Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Deutz D 7007 tractor parts & technical data

If the lights on your Deutz D 7007 have failed or the electrics are playing up, this page lists more than 200 parts that fit this 07 series tractor.

214 parts found for Deutz-Fahr D 7007
Show:
Alternator 14 V / 65 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor More
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Ze...
€183,88 €151,97 €169,17 €139,81
You save 8%
Window rubber clamping range 1 - 4 mm, b 19,4 mm, h 14,5 mm - 5 meter
Clamping range: 1 - 4 mm. Length: 5 m. B: 19,4 mm. H: 14,5 mm. More
Clamping range: 1 - 4 mm. Length: 5 m. B: 19,4 mm. H: 14,5 mm.
€58,43 €48,29 €53,76 €44,43
You save 8%
Silencer vertical 1130 mm, Ø 57/45 mm Deutz-Fahr
Version: Length: 1130 mm, Inner Ø: 57 mm, Outlet Ø: 45 mm. More
Version: Length: 1130 mm, Inner Ø: 57 mm, Outlet Ø: 45 mm.
€109,09 €90,16 €100,36 €82,94
You save 8%
Window rubber clamping range 2,2 mm, b 24 mm, h 22 mm - 5 meter
Clamping range: 2,2 mm. Length: 5 m. B: 24 mm. H: 22 mm. More
Clamping range: 2,2 mm. Length: 5 m. B: 24 mm. H: 22 mm.
€46,40 €38,35 €42,69 €35,28
You save 8%
BOSCH Start switch pull switch with gear change knob, Ø 10,5 mm
BOSCH
Version: Galvanised steel housing, including black control button, Power rating:, 50 A / 12 V, (terminals 17, 19), 27 A / 24 V (terminals 17, 19), 12 ... More
Version: Galvanised steel housing, including black control button, Pow...
€69,57 €57,50 €58,97 €48,74
You save 15%
Ball joint taper 16,2 - 18,3 mm, 101 mm, M14 x 1,5, M20 x 1,5
For track rod. Taper (mm): 16.2 - 18.3. Length (mm): 101. Outer thread (mm): M20 x 1.5. More
For track rod. Taper (mm): 16.2 - 18.3. Length (mm): 101. Outer thread...
€39,32 €32,50 €36,17 €29,90
You save 8%
Cylinder head with valves Deutz-Fahr
Engine types: FL912, FL913. Menke no.: 70536. More
Engine types: FL912, FL913. Menke no.: 70536.
€288,40 €238,35 €265,33 €219,28
You save 8%
Expansion tank 2-chamber 0,25 l, H 128,5 mm Deutz-Fahr
h: 95 mm. Nominal volume: 0,25 l. Fig.: A. H: 128,5 mm. More
h: 95 mm. Nominal volume: 0,25 l. Fig.: A. H: 128,5 mm.
€49,55 €40,95 €45,59 €37,67
You save 8%
Piston set, complete Ø 100 mm, combustion chamber 55 mm
Dimensions: 3 rings, Ø 100 mm, Gudgeon pin Ø 35 x 80 mm, Combustion chamber Ø 55 mm, Combustion chamber depth 15.6 mm. More
Dimensions: 3 rings, Ø 100 mm, Gudgeon pin Ø 35 x 80 mm, Combustion ...
€152,40 €125,95 €140,21 €115,87
You save 8%
Replacement key lock number 14610 - 2 pieces
Locking number: 14610. Version: Locking no. 14610. More
Locking number: 14610. Version: Locking no. 14610.
€15,70 €12,98
Alternator 14 V / 33 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Antonio Carraro, Case IH, Deutz-Fahr, Fendt, Goldoni, Holder, Renault, Schlüter More
To fit as: Antonio Carraro, Case IH, Deutz-Fahr, Fendt, Goldoni, Holde...
€197,74 €163,42 €181,92 €150,35
You save 8%
FEBI Ball joint taper 16,2 - 18,3 mm, 101 mm, M14 x 1,5, M20 x 1,5
FEBI
For track rod. Taper (mm): 16.2 - 18.3. Length (mm): 101. Outer thread (mm): M20 x 1.5. More
For track rod. Taper (mm): 16.2 - 18.3. Length (mm): 101. Outer thread...
€31,22 €25,80 €16,53 €13,66
You save 47%
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
€299,69 €247,68 €275,71 €227,86
You save 8%
Steering valve ew/dw 220 bar, 60 l/min, system SD60 Deutz
This control valve has been specially developed for Deutz tractors with SD60 hydraulics. Thanks to the high output up to four pieces can be flanged di... More
This control valve has been specially developed for Deutz tractors wit...
€663,73 €548,54 €610,63 €504,65
You save 8%
MANN-FILTER Fuel filter WK731
€10,74 €8,87
LUK Thrust bearing PTO clutch 75 x 115 x 20 mm
LUK
Dimensions (mm): 75 x 115 x 20 More
Dimensions (mm): 75 x 115 x 20
€183,54 €151,69 €168,86 €139,55
You save 8%
Control unit linkage 220 bar, 220 x Ø 57,9 mm Deutz SD60
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 40 l/min., Tightening torque: 25 Nm, Dimensions: 220 x Ø 57.9 mm. Menke no.... More
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: m...
€644,58 €532,71 €593,01 €490,09
You save 8%
Radiator grille Deutz-Fahr Series 07-07C, D 2807-7807C
€412,94 €341,27 €379,90 €313,97
You save 8%
HELLA Alternator 14 V, 33 A Case IH, Deutz-Fahr, John Deere
HELLA
Nominal values (V / A): 14 / 33 | Charging current (A): 33 | Nominal voltage (V): 14 | Additional information: Without pulley More
Nominal values (V / A): 14 / 33 | Charging current (A): 33 | Nominal v...
€354,91 €293,31 €273,45 €225,99
You save 23%
Steering column switch built-in, shift linkage 126 mm, blade terminal 8-pin
Version: Mounting, functions: indicators, horn, dipped beam/full beam changeover, headlight flasher, lever 126 mm long, blade terminal connection, 8-p... More
Version: Mounting, functions: indicators, horn, dipped beam/full beam ...
€76,69 €63,38 €70,55 €58,31
You save 8%
HELLA Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with cable
HELLA
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard warning light function, with cable and bracket. Additional information: • Rel... More
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard...
€80,43 €66,47 €77,45 €64,01
You save 4%
LUK Thrust bearing 55 x 90,5 x 22 mm
LUK
Dimensions (mm): 55 x 90.5 x 22 More
Dimensions (mm): 55 x 90.5 x 22
€192,19 €158,83 €176,81 €146,13
You save 8%
Bolt set 2de steering valve 3x M8 x 180
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Control unit. More
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Co...
€29,14 €24,08
Rivet copper 5 x 12 mm, DIN 7338-B - 100 pieces
Hole Ø: 5 mm. Length: 12 mm. d2: 9,5 mm. K: 1 mm. e: 2,5 mm. Material: Copper. DIN: 7338-B. More
Hole Ø: 5 mm. Length: 12 mm. d2: 9,5 mm. K: 1 mm. e: 2,5 mm. Material...
€56,12 €46,38 €51,63 €42,67
You save 8%
Alternator 14 V / 35 A, flange 56 mm, pulley Ø 68 mm, W-connection
Additional information: with W connection | Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Installation angle (°): l 60 | Charging current (A): 35 | Fo... More
Additional information: with W connection | Mounting L / d / R (mm): 5...
€122,13 €100,93 €112,36 €92,86
You save 8%
Rivet copper 5 x 10 mm, DIN 7338-B - 100 pieces
Hole Ø: 5 mm. Length: 10 mm. d2: 9,5 mm. K: 1 mm. e: 2,5 mm. Material: Copper. DIN: 7338-B. More
Hole Ø: 5 mm. Length: 10 mm. d2: 9,5 mm. K: 1 mm. e: 2,5 mm. Material...
€50,38 €41,64 €46,35 €38,31
You save 8%
LUK Clutch kit Deutz-Fahr D 6006 - D 7807, DX 3.70 - 3.90
LUK
Contents: Pressure plate 458231003111, clutch plate 458328012216 More
Contents: Pressure plate 458231003111, clutch plate 458328012216
€1.038,52 €858,28 €1.005,44 €830,94
You save 3%
LUK Thrust bearing driving clutch 65 x 96 x 23 mm
LUK
Dimensions (mm): 65 x 96 x 23 More
Dimensions (mm): 65 x 96 x 23
€162,37 €134,19 €149,38 €123,45
You save 8%
Thrust bearing driving clutch closed version 65 x 97 x 23 mm
Dimensions (mm): 65 x 97 x 23 More
Dimensions (mm): 65 x 97 x 23
€82,54 €68,21 €75,94 €62,76
You save 8%
Elring Cylinder head gasket set without cylinder head gasket engine FL912, FL913, BFL913
Elring
Supplementary set: For one cylinder head | Additional information: Without cylinder head gasket More
Supplementary set: For one cylinder head | Additional information: Wit...
€34,58 €28,57
MAHLE Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
€662,73 €547,71 €396,94 €328,05
You save 40%
Start switch 12 V pull switch, built-in Ø 10,5 mm, 0-1-2
Menke no.: 248055 | Switching stages: 0-1-2 | Version: Pull switch Protected against dripping water when installed vertically Mounting opening Ø 10.5... More
Menke no.: 248055 | Switching stages: 0-1-2 | Version: Pull switch Pro...
€60,35 €49,88
LUK Thrust bearing PTO shaft 70 x 110 x 20 mm
LUK
Dimensions (mm): 70 x 110 x 20 More
Dimensions (mm): 70 x 110 x 20
€116,29 €96,11 €106,99 €88,42
You save 8%
Clutch plate 250, 26 x 32 mm, 10 splines Deutz-Fahr
Dimensions (mm): 26 x 32, 10 grooves | Additional information: Made in Germany More
Dimensions (mm): 26 x 32, 10 grooves | Additional information: Made in...
€143,09 €118,26 €131,64 €108,80
You save 8%
Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Lamborghini
Dimensions (mm): 20 x 52 x 15 More
Dimensions (mm): 20 x 52 x 15
€11,65 €9,63
Fuel hose connection 14 / 8 mm Deutz-Fahr D 2807 - D 7807
€70,58 €58,33 €64,93 €53,66
You save 8%
Protective grille upper Deutz D 2807 - D 7807
€226,01 €186,79 €207,93 €171,84
You save 8%
LUK Double clutch 300 / 250TGA 36 x 42 mm, 8 splines, chain pitch 20 mm
LUK
Dimensions (mm): 36 x 42 8 grooves | web (mm): 20 | Flywheel dimension (mm): 36 (tief) More
Dimensions (mm): 36 x 42 8 grooves | web (mm): 20 | Flywheel dimension...
€1.022,10 €844,71 €940,33 €777,13
You save 8%
Bosch/Rexroth Hydraulic pump 11 cm³ anticlockwise, claw 17,8 x 8 Deutz-Fahr, Fendt
Bosch/Rexroth
Drive shaft: Claw, Ø 17.8 x 8 | Bosch no.: 1517222380 | Direction of rotation: Anticlockwise | Output volume (cc/rev): 11 More
Drive shaft: Claw, Ø 17.8 x 8 | Bosch no.: 1517222380 | Direction of ...
€582,33 €481,26 €535,74 €442,76
You save 8%
Bosch/Rexroth Hydraulic pump 16 cm³ anticlockwise, taper 1:5, Ø 17 x 17 Deutz-Fahr
Bosch/Rexroth
Bosch no.: 1517222359 | Direction of rotation: Anticlockwise | Output volume (cc/rev): 16 | Drive shaft: Taper 1:5, Ø 17 x 17 More
Bosch no.: 1517222359 | Direction of rotation: Anticlockwise | Output ...
€638,00 €527,27 €586,96 €485,09
You save 8%
LUK Clutch plate 280UKF 26 x 32 mm, 10 splines Deutz-Fahr
LUK
Dimensions (mm): 26 x 32 10 grooves More
Dimensions (mm): 26 x 32 10 grooves
€225,24 €186,15 €207,22 €171,26
You save 8%
Thrust bearing driving clutch 55 x 91,5 x 25 mm
Dimensions (mm): 55 x 91.5 x 25 More
Dimensions (mm): 55 x 91.5 x 25
€87,90 €72,64 €80,87 €66,83
You save 8%
Elring Gasket set top and bottom 4 cylinder engine F4L912, F4L913
Elring
Additional information: with crankshaft sealing ring / without cylinder head gasket More
Additional information: with crankshaft sealing ring / without cylinde...
€187,75 €155,17 €172,73 €142,75
You save 8%
FEBI Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
You save 57%
BOSCH Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
€569,55 €470,70 €548,54 €453,34
You save 4%
Repair set feed pump set of parts outer-Ø 41 mm Deutz-Fahr, Linde
€20,01 €16,54
Showing 1 - 48 of 214

Deutz D 7007 parts for a classic that still works for a living

On plenty of farms a D 7007 from the 07 series still pulls the trailer or the muck spreader. To keep it that way there are more than 200 parts for this model, from GRANIT, LUK, HELLA, Bosch/Rexroth and VICTOR REINZ.

Brakes, steering and clutch

For the brakes you will find brake shoes and the matching return springs. Always fit new springs with new shoes. A spring that has been heat cycled for years loses tension and lets the shoe drag lightly on the drum, which shows up as a warm drum after a run on the road.

On the steering side there are ball joints and a bolt set for the steering valve. If the steering has play, have someone rock the wheel back and forth while you feel each joint by hand. That quickly tells you which one is worn. Use a fresh split pin every time you refit a joint.

For the clutch there are clutch plates and thrust bearings, including a sealed release bearing for the main clutch.

Engine and fuel system

Around the Deutz engine there are crankshaft seals, sealing rings and shims. On the exhaust side you will find exhaust manifolds and gaskets. Old manifold studs and nuts often come off with half the rust attached, so use new fixings and a new gasket, or the joint will be blowing again within weeks.

In the fuel system, a repair set for the feed pump helps when the engine is slow to fire or needs lengthy bleeding after standing. A lockable tank cap with a vent is also available.

For the electrics there are starter motors and alternators. A sluggish starter is not always at fault itself, so check the battery terminals and the earth connection first.

Working out what you need

On a tractor of this age, something has usually been replaced along the way. That makes it worth laying the old part next to the new one. A number stamped into or printed on the part is the quickest point of comparison. The tractor type plate gives the model and chassis number, which help when you are choosing between two versions of a clutch plate or starter.

These Deutz tractors from the same 07 series have their own pages too:

Useful when there is more than one classic in the yard. Newer and other models are under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart