Menu
EUR

John Deere 7215R tractor parts & technical data

More than 140 parts that fit the John Deere 7215R from the 7R series are listed here, among them trailer couplings, lighting and electrics.

144 parts found for John Deere 7215R
Show:
MAHLE Gear reduction starter 12V 3,2 kW, 10 teeth clockwise, oil-tight
38%
MAHLE
Gear reduction starter 12V 3,2 kW, 10 teeth clockwise, oil-tight
€618,13 €510,85 €386,30 €319,26
 
Rail pressure sensor John Deere
5%
Rail pressure sensor John Deere
€294,03 €243,00 €279,30 €230,83
 
Gasket John Deere
Gasket John Deere
€7,20 €5,95
 
GRANIT Filler cap for expansion tank, opening pressure 1,13 bar
GRANIT
Filler cap for expansion tank, opening pressure 1,13 bar
Version: for expansion tank. Opening pressure: 1,13 bar.
€55,85 €46,16
 
Glow plug John Deere 5085E-7270R
Glow plug John Deere 5085E-7270R
€38,25 €31,61
 
GRANIT Fan clutch John Deere 7200R-7280R
5%
GRANIT
Fan clutch John Deere 7200R-7280R
€670,41 €554,06 €636,85 €526,32
 
Sleeve John Deere 7200R-8530
Sleeve John Deere 7200R-8530
€35,20 €29,09
 
Sauermann Forced steering left ball-Ø 50 mm, 69 x 50/80 mm John Deere
5%
Sauermann
Forced steering left ball-Ø 50 mm, 69 x 50/80 mm John Deere
Assembly notes: Anticlockwise. Colour: Green. Hole pattern: 69 x 50/80 mm. Ball ...
€913,55 €755,00 €867,85 €717,23
 
ROCKINGER Adaptor plate rail width 390 mm, hole pattern 160 x 100 mm, M20
20%
ROCKINGER
Adaptor plate rail width 390 mm, hole pattern 160 x 100 mm, M20
Load capacity: 4000 / 1000 kg. D-value: 98,1 kN. Rail width: 390 mm. Hole patter...
€574,63 €474,90 €462,00 €381,82
 
Scharmüller Pick-Up Hitch einsätze 80 shank 60 x 70 mm, 500 mm, bore 25 mm
Scharmüller
Pick-Up Hitch einsätze 80 shank 60 x 70 mm, 500 mm, bore 25 mm
suitable for: John Deere. Series: 7R (Tier 3). Category: Pick-up hitch. Version:...
€1.604,00 €1.325,62
 
Thrust washer John Deere 7200R-8530
Thrust washer John Deere 7200R-8530
€18,60 €15,37
 
GRANIT Expansion valve 3/8 inch o-ring John Deere 6010 - 9620RX
5%
GRANIT
Expansion valve 3/8 inch o-ring John Deere 6010 - 9620RX
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connection thread A...
€64,61 €53,40 €61,35 €50,70
 
Tensioning pulley Ø 75 mm, width 40 mm John Deere
5%
Tensioning pulley Ø 75 mm, width 40 mm John Deere
€79,88 €66,02 €75,85 €62,69
 
Pressure sensor SCR-katalysator John Deere
5%
Pressure sensor SCR-katalysator John Deere
€136,13 €112,50 €129,30 €106,86
 
GRANIT Hose to the turbocharger inner-Ø 50,8 / 57,15 mm John Deere
GRANIT
Hose to the turbocharger inner-Ø 50,8 / 57,15 mm John Deere
Inner Ø: 50,8 / 57,15 mm. Length: 86,3 mm.
€33,40 €27,60
 
V-belt tensioner Ø 75 mm, 40 mm wide, 24,5 Nm John Deere
5%
V-belt tensioner Ø 75 mm, 40 mm wide, 24,5 Nm John Deere
€261,59 €216,19 €248,50 €205,37
 
GRANIT Filter dryer airco Ø 102 mm, 190 mm, F/M #6 O-ring, steel
5%
GRANIT
Filter dryer airco Ø 102 mm, 190 mm, F/M #6 O-ring, steel
Length (mm): 190 | Outer Ø (mm): 102 | Connection thread: F/M #6 O-ring | Dimens...
€62,65 €51,78 €59,50 €49,17
 
Showing 121 - 144 of 144

John Deere 7215R parts for heavy towing

Nobody buys a 7215R to pull a light trailer. Steered low loaders, big dump trailers and tankers on a fixed drawbar need a solid hitch setup, and that is where this page puts its weight. Of the more than 140 parts that fit the John Deere 7215R, many deal with hitching and towing. Manufacturers include Scharmüller, ROCKINGER, Sauermann, Walterscheid and GRANIT.

Forced steering and the hitch beneath it

A steered trailer axle needs a second link to the tractor alongside the ball or hook. For that you will find forced steering parts here, such as an insert for a Pick-Up Hitch and an inner part connecting the ball to the steering rod. Underneath sit the drawbars, drawbar frames, support plates and adapter plates. For implements with a drawbar eye there are flange hitches, and a drawbar support takes the strain out of lining up a heavy drawbar.

Air brakes to the trailer

Trailers with air brakes run two lines back from the tractor, and connector heads for those lines are available on this page. Keep the dust caps shut whenever nothing is coupled, and each time you uncouple, check that the rubber sealing ring in the head is intact. A split ring hisses audibly and makes the compressor work harder than it should. And never swap the colours, red is supply and yellow is brake.

Driving clutch plates, lights and small parts

For the driving clutch there are internal and external plates. Replace them as a full pack, and soak new friction plates in the correct oil for a while before fitting so they do not run in dry. You will also find LED work lights in several shapes, O-rings for the fuel line, sealing rings and telescopic mirror arms, which earn their keep on the road with wide implements.

Typ number and the 7R series

The 7215R belongs to the John Deere 7R series. The Typ number and serial number on the type plate tell you exactly which machine you have. For hitch parts, also measure the rail width and hole pattern of what is fitted now, and look for a reference number on old clutch plates or a lamp housing.

Other tractors in the series each have their own page:

The rest of the make is gathered under John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart