Menu
EUR

John Deere 8400 tractor parts & technical data

In the parts catalogue the John Deere 8400 belongs to the 8000/8000T range. Here you get more than 300 matching parts, including lighting and electrics.

332 parts found for John Deere 8400
Show:
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, John Deere green
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 100 kN. Colour: JD green. Technical data: Kugelkupplung... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.423,49 €1.176,44 €1.144,45 €945,83
You save 20%
Micro relay changeover contact 12 V, 20 - 30 A, 5-pin, without bracket
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal 6.3 mm, With parallel resistor for suppressing inductive interference voltage peaks. More
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal 6.3 ...
€13,60 €11,24
GRANIT Connector head M22 x 1,5 red, supply line, vehicle
GRANIT
Additional information: - For dual-line brake systems for vehicles - Connect the air brake system of the truck or tractor unit with the brake system o... More
Additional information: - For dual-line brake systems for vehicles - C...
€24,60 €20,33
HELLA Beacon KL 600 H1 orange, Ø 135 mm, push-on pin
HELLA
Mounting type: Pipe socket | Bulb: H1 | Power consumption (W): 55 | Bulbs included: Yes | Type: Halogen | Light function: Rotating | Colour: Yellow | ... More
Mounting type: Pipe socket | Bulb: H1 | Power consumption (W): 55 | Bu...
€139,80 €115,54
Denso Gear reduction starter 12 V, 5,0 kW, 11 teeth, Ø 92 mm, clockwise
€1.165,48 €963,21 €1.107,20 €915,04
You save 5%
Prestolite Starter motor with reduction 24 V, 7,5 kW, 12 teeth, clockwise
€732,86 €605,67 €696,20 €575,37
You save 5%
ROCKINGER Forced steering left K50, Rockinger drawbar frame 787880K01140
ROCKINGER
Lock: K50. Assembly notes: Anticlockwise. To fit: Rockinger ball insert or hitch support 787880K01140. More
Lock: K50. Assembly notes: Anticlockwise. To fit: Rockinger ball inser...
€653,40 €540,00 €525,30 €434,13
You save 20%
GRAMMER Tractor seat Maximo Basic MSG85/721
GRAMMER
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 260 mm. Seat width: 480 mm. Joystick console: Optional. S... More
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: ...
€1.305,84 €1.079,21 €1.240,50 €1.025,21
You save 5%
ROCKINGER Drawbar without sensor rail 330 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.014,60 €838,51 €776,85 €642,02
You save 23%
LED work lights spotlight 1900 lm, 20 W, 138 x 63 x 60 mm, 12/24 V
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 138 x 63 x 60 mm. Light function: Far-reaching illumination. Effective luminous f... More
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 1...
€49,19 €40,65 €46,70 €38,60
You save 5%
Philips Spherical bulb P21W standard 12 V, 21 W, BA15s, ECE - 10 pieces
Philips
Voltage (V): 12 | Power (watts): 21 | Socket: BA15s More
Voltage (V): 12 | Power (watts): 21 | Socket: BA15s
€14,60 €12,07
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€586,12 €484,40 €556,80 €460,17
You save 5%
ROCKINGER Trailer coupling hitch pin 30,6 mm, rail 330 mm, 2000 kg, black
ROCKINGER
Rail width (mm): 330 | Guide width (mm): 32 | Drawbar eye: DIN 11026 40 mm, DIN 11043 40 mm, DIN 74054 40 mm | D-value (kN): 120,0 | Type: RO 850 D | ... More
Rail width (mm): 330 | Guide width (mm): 32 | Drawbar eye: DIN 11026 4...
€1.079,32 €892,00 €867,75 €717,15
You save 20%
GRANIT Ball joint left 367 mm, 7/8" x 14, 1 1/4" x 12 L, taper 27,4 - 31 mm
GRANIT
A: 368 mm. C: 7/8" x 14 mm. D: 1 1/4" x 12 L mm. E: 27,4 mm. F: 31 mm. Taper: 27,4 - 31 mm. More
A: 368 mm. C: 7/8" x 14 mm. D: 1 1/4" x 12 L mm. E: 27,4 mm. F: 31 mm....
€150,39 €124,29 €142,85 €118,06
You save 5%
GRANIT Tie rod 367 mm, 7/8" x 14, 1 1/4" x 12 L, taper 27,4 - 31 mm
GRANIT
A: 368 mm. C: 7/8" x 14 mm. D: 1 1/4" x 12 L mm. E: 27,4 mm. F: 31 mm. Taper: 27,4 - 31 mm. More
A: 368 mm. C: 7/8" x 14 mm. D: 1 1/4" x 12 L mm. E: 27,4 mm. F: 31 mm....
€150,39 €124,29 €142,85 €118,06
You save 5%
PROBOSS Seat PROBOSS AS3510 air suspended, fabric, 510 mm, 12 V
PROBOSS
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 260 mm. Seat width: 510 mm. Joystick console: Optiona... More
Suspension: Air suspension. Upholstery type: Fabric. Seat contact swit...
€1.333,40 €1.101,98
Solenoid switch starter motor 12 V, 80 A, 3 schraubkontakt
Version: 12 V / 80 A, 3 screw connections. Additional information: Spulenwiderstand: 3.95-4.15 Temporärer Strom: 800 Amp. More
Version: 12 V / 80 A, 3 screw connections. Additional information: Spu...
€50,69 €41,89 €45,85 €37,89
You save 10%
GRANIT Potentiometer with lever control unit additional control device
GRANIT
Version: For control unit - additional control unit. More
Version: For control unit - additional control unit.
€198,70 €164,21
GRANIT LED work lights flood beam 60 W, 5680 lm, 110 x 159 x 85 mm, 12 / 24 V
GRANIT
Nominal voltage (V): 12 / 24 | Voltage range (V): 11 - 32 | Bulb: LED | Bulbs included: Yes | Light function: Close-range illumination | Dimensions W ... More
Nominal voltage (V): 12 / 24 | Voltage range (V): 11 - 32 | Bulb: LED ...
€182,88 €151,14 €165,45 €136,74
You save 10%
Hand pump M16 x 1,5 John Deere, Case IH, Fiat, Deutz-Fahr
€21,15 €17,48
GRANIT LED work light oval spotlight 65 W, 6000 lm John Deere 5085E - 8320R
GRANIT
Current (A): [email protected] [email protected] | Dimensions W x H x D (mm): 170 x 82 x 79 | Nominal voltage (V): 12 / 24 | No. of LEDs: 4 | Form: Oval | Mounting siz... More
Current (A): [email protected] [email protected] | Dimensions W x H x D (mm): 170 x 82 ...
€86,61 €71,58 €82,25 €67,98
You save 5%
Wabco Connector head yellow brake line M16 x 1,5, vehicle
Wabco
Version: Yellow, brake line. Connection: M16 x 1.5. Operating pressure max.: 10.0 bar. Vehicle/application: Yellow, brake, towing vehicle. More
Version: Yellow, brake line. Connection: M16 x 1.5. Operating pressure...
€27,45 €22,69
Showing 25 - 48 of 332

John Deere 8400 parts for cooling, cab comfort and hitching

The John Deere 8400 spends its working life on heavy draft jobs, and the parts that wear are the ones that keep it cool, keep the driver comfortable and keep implements attached. This page brings together more than 300 parts that fit the 8400, supplied by GRANIT alongside HELLA, Wabco, ROCKINGER and GRAMMER.

What fits the 8400

On the engine side there are fan clutches, thermostats, engine sensors and a hand pump for bleeding the fuel system. Seals, sealing rings and gaskets come in many forms, including a gasket for the exhaust gas recirculation valve. For the cab you will find air conditioning compressors and tractor seats such as the air suspended GRAMMER Maximo Professional, plus LED work lights from HELLA and others. At the rear there are drawbars and drawbar frames from ROCKINGER, Wabco connector heads for trailer air brakes and PTO shaft ends.

Checking a tired fan clutch

If your 8400 runs hot in summer even with a clean radiator, the fan clutch is a likely suspect. With the engine cold, turn the fan by hand. It should move with light resistance. After a run, with the engine at working temperature, that resistance should be clearly higher. If the fan spins just as easily hot as cold, or there is oil around the hub, the clutch is no longer engaging properly and replacing it is the only real cure. Since the thermostat sits in the same cooling circuit, it makes sense to change it at the same time.

Matching the right part

Start with the serial plate to confirm you are working on an 8400. After that, the quickest route is the reference number on the old part, moulded into a gasket or printed on the housing of a sensor or compressor. Some items fit several John Deere tractors and say so, such as sealing rings listed for the 7R, the 8R and the 8000 range. When in doubt, hold the old part next to the photo and description before you order.

Other tractors in the 8000 range

If you also look after another model from this range, it has its own page showing only the parts listed for that tractor, which keeps you from ordering for the wrong machine.

Every other model from the brand is listed under John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart