Deutz-Fahr Agrotron K 430 parts

A tractor like the Agrotron K 430 earns its keep on transport and field work, and that is exactly where the wear shows up first: in the rear hitch, the driver's seat, the lights and the electrics that get it started on a cold morning. This page brings together more than 160 replacement parts that fit this Deutz-Fahr, supplied by GRANIT alongside makers such as ROCKINGER, Walterscheid, GRAMMER and HELLA.

What you can fit to a K 430

The hitch side is well covered. There are automatic drawbars and Piton Fix pins for switching between trailers with a towing eye and heavier drawn implements. In the cab you will find complete tractor seats such as the GRAMMER Maximo Professional, separate PROBOSS seats, and gas struts for the roof hatch. For lighting there are flood beam work lamps and main headlights. Under the bonnet and in the driveline the choice runs from starter motors and air conditioning V-belts to injection pump O-rings, hydraulic pump seals, gaskets, pilot bearings and steering ball joints.

Matching a part to your tractor

Start with the type plate to confirm the exact model. For a drawbar, measure the rail width on the tractor and the locking pin diameter before choosing, because both have to match what is already bolted on. For seals, O-rings and gaskets the quickest route is the reference number stamped or printed on the old part. Compare it with the references in the product details and you can be sure of the size.

Workshop notes

• Pilot bearing: it sits in the centre of the flywheel and only becomes accessible when engine and gearbox are split. If the clutch is coming out anyway, replace the pilot bearing at the same time rather than splitting the tractor twice.
• Roof hatch strut: when the hatch will no longer stay open, the strut has lost its charge. Fit the new one with the rod pointing down where possible, which keeps the internal seal lubricated.
• Air conditioning belt: a glazed or cracked V-belt slips before it snaps. Check tension and condition at every service.

Related Agrotron K models

The neighbouring models in this range each have their own page showing only what fits them: the Deutz-Fahr Agrotron K 410, the Deutz-Fahr Agrotron K 420 and the Deutz-Fahr Agrotron K 610. Running several tractors of this make? The Deutz-Fahr parts overview gathers every model in one place.