 splines. Referen...
€249,08 €205,85 €236,60 €195,54
You save 5%
GRANIT Heating element John Deere Engine 6068, Se 6930
€271,17 €224,11 €257,60 €212,89
You save 5%
VICTOR REINZ Air receiver gasket John Deere
€3,52 €2,91
Showing 217 - 240 of 462

John Deere 6010 parts

More than 450 replacement parts fit the John Deere 6010, from a small O-ring for the oil pump to a complete tractor seat. Here is how they break down across the tractor.

Engine, cooling and electrics

For the engine there are thermostats and thermostat housing gaskets, O-rings and seals for the oil circuit, hoses and bushes. The electrical side includes starter motors, alternators and micro relays.

A slow cranking starter is not always a starter problem. Check the battery and the earth cable first, because a new starter on a corroded earth will turn just as slowly. If you only hear a click, look at the relay and the supply before anything else.

Plates for the PTO and front axle

Internal plates for the PTO clutch and external plates for the front axle are on this page too. When the PTO slips under load or the front axle lock no longer holds, replace the complete pack rather than just the worst plates. Soak new plates in the specified oil for a while before fitting them, as dry plates can burn on first engagement.

Seats and hitching

  • tractor seats and seat cushions, partly from GRAMMER
  • drawbar balls and automatic drawbars
  • forced steering parts from Scharmüller and Walterscheid
  • further parts from HELLA and GRANIT

Whenever the thermostat comes out, fit a new housing gasket and scrape the mating faces clean. Old gasket residue causes leaks even with a fresh gasket. Bleed the cooling system carefully afterwards, because an air pocket at the thermostat makes it open late. A hose that feels soft or swollen is worth replacing at the same time, so you do not have to drain the coolant again shortly after.

Check the forced steering ball and its socket for play from time to time. A little grease prevents it from running dry and wearing unevenly. A worn drawbar ball shows itself through knocks when pulling away and braking.

Getting the right fit for your 6010

The 6010 also exists as the 6010SE, and the identification plate tells you which one you have. For clutch plates, compare the number on an old plate. Starters and alternators carry a label on the housing with a reference number to check against.

The same John Deere range includes these tractors, each with its own page:

For any other model, go to John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart