Menu
EUR

Deutz-Fahr AgroStar 6.61 tractor parts & technical data

Whether you need trailer couplings, lighting or electrics, this page brings together more than 200 parts for the Deutz-Fahr AgroStar 6.61 tractor.

234 parts found for Deutz-Fahr AgroStar 6.61
Show:
Ball pin steel M8, wrench size 22, E 13 mm Deutz-Fahr
A: M8 mm. E: 13 mm. SW: 22. More
A: M8 mm. E: 13 mm. SW: 22.
€18,70 €15,45
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 31 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.104,81 €913,07 €873,47 €721,88
You save 21%
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
Walterscheid
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ball hitches 80 according to ISO 24347. The 80 mm diameter ball can be... More
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for conn...
€2.146,48 €1.773,95 €1.697,03 €1.402,50
You save 21%
Alternator 14 V / 95 A, flange 56 mm
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | Pulley Ø (mm): - | Form: B | Flange size (mm): 56,0 | Nominal values (V / A): 1... More
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | ...
€193,94 €160,28 €178,42 €147,46
You save 8%
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
€299,69 €247,68 €275,71 €227,86
You save 8%
HELLA Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with cable
HELLA
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard warning light function, with cable and bracket. Additional information: • Rel... More
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard...
€80,43 €66,47 €77,45 €64,01
You save 4%
LUK Clutch kit Deutz-Fahr AgroStar 4.61 - 4.78, 6.08 - 6.61
LUK
Contents: Pressure plate 458133023111, clutch plate 458333005911, release bearing 458500068500 More
Contents: Pressure plate 458133023111, clutch plate 458333005911, rele...
€1.229,18 €1.015,85 €1.130,85 €934,58
You save 8%
GRAMMER Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VII
GRAMMER
Seat heater: Optional | Length (mm): 631 | Included in delivery: Seat supplied with seat contact switch and bracket for your existing control armrest.... More
Seat heater: Optional | Length (mm): 631 | Included in delivery: Seat ...
€2.132,30 €1.762,23
Bolt set 2de steering valve 3x M8 x 180
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Control unit. More
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Co...
€29,14 €24,08
Walterscheid Trailer coupling hitch pin 38 mm, 65,6 kN, black Deutz-Fahr
Walterscheid
Colour: Black | Load capacity (kg): 2000 | Lock: Automatic, spherical hitch bolt | Included in delivery: Includes 1x coupling 770KU2000/758NB. Locking... More
Colour: Black | Load capacity (kg): 2000 | Lock: Automatic, spherical ...
€2.242,44 €1.853,26 €1.772,89 €1.465,20
You save 21%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Connection thread E: - More
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O...
€54,07 €44,69 €49,74 €41,11
You save 8%
ROCKINGER Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
ROCKINGER
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Detent pin Ø (mm): 25 | D-value (kN): 93,6 | Load capacity (kg): 2500 | Rail wi... More
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | ...
€651,63 €538,54 €627,60 €518,67
You save 4%
Bosch/Rexroth Hydraulic pump 22,5 cm³ left Deutz-Fahr DX 85 - 145
Bosch/Rexroth
Drive shaft: Splined shaft 17 x 14 9 splines | Adaptor plate hole pattern (mm): 60 x 60 (2 x) | Operating pressure max. (bar): 220 | Bosch no.: 151722... More
Drive shaft: Splined shaft 17 x 14 9 splines | Adaptor plate hole patt...
€653,73 €540,27 €601,43 €497,05
You save 8%
Clutch master cylinder Ø 25,4 mm gray cast iron Deutz-Fahr
Material: Grey cast iron | Hole Ø (mm): 25.4 More
Material: Grey cast iron | Hole Ø (mm): 25.4
€280,27 €231,63 €257,85 €213,10
You save 8%
LUK Thrust bearing PTO clutch 106 x 140 x 25 mm
LUK
Dimensions (mm): 106 x 140 x 25 More
Dimensions (mm): 106 x 140 x 25
€226,14 €186,89 €208,05 €171,94
You save 8%
MAHLE Alternator 14 V, 95 A, fastening 56 / 8,2 / 86 mm
MAHLE
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional information: Dust-tight, with fan | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Cha... More
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional info...
€334,90 €276,78 €200,59 €165,78
You save 40%
MAHLE Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
€662,73 €547,71 €396,94 €328,05
You save 40%
Step 340 x 160 x 30 mm Deutz-Fahr Agroprima, Agrostar, Agroxtra, DX
Dimensions: 340x160x30mm mm. More
Dimensions: 340x160x30mm mm.
€94,42 €78,03 €86,87 €71,79
You save 8%
Angle drive transmission 1:1, 1x M18 x 1,5, 1x M22 x 1,5
Version: VDO 33/83/1, Thread: 1 x M18 x 1.5, 1 x M22 x 1.5. More
Version: VDO 33/83/1, Thread: 1 x M18 x 1.5, 1 x M22 x 1.5.
€163,89 €135,45 €150,78 €124,61
You save 8%
Replacement key plastic-coated black, lock number 14607
Version: Locking no. 14607 | To fit: New Holland, Steyr More
Version: Locking no. 14607 | To fit: New Holland, Steyr
€7,59 €6,27
Walterscheid Trailer coupling hitch pin 38 mm, 65,7 kN, black Deutz-Fahr
Walterscheid
Description: This product is an automatic trailer hitch. The jaw dimensions and area of application comply with DIN 11028, RREG 2009/144/EC, VO (EU) 2... More
Description: This product is an automatic trailer hitch. The jaw dimen...
€2.193,20 €1.812,56 €1.733,96 €1.433,03
You save 21%
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Walterscheid
Description: This product is a ball hitch. The hitch ball 80 dimensions and areas of application comply with ISO 24347, VO (EU) 2015/208 and UN ECE R1... More
Description: This product is a ball hitch. The hitch ball 80 dimension...
€2.071,98 €1.712,38 €1.638,13 €1.353,83
You save 21%
HELLA Work lamp flood beam Double Beam H3 12 / 24 V, bending angle 25 - 35
HELLA
Installation location: Universal | Bulbs included: No | Connection: Open cable ends | Mounting type: Vertical/hanging, bracket mounting | Material: Ho... More
Installation location: Universal | Bulbs included: No | Connection: Op...
€92,05 €76,07 €88,64 €73,26
You save 4%
FTE Clutch slave cylinder Ø 23,81 mm Deutz-Fahr AgroStar 4.61 - 6.61
FTE
Material: Grey cast iron | Hole Ø (mm): 23,81 More
Material: Grey cast iron | Hole Ø (mm): 23,81
€1.025,74 €847,72 €943,68 €779,90
You save 8%
Filter dryer airco 229 mm, Ø 76 mm, #6 3/8 o-ring Deutz-Fahr, Fendt
Material: Steel | Thread: #6 3/8 O-ring | Weight (g): 783 | Connection thread E: 3/8"" | Connection thread A: 3/8"" | Connection thread: 10 | Outer Ø... More
Material: Steel | Thread: #6 3/8 O-ring | Weight (g): 783 | Connection...
€60,62 €50,10 €55,77 €46,09
You save 8%
HELLA Alternator CA1433IR 14 V / 95 A without belt pulley
HELLA
Charging current (A): 95 | Nominal voltage (V): 14 | Additional information: Without pulley | Nominal values (V / A): 14 / 95 More
Charging current (A): 95 | Nominal voltage (V): 14 | Additional inform...
€503,99 €416,52 €388,33 €320,93
You save 23%
Knott Industrietechnik Bleed valve Deutz-Fahr AgroPrima, AgroStar, AgroXtra
€35,13 €29,03 €32,32 €26,71
You save 8%
ROCKINGER Drawbar K80 rail width 330 mm, locking pin Ø 25 mm
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Description: Manual ball hitch with height-adju... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.285,58 €1.062,46 €990,51 €818,61
You save 23%
Stabilus Gas strut door-, for- or rear window 230 N, 502 mm, stroke 198 mm
Stabilus
To fit as: Deutz Door, windscreen or rear screen More
To fit as: Deutz Door, windscreen or rear screen
€47,75 €39,46 €43,93 €36,31
You save 8%
AKS-Dasis Air conditioning compressor 12 V, pulley Ø 152 mm, 175 ccm oil Deutz-Fahr
AKS-Dasis
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | Nominal voltage (V): 12 | Additional information: Cylinder head ID: B Inlet: 19.1 mm Outlet: 22.2 mm |... More
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | Nominal voltage (V): 1...
€504,50 €416,94 €464,14 €383,59
You save 8%
LUK Clutch kit 41 x 45 mm, 21 splines Deutz-Fahr DX 6.50, AgroStar 6.61
LUK
Dimensions (mm): 41 x 45 21 grooves 41 x 45 21 grooves | Contents: Pressure plate 458231003910, clutch plate 458331011710 More
Dimensions (mm): 41 x 45 21 grooves 41 x 45 21 grooves | Contents: Pre...
€1.508,37 €1.246,59 €1.437,70 €1.188,18
You save 5%
Clutch kit 310/310 sintered, 41 x 45 mm, 21 splines Deutz-Fahr
Dimensions (mm): 41 x 45, 21 grooves 41 x 45, 21 grooves | Additional information: Made in Germany More
Dimensions (mm): 41 x 45, 21 grooves 41 x 45, 21 grooves | Additional ...
€1.206,69 €997,26 €1.160,15 €958,80
You save 4%
Filter dryer airco Ø 102 mm, 190 mm, F/M #6 O-ring, steel
Length (mm): 190 | Outer Ø (mm): 102 | Connection thread: F/M #6 O-ring | Dimensions (mm): - | Material: Steel More
Length (mm): 190 | Outer Ø (mm): 102 | Connection thread: F/M #6 O-ri...
€65,38 €54,03 €60,15 €49,71
You save 8%
Thrust bearing closed version 106 x 140 x 25 mm
Dimensions (mm): 106 x 140 x 25 More
Dimensions (mm): 106 x 140 x 25
€134,70 €111,32 €123,92 €102,42
You save 8%
GRAMMER Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VI
GRAMMER
Joystick console: Yes | Seat width (mm): 530 | Height (mm): 754 | Restraint system: Optional | - Super comfort seat with air suspension and 12V compre... More
Joystick console: Yes | Seat width (mm): 530 | Height (mm): 754 | Rest...
€2.293,87 €1.895,76
FEBI Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
You save 57%
FEBI Axial joint 208 mm, Ø 56 mm, M22 x 1,5 / M22 x 1,5
€212,35 €175,50 €38,55 €31,86
You save 82%
BOSCH Gear reduction starter 12 V, 3,0 kW, 9 teeth, Ø 89 mm, flange 31 mm
€512,28 €423,37 €493,38 €407,75
You save 4%
Knott Industrietechnik Bleed valve Knott version Deutz
€15,98 €13,20
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm. More
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm.
€33,53 €27,71
Gasket silencer engine FL912, FL913 Deutz-Fahr
Motor No: BFL913, BF6M1013. More
Motor No: BFL913, BF6M1013.
€18,89 €15,61
Force sensor pin 60 kN, 160 mm, Ø 36,8 mm Deutz-Fahr, Lamborghini
Length: 160 mm. Ø: 36,8 mm. Dimensions: Length = 160, Ø = 36.8 mm. More
Length: 160 mm. Ø: 36,8 mm. Dimensions: Length = 160, Ø = 36.8 mm.
€374,78 €309,74 €344,80 €284,96
You save 8%
Rotary switch on / off, 3 blade terminals, Ø 12 mm
Version: Universal, circuit: on/off, 3 blade terminals, mounting opening Ø 12 mm / 8 mm mounting thickness More
Version: Universal, circuit: on/off, 3 blade terminals, mounting openi...
€106,69 €88,17 €98,15 €81,12
You save 8%
SACHS Thrust bearing 106 x 140 x 25 mm
SACHS
Dimensions (mm): 106 x 140 x 25 More
Dimensions (mm): 106 x 140 x 25
€205,54 €169,87 €189,10 €156,28
You save 8%
Elring Cylinder head bolt set M12 x 1,75 x 211 mm, wrench size 17 - 4 pieces
Elring
Notes: Set of 4 | Dimensions (mm): M12 x 1.75 x 211 | Supplementary set: For one cylinder head | AF (mm): 17 More
Notes: Set of 4 | Dimensions (mm): M12 x 1.75 x 211 | Supplementary se...
€118,56 €97,98 €109,08 €90,14
You save 8%
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
Version: Ø 393/364 mm, 129 teeth. More
Version: Ø 393/364 mm, 129 teeth.
€82,99 €68,59 €76,35 €63,10
You save 8%
Seal feed pump
€2,89 €2,39
Showing 1 - 48 of 234

Deutz-Fahr AgroStar 6.61 parts for seals, clutch and cab

Oil weeping from the lift housing, a cab door that no longer stays open, a clutch that starts to slip under heavy draft work. On an AgroStar 6.61 with plenty of hours behind it, these are familiar jobs. This page brings together more than 200 replacement parts that fit this tractor, from makers such as GRANIT, HELLA, Walterscheid, ROCKINGER and Knott Industrietechnik.

Stopping leaks on engine and linkage

For sealing work there are sealing rings, individual seals, complete seal kits and gaskets. Examples include the lift shaft sealing ring, the lift housing gasket and a thin seal for the hydraulic pump. You will also find crankshaft seals for the Deutz engine, shims for setting end play and bleed valves.

A tip for the crankshaft seal: inspect the running surface on the shaft before fitting anything. If the old seal has worn a groove into it, a new seal sitting in exactly the same spot will soon leak again. Clean the surface, wipe a little engine oil on the lip and press the seal in squarely with a suitable drift rather than tapping the seal itself with a hammer.

Driveline, hitch and cab

The driveline side covers clutch kits and V-belts. A belt that squeals or shows glazed flanks is due for replacement, and where two belts run side by side, change them as a pair so they share the load evenly. At the rear there are drawbars for the linkage.

Around the cab you will find gas struts for the door and windows, door locks, contact switches and tractor seats. If a window has to be bonded back in, there is a repair set with sealant and primer. When two gas struts carry the same window, replace both together, otherwise the tired old strut leaves the new one doing all the work.

Picking the part that fits

When a part comes in more than one version, check the type plate of your AgroStar and note the model and chassis number. If you still have the worn part, look for a stamped or cast reference number on it. That number makes it quick to match the old part against what you see on this page.

Running other tractors from the AgroStar series as well? Each of these models has its own page listing the parts that suit it:

Every other model from the brand is listed under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart