Menu
EUR

John Deere 8400 tractor parts & technical data

In the parts catalogue the John Deere 8400 belongs to the 8000/8000T range. Here you get more than 300 matching parts, including lighting and electrics.

332 parts found for John Deere 8400
Show:
Wabco Connector head red supply line M16 x 1,5, vehicle
Wabco
Version: Red, supply line. Connection: M16 x 1.5. Operating pressure max.: 10.0 bar. Vehicle/application: Red, supply, towing vehicle. More
Version: Red, supply line. Connection: M16 x 1.5. Operating pressure m...
€29,10 €24,05
GRANIT Hand pump M16 x 1,5 John Deere, Deutz-Fahr
GRANIT
Version: M16 x 1.5. More
Version: M16 x 1.5.
€18,10 €14,96
Oil pump John Deere 4240-9100
€390,95 €323,10 €371,40 €306,94
You save 5%
GRANIT Moulding hood John Deere
€38,70 €31,98
ROCKINGER Drawbar without sensor rail 330 mm, coupling pin 38 mm, JD green
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: JD green. Desc... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.019,62 €842,66 €780,70 €645,21
You save 23%
HELLA Number plate light R10W, 12/24 V, 102 x 55 x 57 mm - 2 pieces
HELLA
Version: For mounting above the number plate, or to the left and right of the number plate, test mark: E1 22819, plastic. Bulb: 12V10WK / R10W, 24V10W... More
Version: For mounting above the number plate, or to the left and right...
€35,80 €29,59
MANN-FILTER Cab filter CU2136, AF55829
€30,45 €25,17
Scharmüller Drawbar frame rail 390 mm, guide 32 mm, 100,2 kN, 4000 kg
Scharmüller
Guide width (mm): 32 | Version: vorbereitet Zugpendel | Category: Lagerböcke | Detent pin Ø (mm): 25 | D-value (kN): 100,2 | Colour: Claas Grau | Ra... More
Guide width (mm): 32 | Version: vorbereitet Zugpendel | Category: Lage...
€1.572,11 €1.299,26
FEBI Thermostat Ø 54 mm, 82 °C John Deere, Sabre
FEBI
To fit as: John Deere, Sabre. Tractor types: 4520, 4620, 3030, 3130 (from 235170), 4430, 4630, 3040, 3140, 3640, 4040S, 4240, 4240S, 4440, 4640, 4840,... More
To fit as: John Deere, Sabre. Tractor types: 4520, 4620, 3030, 3130 (f...
€24,08 €19,90 €11,17 €9,23
You save 54%
Starter ring gear Ø 385/415 mm, 129 teeth John Deere
Version: Ø 385/415, 129 teeth. More
Version: Ø 385/415, 129 teeth.
€97,51 €80,59 €92,60 €76,53
You save 5%
ROCKINGER Forced steering right K50, Rockinger drawbar frame 787880K01140
ROCKINGER
Lock: K50. Assembly notes: Right. To fit: Rockinger ball insert or hitch support 787880K01140. More
Lock: K50. Assembly notes: Right. To fit: Rockinger ball insert or hit...
€703,31 €581,25 €565,46 €467,32
You save 20%
GRAMMER Tractor seat Maximo Dynamic DDS air suspended fabric 550 mm
GRAMMER
To fit: John Deere. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 550 mm. Joystick c... More
To fit: John Deere. Suspension: Air suspension. Upholstery type: Fabri...
€3.130,35 €2.587,07
GRANIT Connecting rod bolt 64 mm John Deere
GRANIT
Dimensions: 64 mm. More
Dimensions: 64 mm.
€8,85 €7,31
Scharmüller Drawbar inner part 311 mm, coupling pin 38 mm, 2500 kg
Scharmüller
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 89,3 kN. Colour: AGCO grey. Desc... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.160,61 €959,18 €1.026,40 €848,26
You save 12%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 311 mm, 4000 kg
Scharmüller
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.122,52 €927,70 €992,75 €820,45
You save 12%
Scharmüller Pick-Up Hitch einsätze 80 shank 60 x 60 mm, 415 mm
Scharmüller
suitable for: Claas. Series: Ares 500/600. Category: Pick-up hitch. Version: ball 80. Colour: Pöttinger red. Dimensions: shaft height x width: 60 x 6... More
suitable for: Claas. Series: Ares 500/600. Category: Pick-up hitch. Ve...
€1.865,61 €1.541,83 €1.649,95 €1.363,60
You save 12%
LED work lights spotlight 6000 lm, 70 W, 173 x 129 x 56 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€71,51 €59,10 €67,90 €56,12
You save 5%
HELLA Beacon H1 KL Rotaflex 12 V, 55 W, Ø 135 mm, 222 mm, push-on pin
HELLA
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 135 mm. Total height: 222 mm. Connection: Socket pipe. Protection clas... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€139,80 €115,54
HELLA Rear light left / right with hybrid technology, 12 V
HELLA
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Colour: Yellow, red. Form: Rectangular. Cable length: - m. Installation location: Left, right. Nominal volta... More
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Colour: Yellow, red. Form: R...
€60,15 €49,71
Showing 49 - 72 of 332

John Deere 8400 parts for cooling, cab comfort and hitching

The John Deere 8400 spends its working life on heavy draft jobs, and the parts that wear are the ones that keep it cool, keep the driver comfortable and keep implements attached. This page brings together more than 300 parts that fit the 8400, supplied by GRANIT alongside HELLA, Wabco, ROCKINGER and GRAMMER.

What fits the 8400

On the engine side there are fan clutches, thermostats, engine sensors and a hand pump for bleeding the fuel system. Seals, sealing rings and gaskets come in many forms, including a gasket for the exhaust gas recirculation valve. For the cab you will find air conditioning compressors and tractor seats such as the air suspended GRAMMER Maximo Professional, plus LED work lights from HELLA and others. At the rear there are drawbars and drawbar frames from ROCKINGER, Wabco connector heads for trailer air brakes and PTO shaft ends.

Checking a tired fan clutch

If your 8400 runs hot in summer even with a clean radiator, the fan clutch is a likely suspect. With the engine cold, turn the fan by hand. It should move with light resistance. After a run, with the engine at working temperature, that resistance should be clearly higher. If the fan spins just as easily hot as cold, or there is oil around the hub, the clutch is no longer engaging properly and replacing it is the only real cure. Since the thermostat sits in the same cooling circuit, it makes sense to change it at the same time.

Matching the right part

Start with the serial plate to confirm you are working on an 8400. After that, the quickest route is the reference number on the old part, moulded into a gasket or printed on the housing of a sensor or compressor. Some items fit several John Deere tractors and say so, such as sealing rings listed for the 7R, the 8R and the 8000 range. When in doubt, hold the old part next to the photo and description before you order.

Other tractors in the 8000 range

If you also look after another model from this range, it has its own page showing only the parts listed for that tractor, which keeps you from ordering for the wrong machine.

Every other model from the brand is listed under John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart