Menu
EUR

John Deere 7215R tractor parts & technical data

More than 140 parts that fit the John Deere 7215R from the 7R series are listed here, among them trailer couplings, lighting and electrics.

144 parts found for John Deere 7215R
Show:
Internal plate PTO shaft 3,5 mm, inner 130,5 mm, outer 197,2 mm
Version: Thickness: 3.5 mm Inner: 130.5 mm Outer: 197.2 mm 42 splines More
Version: Thickness: 3.5 mm Inner: 130.5 mm Outer: 197.2 mm 42 splines
€76,58 €63,29 €72,75 €60,12
You save 5%
External plate thickness 6 mm, inner 247 mm, outer 329 mm
Version: thickness = 6 mm inner = 247 mm outer = 329 mm More
Version: thickness = 6 mm inner = 247 mm outer = 329 mm
€130,93 €108,21 €124,35 €102,77
You save 5%
Internal plate driving clutch 3,6 mm, inner 125 mm, outer 224,9 mm
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm More
Version: Thickness: 3.6 mm Inner: 125 mm Outer: 224.9 mm
€108,46 €89,64 €103,00 €85,12
You save 5%
Stabilus Gas strut 200 N, 475 mm, stroke 195 mm John Deere 7200R - 8370R
Stabilus
Newtons: 200 | d1 (mm): 8 | A (mm): 475 | Form: 6 | B (mm): 234,9 | Stroke (mm): 195 | d2 (mm): 18 More
Newtons: 200 | d1 (mm): 8 | A (mm): 475 | Form: 6 | B (mm): 234,9 | St...
€166,25 €137,40 €157,90 €130,50
You save 5%
MAHLE Gear reduction starter 12 V, 3,2 kW, 10 teeth clockwise, 238 mm
€556,64 €460,03 €347,85 €287,48
You save 38%
Denso Starter motor with reduction 12 V, 4,8 kW, 10 teeth, 245 mm, clamp 30 M12
€775,61 €641,00 €736,80 €608,93
You save 5%
PTO shaft end piece 1 3/8 inch 6 and 21 grooves, 540-540E-1000 rpm.
Version: 1 3/8", 6 grooves, 1 3/8", 21 grooves, Can be switched between 540/540E/1000 rpm. Reference no.: L173283, L168287. suitable for: John Deere. ... More
Version: 1 3/8", 6 grooves, 1 3/8", 21 grooves, Can be switched betwee...
€217,06 €179,39 €206,20 €170,41
You save 5%
GRANIT Fitting John Deere - 50 pieces
Fuel filter / diesel filters
€116,98 €96,68 €111,10 €91,82
You save 5%
GASKET SET Ø 80 mm John Deere
Dimensions: Ø 80 mm mm. More
Dimensions: Ø 80 mm mm.
€131,91 €109,02 €125,30 €103,55
You save 5%
Sauermann Drawbar ball 80 sliding bolt, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Sauermann
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 31,4 mm. Load capacity: 4000 kg. Colour: Black. D-value: 120 kN. Version: Sliding bolt. Lock: b... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 31,4 mm. Load c...
€1.659,15 €1.371,20 €1.501,10 €1.240,58
You save 10%
GRANIT Oil pressure switch transmission oil pressure
GRANIT
Version: Transmission oil pressure. More
Version: Transmission oil pressure.
€173,63 €143,50 €164,90 €136,28
You save 5%
HELLA Beacon H1 KL Rota Compact 12 V, 55 W, Ø 133 mm, 217 mm, push-on pin
HELLA
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 133 mm. Total height: 217 mm. Connection: Socket pipe. Protection clas... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€80,21 €66,29
HELLA Work lamp flood beam HB3 60 W, 174 x 122 x 120 mm, 12 V, upright
HELLA
Bulb: HB3. Bulbs included: Yes. Light function: Close-range illumination. Installation location: Universal. Dimensions W x H x D: 174 x 122 x 120 mm. ... More
Bulb: HB3. Bulbs included: Yes. Light function: Close-range illuminati...
€83,25 €68,80
LED work lights high-beam headlight 30 W, 3500 lm, 190 x 70 x 108 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Close-range/far-reaching illumination. Dimension... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€78,59 €64,95 €74,65 €61,69
You save 5%
Stabilus Gas strut 125 N, 425 mm, stroke 150 mm John Deere 7200R - 9620RX
Stabilus
Form: diverse | d1 (mm): 6 | Stroke (mm): 150 | A (mm): 425 | B (mm): 229,2 | d2 (mm): 15 | Newtons: 125 More
Form: diverse | d1 (mm): 6 | Stroke (mm): 150 | A (mm): 425 | B (mm): ...
€145,68 €120,40 €138,35 €114,34
You save 5%
Internal plate Hi-Lo 5,16 mm, inner 219 mm, outer 292 mm, 87 teeth
Version: 292 x 219 x 5,16 mm 87 teeth More
Version: 292 x 219 x 5,16 mm 87 teeth
€93,29 €77,10 €88,60 €73,22
You save 5%
Sauermann Cover trailer coupling Ø 8,2 mm HS 1700-1KUD / 3KUD 330 mm
Sauermann
Description: Ø 8.2 mm More
Description: Ø 8.2 mm
€91,02 €75,22 €86,45 €71,45
You save 5%
GRANIT External plate thickness 3 mm, inner 138 mm, outer 215 mm
GRANIT
Version: thickness = 3 mm inner = 138 mm outer = 215 mm More
Version: thickness = 3 mm inner = 138 mm outer = 215 mm
€66,94 €55,32 €63,55 €52,52
You save 5%
Showing 97 - 120 of 144

John Deere 7215R parts for heavy towing

Nobody buys a 7215R to pull a light trailer. Steered low loaders, big dump trailers and tankers on a fixed drawbar need a solid hitch setup, and that is where this page puts its weight. Of the more than 140 parts that fit the John Deere 7215R, many deal with hitching and towing. Manufacturers include Scharmüller, ROCKINGER, Sauermann, Walterscheid and GRANIT.

Forced steering and the hitch beneath it

A steered trailer axle needs a second link to the tractor alongside the ball or hook. For that you will find forced steering parts here, such as an insert for a Pick-Up Hitch and an inner part connecting the ball to the steering rod. Underneath sit the drawbars, drawbar frames, support plates and adapter plates. For implements with a drawbar eye there are flange hitches, and a drawbar support takes the strain out of lining up a heavy drawbar.

Air brakes to the trailer

Trailers with air brakes run two lines back from the tractor, and connector heads for those lines are available on this page. Keep the dust caps shut whenever nothing is coupled, and each time you uncouple, check that the rubber sealing ring in the head is intact. A split ring hisses audibly and makes the compressor work harder than it should. And never swap the colours, red is supply and yellow is brake.

Driving clutch plates, lights and small parts

For the driving clutch there are internal and external plates. Replace them as a full pack, and soak new friction plates in the correct oil for a while before fitting so they do not run in dry. You will also find LED work lights in several shapes, O-rings for the fuel line, sealing rings and telescopic mirror arms, which earn their keep on the road with wide implements.

Typ number and the 7R series

The 7215R belongs to the John Deere 7R series. The Typ number and serial number on the type plate tell you exactly which machine you have. For hitch parts, also measure the rail width and hole pattern of what is fitted now, and look for a reference number on old clutch plates or a lamp housing.

Other tractors in the series each have their own page:

The rest of the make is gathered under John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart