Menu
EUR

John Deere 7215R tractor parts & technical data

More than 140 parts that fit the John Deere 7215R from the 7R series are listed here, among them trailer couplings, lighting and electrics.

144 parts found for John Deere 7215R
Show:
Scharmüller Drawbar frame standard Piton fix, 97,1 kN, 3000 kg, rail 390 mm
Scharmüller
Drawbar frame standard Piton fix, 97,1 kN, 3000 kg, rail 390 mm
Rail width (mm): 390 | Lock: Piton Fix manual | Guide width (mm): 32 | Colour: A...
€1.504,56 €1.243,44
 
Scharmüller Drawbar frame standard ball 80, 104 kN, 4000 kg, rail 390 mm
Scharmüller
Drawbar frame standard ball 80, 104 kN, 4000 kg, rail 390 mm
Detent pin Ø (mm): 25 | Colour: AGCO grey | Lock: Ball 80 manual | Rail width (m...
€2.240,25 €1.851,45
 
Scharmüller Drawbar retrofit kit 80 x 50 mm, 89,3 kN, 2200 kg, cat. 2, AGCO gray
Scharmüller
Drawbar retrofit kit 80 x 50 mm, 89,3 kN, 2200 kg, cat. 2, AGCO gray
Mounting position: 2 | Colour: AGCO grey | Width (mm): 80 | Load capacity (kg): ...
€597,55 €493,84
 
Sauermann Verstelplaat with handle trailer coupling 330 mm rail width
5%
Sauermann
Verstelplaat with handle trailer coupling 330 mm rail width
€240,79 €199,00 €228,75 €189,05
 
GRANIT Internal plate reversing clutch 3,1 mm, inner 240 mm, outer 294 mm
5%
GRANIT
Internal plate reversing clutch 3,1 mm, inner 240 mm, outer 294 mm
Version: Thickness: 3.1 mm Inner: 240 mm Outer: 294 mm
€76,96 €63,60 €73,10 €60,41
 
GRANIT External plate thickness 7 mm, inner 140 mm, outer 251 mm
5%
GRANIT
External plate thickness 7 mm, inner 140 mm, outer 251 mm
Version: thickness = 7 mm inner = 140 mm outer = 251 mm | Menke no.: 221658
€131,50 €108,68 €124,90 €103,22
 
FEBI Thermostat John Deere 6090MC, 6095MC, 6100MC, 6105MC
72%
FEBI
Thermostat John Deere 6090MC, 6095MC, 6100MC, 6105MC
Thermostat John Deere 6090MC, 6095MC, 6100MC, 6105MC
€82,72 €68,36 €23,09 €19,08
 
ROCKINGER Support plate System 80 ball 80, 930 x 180 mm, 4.500 kg, 100 kN
20%
ROCKINGER
Support plate System 80 ball 80, 930 x 180 mm, 4.500 kg, 100 kN
Lock: ball 80. Load capacity: 4500 kg. D-value: 100 kN. Length: 930 mm. Width: 1...
€1.885,18 €1.558,00 €1.515,65 €1.252,60
 
GRANIT Thrust bearing John Deere
5%
GRANIT
Thrust bearing John Deere
€36,26 €29,97 €34,40 €28,43
 
Seal kit outer lift cylinder Ø 70 mm John Deere
5%
Seal kit outer lift cylinder Ø 70 mm John Deere
€173,03 €143,00 €164,35 €135,83
 
GRANIT Wiper motor John Deere Series 7R-9630T, SE6010-6930 PR
5%
GRANIT
Wiper motor John Deere Series 7R-9630T, SE6010-6930 PR
€251,32 €207,70 €238,75 €197,31
 
Sauermann Forced steering right ball-Ø 50 mm, 69 x 50/80 mm John Deere
5%
Sauermann
Forced steering right ball-Ø 50 mm, 69 x 50/80 mm John Deere
Assembly notes: Right. Colour: Green. Hole pattern: 69 x 50/80 mm. Ball Ø: 50 mm...
€907,06 €749,64 €861,70 €712,15
 
Telescopic mirror bracket John Deere Series 7R-9560RT
5%
Telescopic mirror bracket John Deere Series 7R-9560RT
€221,67 €183,20 €210,55 €174,01
 
GRANIT Seal John Deere 7R, 8R/8RT, 8000-8030
5%
GRANIT
Seal John Deere 7R, 8R/8RT, 8000-8030
€33,93 €28,04 €32,20 €26,61
 
Scharmüller Drawbar frame HVLB K80 W390 S32, 120,2 kN, 4000 kg
16%
Scharmüller
Drawbar frame HVLB K80 W390 S32, 120,2 kN, 4000 kg
suitable for: John Deere. Series: 7R (Tier 3). Category: Bearing supports. Versi...
€3.840,72 €3.174,15 €3.234,95 €2.673,51
 
LED work lights spotlight 24 W, 2200 lm, 190 x 105 x 74 mm
5%
LED work lights spotlight 24 W, 2200 lm, 190 x 105 x 74 mm
Nominal voltage: 12 / 24 V. Voltage range: 9 - 28 V. Bulb: LED. Bulbs included: ...
€321,62 €265,80 €305,50 €252,48
 
Cobo Headlight left / right 12 V, 60/55 W H4, attachment upright
10%
Cobo
Headlight left / right 12 V, 60/55 W H4, attachment upright
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal voltage: 12 V....
€170,38 €140,81 €154,15 €127,40
 
Scharmüller Drawbar frame rail 390 mm, guide 32 mm, 117 kN, 4000 kg
Scharmüller
Drawbar frame rail 390 mm, guide 32 mm, 117 kN, 4000 kg
Load capacity (kg): 4000 | Category: Lagerböcke | Guide width (mm): 32 | Version...
€1.817,75 €1.502,27
 
O-ring 12,3 x 3,5 mm John Deere 5080 - 7930
O-ring 12,3 x 3,5 mm John Deere 5080 - 7930
Version: Ø 12,3 x 3,5 mm
€2,95 €2,44
 
Sauermann Wear plate trailer coupling HS 1710-1KUD/3KUD
5%
Sauermann
Wear plate trailer coupling HS 1710-1KUD/3KUD
€172,30 €142,40 €163,65 €135,25
 
Showing 73 - 96 of 144

John Deere 7215R parts for heavy towing

Nobody buys a 7215R to pull a light trailer. Steered low loaders, big dump trailers and tankers on a fixed drawbar need a solid hitch setup, and that is where this page puts its weight. Of the more than 140 parts that fit the John Deere 7215R, many deal with hitching and towing. Manufacturers include Scharmüller, ROCKINGER, Sauermann, Walterscheid and GRANIT.

Forced steering and the hitch beneath it

A steered trailer axle needs a second link to the tractor alongside the ball or hook. For that you will find forced steering parts here, such as an insert for a Pick-Up Hitch and an inner part connecting the ball to the steering rod. Underneath sit the drawbars, drawbar frames, support plates and adapter plates. For implements with a drawbar eye there are flange hitches, and a drawbar support takes the strain out of lining up a heavy drawbar.

Air brakes to the trailer

Trailers with air brakes run two lines back from the tractor, and connector heads for those lines are available on this page. Keep the dust caps shut whenever nothing is coupled, and each time you uncouple, check that the rubber sealing ring in the head is intact. A split ring hisses audibly and makes the compressor work harder than it should. And never swap the colours, red is supply and yellow is brake.

Driving clutch plates, lights and small parts

For the driving clutch there are internal and external plates. Replace them as a full pack, and soak new friction plates in the correct oil for a while before fitting so they do not run in dry. You will also find LED work lights in several shapes, O-rings for the fuel line, sealing rings and telescopic mirror arms, which earn their keep on the road with wide implements.

Typ number and the 7R series

The 7215R belongs to the John Deere 7R series. The Typ number and serial number on the type plate tell you exactly which machine you have. For hitch parts, also measure the rail width and hole pattern of what is fitted now, and look for a reference number on old clutch plates or a lamp housing.

Other tractors in the series each have their own page:

The rest of the make is gathered under John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart