Menu
EUR

John Deere 6170M tractor parts & technical data

More than 250 parts fit the John Deere 6170M from the 6M series. Among them are trailer couplings, lighting and engine components for this tractor.

247 parts found for John Deere 6170M
Show:
GRANIT Hose inner-Ø 5 mm, outer-Ø 12 mm, material thickness 3,5 mm
GRANIT
Inner Ø: 5 mm. Outer Ø: 12 mm. Material thickness: 3,5 mm. More
Inner Ø: 5 mm. Outer Ø: 12 mm. Material thickness: 3,5 mm.
€6,20 €5,12
Filler cap hydraulic block Ø 38 mm John Deere
Dimensions: Ø: 38 mm. More
Dimensions: Ø: 38 mm.
€32,55 €26,90
GRANIT Washer multifunction unit with direction control
GRANIT
Version: multifunction unit (with electric direction operation). More
Version: multifunction unit (with electric direction operation).
€18,20 €15,04
GRANIT Hose inner-Ø 5 mm, outer-Ø 12 mm, material thickness 3,5 mm - 1 meter
€6,20 €5,12
GRANIT Cab filter for AF26672
€68,30 €56,45 €61,75 €51,03
You save 10%
Walterscheid Inner part ball 80 rail width 390 mm, pin Ø 25 mm, 4000 kg
Walterscheid
Colour: Black | Load capacity (kg): 3000 | Ball Ø (mm): 80 | D-value (kN): 102 | Detent pin Ø (mm): 25 | Rail width (mm): 390 | Description: This pr... More
Colour: Black | Load capacity (kg): 3000 | Ball Ø (mm): 80 | D-value ...
€2.169,53 €1.793,00 €1.789,85 €1.479,21
You save 18%
Wabco Trailer control valve 20 bar, M16 x 1,5 John Deere
€1.882,76 €1.556,00 €1.788,60 €1.478,18
You save 5%
Sauermann Bottom pin kit trailer coupling John Deere
€275,76 €227,90 €261,95 €216,49
You save 5%
Crankshaft seal 55,4 x 84 x 8 mm John Deere 5075GL - 6195R
Outer Ø (mm): 84 | Width (mm): 8 | Inner Ø (mm): 55,4 More
Outer Ø (mm): 84 | Width (mm): 8 | Inner Ø (mm): 55,4
€33,50 €27,69
GRANIT Track rod 796 mm, Ø 34 mm, taper 19,7 - 23,6 mm
GRANIT
A: 796 mm. D: 34 mm. E: 19,7 mm. F: 23,6 mm. Taper: 19,7 - 23,6 mm. More
A: 796 mm. D: 34 mm. E: 19,7 mm. F: 23,6 mm. Taper: 19,7 - 23,6 mm.
€147,67 €122,04 €140,25 €115,91
You save 5%
Starter ring gear Ø 385/415 mm, 129 teeth John Deere
Version: Ø 385/415, 129 teeth. More
Version: Ø 385/415, 129 teeth.
€97,51 €80,59 €92,60 €76,53
You save 5%
ROCKINGER Forced steering right K50, Rockinger drawbar frame 787880K01140
ROCKINGER
Lock: K50. Assembly notes: Right. To fit: Rockinger ball insert or hitch support 787880K01140. More
Lock: K50. Assembly notes: Right. To fit: Rockinger ball insert or hit...
€703,31 €581,25 €565,46 €467,32
You save 20%
Scharmüller Drawbar frame long 330/25/32, 2000 kg John Deere
Scharmüller
suitable for: John Deere. Series: 6000. Category: Bearing supports. Version: Long. Colour: JD green. D-value: 91,3 kN. Guide width: 32 mm. Rail width:... More
suitable for: John Deere. Series: 6000. Category: Bearing supports. Ve...
€1.228,70 €1.015,45
GRANIT EGR valve John Deere 6150M, 6170M, 6140R-6210R
Spacer cylinder liner Ø 120,8 x 125,3 x 0,05 mm John Deere
Ø: 120,8 x 125,3 x 0,05 mm. More
Ø: 120,8 x 125,3 x 0,05 mm.
€30,65 €25,33
Hinge John Deere Series 6M-6900, SE6010-7530 PR
€42,53 €35,15 €40,40 €33,39
You save 5%
Walterscheid Drawbar support M16 black John Deere
Walterscheid
Colour: black. Description: Drawbar support that can be mounted securely in the direction of travel at the rear below the gearbox.. Included in delive... More
Colour: black. Description: Drawbar support that can be mounted secure...
€361,79 €299,00 €298,45 €246,65
You save 18%
Showing 49 - 72 of 247

John Deere 6170M parts

On a lot of farms the 6170M is the tractor that does a bit of everything, from mowing and feeding to road haulage. That mix of work shows in the parts it gets through. This page brings together more than 250 parts that fit the 6170M, from GRANIT, ROCKINGER, Sauermann, Walterscheid and Scharmüller.

PTO and driveline

If the PTO slips under load or engages with a jolt, the internal plates of the PTO clutch are a likely cause, and they are available here as separate parts. For the shaft out to the implement there are universal joints, including versions with central lubrication, and there are camshaft bushes for the engine. A tip for greasing a universal joint: keep pumping until fresh grease appears at the seal of all four bearing cups. If one cup stays dry, that bearing is running without lubrication and will fail early.

Hitching up and lighting

At the rear you will find ball drawbars, drawbar frames, adapter plates and connector heads for the trailer air brakes. Running a trailer with forced steering? The parts for that system are here too. For work that starts before daylight there are work lights, including long range driving beams.

Engine seals and cab fittings

Keeping the engine dry often comes down to small parts such as fuel line O-rings, oil filler cap seals, plugs and tank caps. An air temperature sensor is also available. Inside the cab, handles that have worked loose or snapped after years of climbing in and out can be replaced.

Air brake connector heads have a hard life on a tractor that swaps trailers several times a day. A split rubber seal in the head lets air out and dirt in, so replace the head as soon as you hear a hiss when coupling up. On a drawbar frame with a ball hitch, clean and lightly grease the latch now and then so it keeps closing fully. And when fitting a new work light, a smear of dielectric grease in the plug keeps moisture away from the contacts.

Making sure a part fits your 6170M

Check the serial plate and confirm it reads 6170M. Models in the 6M series look very much alike, and that quick look saves ordering for the wrong machine. If the old part carries a number, compare it with the reference number listed with the product.

Other models in the series each have their own page, which helps when there is more than one M tractor in the yard:

For every other model from the brand, start at John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart