Menu
EUR

John Deere 6170M tractor parts & technical data

More than 250 parts fit the John Deere 6170M from the 6M series. Among them are trailer couplings, lighting and engine components for this tractor.

247 parts found for John Deere 6170M
Show:
Sauermann Forced steering ball Ø 50 mm, 110 x 65 mm John Deere
Sauermann
Assembly notes: Both ends | Description: Cranked upwards | Hole Ø (mm): 21 | Colour: Green | Hole pattern (mm): 110 x 65 | Ball Ø (mm): 50 More
Assembly notes: Both ends | Description: Cranked upwards | Hole Ø (mm...
€1.023,94 €846,23 €972,70 €803,88
You save 5%
Scharmüller Forced steering K50, 250 mm, both sides, AGCO gray, 18 kg
Scharmüller
Steering power (t): 2 | Colour: AGCO grey | Lock: K50 | Assembly notes: Both ends | Description: Approved for steering forces up to 20 kN (2 t) | Conn... More
Steering power (t): 2 | Colour: AGCO grey | Lock: K50 | Assembly notes...
€1.102,20 €910,91
Sauermann Trailer coupling hitch pin 38 mm, rail 330 mm, John Deere green
Sauermann
Detent pin Ø (mm): 25 | Colour: Green | Connecting pin (mm): 38 | Rail width (mm): 330 | Drawbar eye: DIN 11026, 11043, 74054 (ISO 8755) = 40 mm | D-... More
Detent pin Ø (mm): 25 | Colour: Green | Connecting pin (mm): 38 | Rai...
€1.189,23 €982,83 €1.075,95 €889,21
You save 10%
AKS-Dasis Filter dryer airco Ø 63 mm, 160 mm John Deere 6105M-6195M, 6110R-6250R
AKS-Dasis
Outer Ø (mm): 63 | Height (mm): 160 More
Outer Ø (mm): 63 | Height (mm): 160
€108,50 €89,67 €103,00 €85,12
You save 5%
Bush camshaft Ø 55,88 x 59,87 x 38,9 mm John Deere
€45,15 €37,31 €42,85 €35,41
You save 5%
Valve set for filter head
Description: For filter head. More
Description: For filter head.
€25,85 €21,36
GRANIT Throttle injection pump John Deere
GRANIT O-ring 34,5 x 3,5 mm John Deere 5080 - 8530
GRANIT
Version: Ø 34,5 x 3,5 mm More
Version: Ø 34,5 x 3,5 mm
€6,65 €5,50
Sauermann Bottom pin kit trailer coupling John Deere
€275,76 €227,90 €261,95 €216,49
You save 5%
DANA Spicer Gear ring final drive front axle 750/201
Crankshaft seal 55,4 x 84 x 8 mm John Deere 5075GL - 6195R
Outer Ø (mm): 84 | Width (mm): 8 | Inner Ø (mm): 55,4 More
Outer Ø (mm): 84 | Width (mm): 8 | Inner Ø (mm): 55,4
€33,50 €27,69
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 11,45 kg
Scharmüller
Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm | Steering power (t): 2 | Co... More
Assembly notes: Anticlockwise | Description: Approved for steering for...
€612,85 €506,49
Universal joint 35 x 97 mm, centralised lubrication
A: 35 mm. B: 97 mm. Universal joint size: . Lubrication system: Centralised lubrication. More
A: 35 mm. B: 97 mm. Universal joint size: . Lubrication system: Centra...
€120,76 €99,80 €114,70 €94,79
You save 5%
Scharmüller Drawbar frame standard 330/25/32 mm, 2000 kg, JD green John Deere
Scharmüller
suitable for: John Deere. Series: 6000. Category: Bearing supports. Version: Standard. Colour: JD green. D-value: 91,3 kN. Guide width: 32 mm. Rail wi... More
suitable for: John Deere. Series: 6000. Category: Bearing supports. Ve...
€1.034,55 €855,00
Scharmüller Drawbar frame long 330/25/32, 2000 kg John Deere
Scharmüller
suitable for: John Deere. Series: 6000. Category: Bearing supports. Version: Long. Colour: JD green. D-value: 91,3 kN. Guide width: 32 mm. Rail width:... More
suitable for: John Deere. Series: 6000. Category: Bearing supports. Ve...
€1.228,70 €1.015,45
GRANIT Cylinder head bolt 1/2" x 162 mm John Deere
GRANIT
Dimensions: 1/2" x 162 mm. More
Dimensions: 1/2" x 162 mm.
€27,60 €22,81
GRANIT Cylinder head bolt 1/2" x 112 mm John Deere
GRANIT
Dimensions: 1/2" x 112 mm. More
Dimensions: 1/2" x 112 mm.
€8,55 €7,07
ROCKINGER Drawbar without sensor rail 330 mm, coupling pin 38 mm, JD green
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: JD green. Desc... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.019,62 €842,66 €780,70 €645,21
You save 23%
Walterscheid Adapter plate rail width 390 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 2800 kg. D-value: 89,3 kN. Central hole: 95 mm. Hole pattern: 160 x 100 m... More
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€1.158,06 €957,07 €909,90 €751,98
You save 21%
GRANIT Shim hood John Deere
€1,27 €1,05
Calix Engine preheater, complete Ø 1 5/8" (41,5 mm) John Deere
Calix
To fit as: John Deere 4045, 4055, 4255, 4455, 4755, 4955, 5070M, 5080M, 5090M, 5080R, 5080RN, 5090R, 5090RN, 5100M, 5100R, 5100RN, 5620, 5720, 5820, 6... More
To fit as: John Deere 4045, 4055, 4255, 4455, 4755, 4955, 5070M, 5080M...
€387,37 €320,14 €368,00 €304,13
You save 5%
Showing 25 - 48 of 247

John Deere 6170M parts

On a lot of farms the 6170M is the tractor that does a bit of everything, from mowing and feeding to road haulage. That mix of work shows in the parts it gets through. This page brings together more than 250 parts that fit the 6170M, from GRANIT, ROCKINGER, Sauermann, Walterscheid and Scharmüller.

PTO and driveline

If the PTO slips under load or engages with a jolt, the internal plates of the PTO clutch are a likely cause, and they are available here as separate parts. For the shaft out to the implement there are universal joints, including versions with central lubrication, and there are camshaft bushes for the engine. A tip for greasing a universal joint: keep pumping until fresh grease appears at the seal of all four bearing cups. If one cup stays dry, that bearing is running without lubrication and will fail early.

Hitching up and lighting

At the rear you will find ball drawbars, drawbar frames, adapter plates and connector heads for the trailer air brakes. Running a trailer with forced steering? The parts for that system are here too. For work that starts before daylight there are work lights, including long range driving beams.

Engine seals and cab fittings

Keeping the engine dry often comes down to small parts such as fuel line O-rings, oil filler cap seals, plugs and tank caps. An air temperature sensor is also available. Inside the cab, handles that have worked loose or snapped after years of climbing in and out can be replaced.

Air brake connector heads have a hard life on a tractor that swaps trailers several times a day. A split rubber seal in the head lets air out and dirt in, so replace the head as soon as you hear a hiss when coupling up. On a drawbar frame with a ball hitch, clean and lightly grease the latch now and then so it keeps closing fully. And when fitting a new work light, a smear of dielectric grease in the plug keeps moisture away from the contacts.

Making sure a part fits your 6170M

Check the serial plate and confirm it reads 6170M. Models in the 6M series look very much alike, and that quick look saves ordering for the wrong machine. If the old part carries a number, compare it with the reference number listed with the product.

Other models in the series each have their own page, which helps when there is more than one M tractor in the yard:

For every other model from the brand, start at John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart