Menu
EUR

John Deere 6010 tractor parts & technical data

Trailer couplings, lighting and electrics are just a few of the more than 450 parts listed for the John Deere 6010 from the 6010/6010SE series.

462 parts found for John Deere 6010
Show:
Internal plate PTO shaft 3,5 mm, inner 130,5 mm, outer 197,2 mm
Version: Thickness: 3.5 mm Inner: 130.5 mm Outer: 197.2 mm 42 splines More
Version: Thickness: 3.5 mm Inner: 130.5 mm Outer: 197.2 mm 42 splines
€76,58 €63,29 €72,75 €60,12
You save 5%
External plate thickness 6 mm, inner 247 mm, outer 329 mm
Version: thickness = 6 mm inner = 247 mm outer = 329 mm More
Version: thickness = 6 mm inner = 247 mm outer = 329 mm
€130,93 €108,21 €124,35 €102,77
You save 5%
Internal plate driving clutch 3,6 mm, inner 125 mm, outer 224,9 mm
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm More
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm
€108,46 €89,64 €103,00 €85,12
You save 5%
GRANIT Clutch cable driving clutch 1165 mm, sleeve length 915 mm, M6 John Deere
GRANIT
Sleeve length (mm): 915 | Cable length (mm): 1165 | Thread: M6 More
Sleeve length (mm): 915 | Cable length (mm): 1165 | Thread: M6
€252,70 €208,84
LUK Pilot bearing PTO shaft 45 x 75 x 16 mm Fendt, John Deere
€86,64 €71,60 €82,30 €68,02
You save 5%
MAHLE Alternator 14 V, 120 A, fastening 56 / 10,2 / 90 mm John Deere
MAHLE
Direction of rotation: ↻ | Charging current (A): 120 | Flange size (mm): 56,0 | Additional information: Compact alternator, with W connection, dust-... More
Direction of rotation: ↻ | Charging current (A): 120 | Flange size (...
€498,83 €412,26 €311,75 €257,64
You save 38%
Alternator 14 V / 90 A, flange 2 x 56 mm
Belt tension hole Ø / R (mm): 10,2 / 90,0 | Pulley spacing (mm): - | Pulley Ø (mm): - | Nominal voltage (V): 14 | Additional information: Compact al... More
Belt tension hole Ø / R (mm): 10,2 / 90,0 | Pulley spacing (mm): - | ...
€244,63 €202,17 €232,35 €192,02
You save 5%
GRANIT Hubspindel John Deere 6010 - 6620
€158,15 €130,70 €150,20 €124,13
You save 5%
HELLA Alternator 14 V / 85 A, without belt pulley, Fendt, John Deere
HELLA
Nominal values (V / A): 14 / 85 | Charging current (A): 85 | Nominal voltage (V): 14 | Additional information: Without pulley More
Nominal values (V / A): 14 / 85 | Charging current (A): 85 | Nominal v...
€411,92 €340,43 €331,15 €273,68
You save 20%
HELLA Alternator 14 V, 120 A, without belt pulley John Deere
HELLA
Additional information: Without pulley | Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal voltage (V): 14 More
Additional information: Without pulley | Nominal values (V / A): 14 / ...
€515,56 €426,08 €414,51 €342,57
You save 20%
FEBI Electric cooling fan John Deere 6205, 6505, 6010 - 6810
FEBI
To fit as: John Deere 6205, 6505, 6010, 6010SE, 6110, 6110SE, 6210, 6210SE, 6510, 6510SE, 6610, 6610SE, 6810 More
To fit as: John Deere 6205, 6505, 6010, 6010SE, 6110, 6110SE, 6210, 62...
€403,75 €333,68 €232,81 €192,41
You save 42%
GRANIT Ball joint 120 mm, taper 25 - 27 mm, M24 x 1,5 / M24 x 1,5
GRANIT
A: 120 mm. C: M24 x 1,5 mm. D: M24 x 1,5 mm. E: 25 mm. F: 27 mm. Taper: 25 - 27 mm. More
A: 120 mm. C: M24 x 1,5 mm. D: M24 x 1,5 mm. E: 25 mm. F: 27 mm. Taper...
€106,83 €88,29 €101,45 €83,84
You save 5%
GRANIT Seal cover brake cylinder John Deere
GRANIT Brake disc Ø 313 x 5,9 mm, 14 teeth Heavy Duty John Deere
€271,87 €224,69 €258,25 €213,43
You save 5%
GRANIT Brake disc Ø 313 x 4,9 mm, 14 teeth John Deere
€199,25 €164,67 €189,25 €156,41
You save 5%
GRANIT Dipstick John Deere 6010-6620
€36,07 €29,81 €34,25 €28,31
You save 5%
GRANIT Plain bearing bush torsion damper 30 x 34 x 16 mm John Deere
GRANIT
Inner Ø: 30 mm. Outer Ø: 34 mm. Length: 16 mm. More
Inner Ø: 30 mm. Outer Ø: 34 mm. Length: 16 mm.
€4,05 €3,35
Scharmüller Drawbar frame prepared draw pendulum 390/25/32 mm, 4000 kg, black
Scharmüller
suitable for: Fendt. Series: Favorit-Vario 900. Category: Bearing supports. Version: Prepared for drawbar. Colour: Black. D-value: 97,1 kN. Guide widt... More
suitable for: Fendt. Series: Favorit-Vario 900. Category: Bearing supp...
€1.586,80 €1.311,41
GRANIT Belt kit air conditioning, belt tensioner and idler pulley, belt 2475 mm, 8 ribs
GRANIT
Version: With air conditioning but without compressed air system. Contents: Belt tensioner, idler pulley, belt. Belt length: 2475 mm. Ribs: 8 n. More
Version: With air conditioning but without compressed air system. Cont...
€475,93 €393,33 €452,10 €373,64
You save 5%
Belt kit belt tensioner without air pressure and air conditioning, 1930 mm, 8 ribs
Version: Without compressed air and air conditioning system. Contents: Belt tensioner, belt. Belt length: 1930 mm. Ribs: 8 n. More
Version: Without compressed air and air conditioning system. Contents:...
€385,39 €318,50 €366,10 €302,56
You save 5%
GRANIT Piston ring set 3 rings Ø 106,5 mm, 2,42 mm / 2,385 mm / 3,465 mm
€49,09 €40,57 €46,60 €38,51
You save 5%
GRANIT Bush balancer shafts Ø 40,21 x 43,38 x 27,8 mm John Deere
GRANIT
Ø: 40,21 x 43,38 x 27,8 mm. More
Ø: 40,21 x 43,38 x 27,8 mm.
€18,40 €15,21
GRANIT Bush balancer shafts Ø 40,21 x 43,38 x 27,8 mm John Deere
GRANIT
Ø: 40,21 x 43,38 x 27,8 mm. More
Ø: 40,21 x 43,38 x 27,8 mm.
€18,40 €15,21
Showing 313 - 336 of 462

John Deere 6010 parts

More than 450 replacement parts fit the John Deere 6010, from a small O-ring for the oil pump to a complete tractor seat. Here is how they break down across the tractor.

Engine, cooling and electrics

For the engine there are thermostats and thermostat housing gaskets, O-rings and seals for the oil circuit, hoses and bushes. The electrical side includes starter motors, alternators and micro relays.

A slow cranking starter is not always a starter problem. Check the battery and the earth cable first, because a new starter on a corroded earth will turn just as slowly. If you only hear a click, look at the relay and the supply before anything else.

Plates for the PTO and front axle

Internal plates for the PTO clutch and external plates for the front axle are on this page too. When the PTO slips under load or the front axle lock no longer holds, replace the complete pack rather than just the worst plates. Soak new plates in the specified oil for a while before fitting them, as dry plates can burn on first engagement.

Seats and hitching

  • tractor seats and seat cushions, partly from GRAMMER
  • drawbar balls and automatic drawbars
  • forced steering parts from Scharmüller and Walterscheid
  • further parts from HELLA and GRANIT

Whenever the thermostat comes out, fit a new housing gasket and scrape the mating faces clean. Old gasket residue causes leaks even with a fresh gasket. Bleed the cooling system carefully afterwards, because an air pocket at the thermostat makes it open late. A hose that feels soft or swollen is worth replacing at the same time, so you do not have to drain the coolant again shortly after.

Check the forced steering ball and its socket for play from time to time. A little grease prevents it from running dry and wearing unevenly. A worn drawbar ball shows itself through knocks when pulling away and braking.

Getting the right fit for your 6010

The 6010 also exists as the 6010SE, and the identification plate tells you which one you have. For clutch plates, compare the number on an old plate. Starters and alternators carry a label on the housing with a reference number to check against.

The same John Deere range includes these tractors, each with its own page:

For any other model, go to John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart