Menu
EUR

John Deere 6010 tractor parts & technical data

Trailer couplings, lighting and electrics are just a few of the more than 450 parts listed for the John Deere 6010 from the 6010/6010SE series.

462 parts found for John Deere 6010
Show:
Internal plate PTO shaft 3,5 mm, inner 130,5 mm, outer 197,2 mm
5%
Internal plate PTO shaft 3,5 mm, inner 130,5 mm, outer 197,2 mm
Version: Thickness: 3.5 mm Inner: 130.5 mm Outer: 197.2 mm 42 splines
€76,58 €63,29 €72,75 €60,12
 
External plate thickness 6 mm, inner 247 mm, outer 329 mm
5%
External plate thickness 6 mm, inner 247 mm, outer 329 mm
Version: thickness = 6 mm inner = 247 mm outer = 329 mm
€130,93 €108,21 €124,35 €102,77
 
Internal plate driving clutch 3,6 mm, inner 125 mm, outer 224,9 mm
5%
Internal plate driving clutch 3,6 mm, inner 125 mm, outer 224,9 mm
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm
€108,46 €89,64 €103,00 €85,12
 
GRANIT Clutch cable driving clutch 1165 mm, sleeve length 915 mm, M6 John Deere
GRANIT
Clutch cable driving clutch 1165 mm, sleeve length 915 mm, M6 John Deere
Sleeve length (mm): 915 | Cable length (mm): 1165 | Thread: M6
€252,70 €208,84
 
LUK Pilot bearing PTO shaft 45 x 75 x 16 mm Fendt, John Deere
5%
LUK
Pilot bearing PTO shaft 45 x 75 x 16 mm Fendt, John Deere
€86,64 €71,60 €82,30 €68,02
 
MAHLE Alternator 14 V, 120 A, fastening 56 / 10,2 / 90 mm John Deere
38%
MAHLE
Alternator 14 V, 120 A, fastening 56 / 10,2 / 90 mm John Deere
Direction of rotation: ↻ | Charging current (A): 120 | Flange size (mm): 56,0 | ...
€498,83 €412,26 €311,75 €257,64
 
Alternator 14 V / 90 A, flange 2 x 56 mm
5%
Alternator 14 V / 90 A, flange 2 x 56 mm
Belt tension hole Ø / R (mm): 10,2 / 90,0 | Pulley spacing (mm): - | Pulley Ø (m...
€244,63 €202,17 €232,35 €192,02
 
GRANIT Hubspindel John Deere 6010 - 6620
5%
GRANIT
Hubspindel John Deere 6010 - 6620
€158,15 €130,70 €150,20 €124,13
 
HELLA Alternator 14 V / 85 A, without belt pulley, Fendt, John Deere
20%
HELLA
Alternator 14 V / 85 A, without belt pulley, Fendt, John Deere
Nominal values (V / A): 14 / 85 | Charging current (A): 85 | Nominal voltage (V)...
€411,92 €340,43 €331,15 €273,68
 
HELLA Alternator 14 V, 120 A, without belt pulley John Deere
20%
HELLA
Alternator 14 V, 120 A, without belt pulley John Deere
Additional information: Without pulley | Nominal values (V / A): 14 / 120 | Char...
€515,56 €426,08 €414,51 €342,57
 
FEBI Electric cooling fan John Deere 6205, 6505, 6010 - 6810
42%
FEBI
Electric cooling fan John Deere 6205, 6505, 6010 - 6810
To fit as: John Deere 6205, 6505, 6010, 6010SE, 6110, 6110SE, 6210, 6210SE, 6510...
€403,75 €333,68 €232,81 €192,41
 
GRANIT Ball joint 120 mm, taper 25 - 27 mm, M24 x 1,5 / M24 x 1,5
5%
GRANIT
Ball joint 120 mm, taper 25 - 27 mm, M24 x 1,5 / M24 x 1,5
A: 120 mm. C: M24 x 1,5 mm. D: M24 x 1,5 mm. E: 25 mm. F: 27 mm. Taper: 25 - 27 ...
€106,83 €88,29 €101,45 €83,84
 
GRANIT Seal cover brake cylinder John Deere
GRANIT
Seal cover brake cylinder John Deere
€18,20 €15,04
 
GRANIT Brake disc Ø 313 x 5,9 mm, 14 teeth Heavy Duty John Deere
5%
GRANIT
Brake disc Ø 313 x 5,9 mm, 14 teeth Heavy Duty John Deere
€271,87 €224,69 €258,25 €213,43
 
GRANIT Brake disc Ø 313 x 4,9 mm, 14 teeth John Deere
5%
GRANIT
Brake disc Ø 313 x 4,9 mm, 14 teeth John Deere
€199,25 €164,67 €189,25 €156,41
 
GRANIT Dipstick John Deere 6010-6620
5%
GRANIT
Dipstick John Deere 6010-6620
€36,07 €29,81 €34,25 €28,31
 
GRANIT Plain bearing bush torsion damper 30 x 34 x 16 mm John Deere
GRANIT
Plain bearing bush torsion damper 30 x 34 x 16 mm John Deere
Inner Ø: 30 mm. Outer Ø: 34 mm. Length: 16 mm.
€4,05 €3,35
 
Scharmüller Drawbar frame prepared draw pendulum 390/25/32 mm, 4000 kg, black
Scharmüller
Drawbar frame prepared draw pendulum 390/25/32 mm, 4000 kg, black
suitable for: Fendt. Series: Favorit-Vario 900. Category: Bearing supports. Vers...
€1.586,80 €1.311,41
 
GRANIT Belt kit air conditioning, belt tensioner and idler pulley, belt 2475 mm, 8 ribs
5%
GRANIT
Belt kit air conditioning, belt tensioner and idler pulley, belt 2475 mm, 8 ribs
Version: With air conditioning but without compressed air system. Contents: Belt...
€475,93 €393,33 €452,10 €373,64
 
Belt kit belt tensioner without air pressure and air conditioning, 1930 mm, 8 ribs
5%
Belt kit belt tensioner without air pressure and air conditioning, 1930 mm, 8 ribs
Version: Without compressed air and air conditioning system. Contents: Belt tens...
€385,39 €318,50 €366,10 €302,56
 
VICTOR REINZ Oil sump gasket engine 4039D/T, 4045D/T John Deere
VICTOR REINZ
Oil sump gasket engine 4039D/T, 4045D/T John Deere
€32,10 €26,53
 
GRANIT Piston ring set 3 rings Ø 106,5 mm, 2,42 mm / 2,385 mm / 3,465 mm
5%
GRANIT
Piston ring set 3 rings Ø 106,5 mm, 2,42 mm / 2,385 mm / 3,465 mm
€49,09 €40,57 €46,60 €38,51
 
GRANIT Bush balancer shafts Ø 40,21 x 43,38 x 27,8 mm John Deere
GRANIT
Bush balancer shafts Ø 40,21 x 43,38 x 27,8 mm John Deere
Ø: 40,21 x 43,38 x 27,8 mm.
€18,40 €15,21
 
GRANIT Bush balancer shafts Ø 40,21 x 43,38 x 27,8 mm John Deere
GRANIT
Bush balancer shafts Ø 40,21 x 43,38 x 27,8 mm John Deere
Ø: 40,21 x 43,38 x 27,8 mm.
€18,40 €15,21
 
Showing 313 - 336 of 462

John Deere 6010 parts

More than 450 replacement parts fit the John Deere 6010, from a small O-ring for the oil pump to a complete tractor seat. Here is how they break down across the tractor.

Engine, cooling and electrics

For the engine there are thermostats and thermostat housing gaskets, O-rings and seals for the oil circuit, hoses and bushes. The electrical side includes starter motors, alternators and micro relays.

A slow cranking starter is not always a starter problem. Check the battery and the earth cable first, because a new starter on a corroded earth will turn just as slowly. If you only hear a click, look at the relay and the supply before anything else.

Plates for the PTO and front axle

Internal plates for the PTO clutch and external plates for the front axle are on this page too. When the PTO slips under load or the front axle lock no longer holds, replace the complete pack rather than just the worst plates. Soak new plates in the specified oil for a while before fitting them, as dry plates can burn on first engagement.

Seats and hitching

  • tractor seats and seat cushions, partly from GRAMMER
  • drawbar balls and automatic drawbars
  • forced steering parts from Scharmüller and Walterscheid
  • further parts from HELLA and GRANIT

Whenever the thermostat comes out, fit a new housing gasket and scrape the mating faces clean. Old gasket residue causes leaks even with a fresh gasket. Bleed the cooling system carefully afterwards, because an air pocket at the thermostat makes it open late. A hose that feels soft or swollen is worth replacing at the same time, so you do not have to drain the coolant again shortly after.

Check the forced steering ball and its socket for play from time to time. A little grease prevents it from running dry and wearing unevenly. A worn drawbar ball shows itself through knocks when pulling away and braking.

Getting the right fit for your 6010

The 6010 also exists as the 6010SE, and the identification plate tells you which one you have. For clutch plates, compare the number on an old plate. Starters and alternators carry a label on the housing with a reference number to check against.

The same John Deere range includes these tractors, each with its own page:

For any other model, go to John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart