Menu
EUR

Deutz-Fahr DX 6.50 tractor parts & technical data

More than 250 parts are listed for the Deutz-Fahr DX 6.50, a tractor from the DX 6 series. Trailer couplings, lighting and electrics are some of the groups.

271 parts found for Deutz-Fahr DX 6.50
Show:
Mirror black unheated 310 x 220 mm, rod Ø 16 - 18 mm
Tractor types: Deutz DX 80, 85, 86, 90, 92, 110, 120, 140, 145, 160, 230, 250, 3.10, 3.30, 3.50, 3.60, 3.65, 3.70, 3.80, 3.90, 4.10, 4.30, 4.50, 4.70,... More
Tractor types: Deutz DX 80, 85, 86, 90, 92, 110, 120, 140, 145, 160, 2...
€48,96 €40,46
GRAMMER Seat MSG95G/721 air suspended 12 V, seat width 480 mm
GRAMMER
Fore/aft isolator: Optional | Upholstery type: Fabric | Height (mm): 685 → 745 | Joystick console: Optional | On-board voltage (V): 12 | Restraint s... More
Fore/aft isolator: Optional | Upholstery type: Fabric | Height (mm): 6...
€2.181,17 €1.802,62
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 31 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.104,81 €913,07 €873,47 €721,88
You save 21%
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
Walterscheid
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ball hitches 80 according to ISO 24347. The 80 mm diameter ball can be... More
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for conn...
€2.146,48 €1.773,95 €1.697,03 €1.402,50
You save 21%
Alternator 14 V / 95 A, flange 56 mm
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | Pulley Ø (mm): - | Form: B | Flange size (mm): 56,0 | Nominal values (V / A): 1... More
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | ...
€193,94 €160,28 €178,42 €147,46
You save 8%
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
€299,69 €247,68 €275,71 €227,86
You save 8%
Hydraulic cylinder Deutz-Fahr DX 6.05-250, Series DX 6-7
€1.361,03 €1.124,82 €1.252,15 €1.034,83
You save 8%
Cylinder separate steering axle Deutz-Fahr DX 4.10-92, Series DX 4-6
€1.009,34 €834,17 €928,59 €767,43
You save 8%
HELLA Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with cable
HELLA
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard warning light function, with cable and bracket. Additional information: • Rel... More
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard...
€80,43 €66,47 €77,45 €64,01
You save 4%
LED work lights round Ø 120 mm floodlight 6800 lm, 60 W
Bulb: LED | Housing material: Aluminium | EMC: CISPR 25 class 3 | Voltage range (V): 10 - 30 | Power (watts): 60 | Protection class: IP6K9K / IP67 | W... More
Bulb: LED | Housing material: Aluminium | EMC: CISPR 25 class 3 | Volt...
€85,72 €70,84 €78,86 €65,18
You save 8%
GRAMMER Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VII
GRAMMER
Seat heater: Optional | Length (mm): 631 | Included in delivery: Seat supplied with seat contact switch and bracket for your existing control armrest.... More
Seat heater: Optional | Length (mm): 631 | Included in delivery: Seat ...
€2.132,30 €1.762,23
AKS-Dasis Blower switch 3 link steps Deutz-Fahr DX 4.10 - DX 120
AKS-Dasis
Equipment: 3 switching stages More
Equipment: 3 switching stages
€43,95 €36,32 €40,43 €33,42
You save 8%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Connection thread E: - More
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O...
€54,07 €44,69 €49,74 €41,11
You save 8%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Description: Manual Piton-Fix with elevator be... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.363,65 €1.126,98 €1.100,67 €909,64
You save 19%
ROCKINGER Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
ROCKINGER
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Detent pin Ø (mm): 25 | D-value (kN): 93,6 | Load capacity (kg): 2500 | Rail wi... More
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | ...
€651,63 €538,54 €627,60 €518,67
You save 4%
Bosch/Rexroth Hydraulic pump 22,5 cm³ left Deutz-Fahr DX 85 - 145
Bosch/Rexroth
Drive shaft: Splined shaft 17 x 14 9 splines | Adaptor plate hole pattern (mm): 60 x 60 (2 x) | Operating pressure max. (bar): 220 | Bosch no.: 151722... More
Drive shaft: Splined shaft 17 x 14 9 splines | Adaptor plate hole patt...
€653,73 €540,27 €601,43 €497,05
You save 8%
Scharmüller Drawbar frame 43,2 kN, rail 330 mm, guide 32 mm, pin Ø 25 mm
Scharmüller
Detent pin Ø (mm): 25 | Category: Bearing supports | Load capacity (kg): 2000 | Guide width (mm): 32 | Rail width (mm): 330 | Version: Prepared for d... More
Detent pin Ø (mm): 25 | Category: Bearing supports | Load capacity (k...
€1.074,22 €887,79 €1.038,28 €858,08
You save 3%
Clutch master cylinder Ø 25,4 mm gray cast iron Deutz-Fahr
Material: Grey cast iron | Hole Ø (mm): 25.4 More
Material: Grey cast iron | Hole Ø (mm): 25.4
€280,27 €231,63 €257,85 €213,10
You save 8%
LUK Thrust bearing PTO clutch 106 x 140 x 25 mm
LUK
Dimensions (mm): 106 x 140 x 25 More
Dimensions (mm): 106 x 140 x 25
€226,14 €186,89 €208,05 €171,94
You save 8%
MAHLE Alternator 14 V, 95 A, fastening 56 / 8,2 / 86 mm
MAHLE
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional information: Dust-tight, with fan | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Cha... More
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional info...
€334,90 €276,78 €200,59 €165,78
You save 40%
Elring Cylinder head gasket set without cylinder head gasket engine FL912, FL913, BFL913
Elring
Supplementary set: For one cylinder head | Additional information: Without cylinder head gasket More
Supplementary set: For one cylinder head | Additional information: Wit...
€34,58 €28,57
MAHLE Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
€662,73 €547,71 €396,94 €328,05
You save 40%
Master brake cylinder Ø 22,2 mm, DOT 4 Deutz-Fahr DX, AgroPrima, AgroXtra
€410,48 €339,24 €377,64 €312,10
You save 8%
Angle drive transmission 1:1, 1x M18 x 1,5, 1x M22 x 1,5
Version: VDO 33/83/1, Thread: 1 x M18 x 1.5, 1 x M22 x 1.5. More
Version: VDO 33/83/1, Thread: 1 x M18 x 1.5, 1 x M22 x 1.5.
€163,89 €135,45 €150,78 €124,61
You save 8%
HELLA Rear light 158 x 64 x 51 mm, 12 V, left, P21W, R10W
HELLA
Bulb: P21W, R10W. Width: 158 mm. Form: Rectangular. Height: 64 mm. Hole spacing: 45 mm. Dimensions W x H x D: 158 x 64 x 51 mm. Depth: 51 mm. Fixing: ... More
Bulb: P21W, R10W. Width: 158 mm. Form: Rectangular. Height: 64 mm. Hol...
€37,09 €30,65
Replacement key plastic-coated black, lock number 14607
Version: Locking no. 14607 | To fit: New Holland, Steyr More
Version: Locking no. 14607 | To fit: New Holland, Steyr
€7,59 €6,27
Walterscheid Trailer coupling hitch pin 38 mm, 65,7 kN, black Deutz-Fahr
Walterscheid
Description: This product is an automatic trailer hitch. The jaw dimensions and area of application comply with DIN 11028, RREG 2009/144/EC, VO (EU) 2... More
Description: This product is an automatic trailer hitch. The jaw dimen...
€2.193,20 €1.812,56 €1.733,96 €1.433,03
You save 21%
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Walterscheid
Description: This product is a ball hitch. The hitch ball 80 dimensions and areas of application comply with ISO 24347, VO (EU) 2015/208 and UN ECE R1... More
Description: This product is a ball hitch. The hitch ball 80 dimension...
€2.071,98 €1.712,38 €1.638,13 €1.353,83
You save 21%
Filter dryer airco 229 mm, Ø 76 mm, #6 3/8 o-ring Deutz-Fahr, Fendt
Material: Steel | Thread: #6 3/8 O-ring | Weight (g): 783 | Connection thread E: 3/8"" | Connection thread A: 3/8"" | Connection thread: 10 | Outer Ø... More
Material: Steel | Thread: #6 3/8 O-ring | Weight (g): 783 | Connection...
€60,62 €50,10 €55,77 €46,09
You save 8%
HELLA Alternator CA1433IR 14 V / 95 A without belt pulley
HELLA
Charging current (A): 95 | Nominal voltage (V): 14 | Additional information: Without pulley | Nominal values (V / A): 14 / 95 More
Charging current (A): 95 | Nominal voltage (V): 14 | Additional inform...
€503,99 €416,52 €388,33 €320,93
You save 23%
Wiper motor without integrated switch 12 V, 135°, M12 x 1
Volts: 12. W: konisch 8 x M6 mm. Angle: 135 °. A: 53 mm. B: 34 mm. C: 28 mm. D: M12 x 1 mm. E: 6 mm. F: M8 mm. G: 50-57 mm. Wiper blade length max.: ... More
Volts: 12. W: konisch 8 x M6 mm. Angle: 135 °. A: 53 mm. B: 34 mm. C:...
€145,99 €120,65 €134,31 €111,00
You save 8%
Stabilus Gas strut door-, for- or rear window 230 N, 502 mm, stroke 198 mm
Stabilus
To fit as: Deutz Door, windscreen or rear screen More
To fit as: Deutz Door, windscreen or rear screen
€47,75 €39,46 €43,93 €36,31
You save 8%
ROCKINGER Drawbar automatic 48,7 mm, 330 / 25 / 32 mm, 2000 kg, 93,6 kN
€2.805,57 €2.318,65 €2.211,65 €1.827,81
You save 21%
AKS-Dasis Air conditioning compressor 12 V, pulley Ø 152 mm, 175 ccm oil Deutz-Fahr
AKS-Dasis
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | Nominal voltage (V): 12 | Additional information: Cylinder head ID: B Inlet: 19.1 mm Outlet: 22.2 mm |... More
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | Nominal voltage (V): 1...
€504,50 €416,94 €464,14 €383,59
You save 8%
LUK Clutch kit 41 x 45 mm, 21 splines Deutz-Fahr DX 6.50, AgroStar 6.61
LUK
Dimensions (mm): 41 x 45 21 grooves 41 x 45 21 grooves | Contents: Pressure plate 458231003910, clutch plate 458331011710 More
Dimensions (mm): 41 x 45 21 grooves 41 x 45 21 grooves | Contents: Pre...
€1.508,37 €1.246,59 €1.437,70 €1.188,18
You save 5%
Clutch kit 310/310 sintered, 41 x 45 mm, 21 splines Deutz-Fahr
Dimensions (mm): 41 x 45, 21 grooves 41 x 45, 21 grooves | Additional information: Made in Germany More
Dimensions (mm): 41 x 45, 21 grooves 41 x 45, 21 grooves | Additional ...
€1.206,69 €997,26 €1.160,15 €958,80
You save 4%
Scharmüller Drawbar frame prepared for drawbar 270 mm, 43,2 kN Kubota M5N
Scharmüller
D-value (kN): 43,2 | Version: Prepared for drawbar | Colour: Kubota grey | Guide width (mm): 32 | Load capacity (kg): 1500 | Category: Bearing support... More
D-value (kN): 43,2 | Version: Prepared for drawbar | Colour: Kubota gr...
€1.378,56 €1.139,31 €1.318,28 €1.089,49
You save 4%
Scharmüller Drawbar frame 74 kN, 3000 kg, rail 330 mm, pin Ø 25 mm, draw pendulum
Scharmüller
D-value (kN): 74 | Version: Prepared for drawbar | Rail width (mm): 330 | Detent pin Ø (mm): 25 | Load capacity (kg): 3000 | Colour: Kubota grey | Gu... More
D-value (kN): 74 | Version: Prepared for drawbar | Rail width (mm): 33...
€1.288,81 €1.065,13 €1.235,71 €1.021,25
You save 4%
Filter dryer airco Ø 102 mm, 190 mm, F/M #6 O-ring, steel
Length (mm): 190 | Outer Ø (mm): 102 | Connection thread: F/M #6 O-ring | Dimensions (mm): - | Material: Steel More
Length (mm): 190 | Outer Ø (mm): 102 | Connection thread: F/M #6 O-ri...
€65,38 €54,03 €60,15 €49,71
You save 8%
Thrust bearing closed version 106 x 140 x 25 mm
Dimensions (mm): 106 x 140 x 25 More
Dimensions (mm): 106 x 140 x 25
€134,70 €111,32 €123,92 €102,42
You save 8%
GRAMMER Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VI
GRAMMER
Joystick console: Yes | Seat width (mm): 530 | Height (mm): 754 | Restraint system: Optional | - Super comfort seat with air suspension and 12V compre... More
Joystick console: Yes | Seat width (mm): 530 | Height (mm): 754 | Rest...
€2.293,87 €1.895,76
FEBI Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
You save 57%
FEBI Axial joint 208 mm, Ø 56 mm, M22 x 1,5 / M22 x 1,5
€212,35 €175,50 €38,55 €31,86
You save 82%
BOSCH Gear reduction starter 12 V, 3,0 kW, 9 teeth, Ø 89 mm, flange 31 mm
€512,28 €423,37 €493,38 €407,75
You save 4%
Universal joint 30 x 83 mm, 1x outer lubrication / centralised lubrication
A: 30 mm. B: 83 mm. Universal joint size: . Lubrication system: 1 x external lubrication/centralised lubrication. More
A: 30 mm. B: 83 mm. Universal joint size: . Lubrication system: 1 x ex...
€57,80 €47,77 €53,18 €43,95
You save 8%
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm. More
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm.
€33,53 €27,71
Showing 1 - 48 of 271

Deutz-Fahr DX 6.50 parts: cab, hitch, engine and hydraulics

On a DX 6.50 with a lot of hours behind it, the first complaints usually come from the cab. A door lock that no longer catches, a gas strut that will not hold the rear window, a push button for the work lamps that sticks. This page covers those small jobs and the larger ones too, with more than 250 Deutz-Fahr DX 6.50 parts.

In the cab

There are push button switches, gas struts for the door, front window and rear window, door locks and air suspended tractor seats. Fit a gas strut with the piston rod pointing down. That keeps the seal inside bathed in oil, and the strut holds its force for longer.

At the back

For towing there are automatic drawbars and drawbar frames from makers such as Walterscheid and ROCKINGER. On a hitch that has seen years of use, check the locking mechanism and the coupling pin for wear as well, not just the jaw.

Engine, lift and brakes

  • Crankshaft seals for both ends of the crank.
  • Piston ring sets and seal kits for an engine rebuild.
  • Sealing rings for the lift shaft and a gasket for the lift housing.
  • Seals for the hydraulic pump and shims for setting end play.
  • Repair sets for the brake cylinder.
  • Vented tank caps, including lockable versions.

Before fitting a brake cylinder repair set, look at the cylinder bore. If it is scored or pitted, new seals will not stop the leak, and the whole cylinder needs replacing instead. With the crankshaft seals, take care not to fit the new seal on the exact groove the old lip has worn into the shaft.

When the engine dies with fuel in the tank

A blocked vent in the tank cap lets vacuum build up as fuel is drawn off. After a while the engine starves and stops, even with a full tank. Before you suspect the lift pump, try running with the cap loosened. If the engine keeps going, a new vented cap solves it.

Finding the matching part

Your type plate should read DX 6.50. For seals, shims and sealing rings it all comes down to size, and the quickest way to get that is from the old part, which often has a reference number moulded or stamped into it. Besides GRANIT, Walterscheid and ROCKINGER, you will find PROBOSS and GRAMMER here. Other tractors from the brand are on Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart