Menu
EUR

Deutz-Fahr AgroXtra 4.57 tractor parts & technical data

We carry more than 350 parts for the Deutz-Fahr AgroXtra 4.57. Work through the trailer couplings, electrics and lighting groups to find what fits your tractor.

350 parts found for Deutz-Fahr AgroXtra 4.57
Show:
Alternator 14 V / 65 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor More
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Ze...
€176,21 €145,63 €167,35 €138,31
You save 5%
LED headlight dipped beam / main beam / marker light, 140 x 140 x 88 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Dipped beam/full beam/position light. Installati... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€104,85 €86,65 €94,85 €78,39
You save 10%
Cylinder head with valves Deutz-Fahr
Engine types: FL912, FL913. Menke no.: 70536. More
Engine types: FL912, FL913. Menke no.: 70536.
€276,38 €228,41 €262,55 €216,98
You save 5%
GRANIT Ball joint 210 mm, taper 24 - 26 mm, M22 x 1,5 / M22 x 1,5
GRANIT
A: 210 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 210 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€82,79 €68,42 €78,65 €65,00
You save 5%
Master brake cylinder Ø 22,2 mm, DOT 4 Deutz-Fahr DX, AgroPrima, AgroXtra
€393,37 €325,10 €373,70 €308,84
You save 5%
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
€287,19 €237,35 €272,80 €225,45
You save 5%
VICTOR REINZ Crankshaft seal rear Fendt, Deutz-Fahr
€41,09 €33,96 €39,00 €32,23
You save 5%
GRANIT Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
GRANIT
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, Flange to lever end: 26 mm. Menke no.: 45815. More
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacin...
€35,00 €28,93
HELLA Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with cable
HELLA
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard warning light function, with cable and bracket. Additional information: • Rel... More
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard...
€77,45 €64,01
Brake cylinder rear drum brake bore Ø 38,1 mm, DOT4 Deutz-Fahr
Medium: DOT4. Hole Ø: 38.1 mm. More
Medium: DOT4. Hole Ø: 38.1 mm.
€440,92 €364,40 €418,85 €346,16
You save 5%
PROBOSS Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
PROBOSS
Air suspension with 12V compressor. Fore/aft isolator. Continuous height adjustment, longitudinal adjustment and backrest tilt adjustment. Mechanical ... More
Air suspension with 12V compressor. Fore/aft isolator. Continuous heig...
€792,55 €655,00
Clutch kit double clutch Deutz-Fahr AgroPrima, AgroXtra, DX
Contents: Double clutch, clutch plate and 2x release bearing More
Contents: Double clutch, clutch plate and 2x release bearing
€1.055,12 €872,00 €1.002,35 €828,39
You save 5%
GRANIT Valve seat ring inlet valve Fendt, Deutz-Fahr
GRANIT
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913. More
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€34,09 €28,17 €32,35 €26,74
You save 5%
GRANIT Angle drive transmission 1:1, 1x M18 x 1,5, 1x M22 x 1,5
GRANIT
Version: VDO 33/83/1, Thread: 1 x M18 x 1.5, 1 x M22 x 1.5. More
Version: VDO 33/83/1, Thread: 1 x M18 x 1.5, 1 x M22 x 1.5.
€164,91 €136,29 €149,20 €123,31
You save 10%
GRANIT Rear light right 155 x 60 x 52 mm, 12 V, hole spacing 45 mm
GRANIT
Nominal voltage: 12 V. Installation location: Right. Bulb: 12V10WK / R10W, 12V21WK / P21W. Bulbs included: No. Light function: Indicator light, rear l... More
Nominal voltage: 12 V. Installation location: Right. Bulb: 12V10WK / R...
€70,90 €58,60 €64,10 €52,98
You save 10%
GRANIT Gas strut door-, for- or rear window 200 N, 505 mm
GRANIT
suitable for: Tür-, Front- oder Heckscheibe. Newtons: 200. A: 505 mm. B: 365 mm. C: 13 mm. D: 13 mm. Form: 6. To fit: door screen, windscreen or rear... More
suitable for: Tür-, Front- oder Heckscheibe. Newtons: 200. A: 505 mm....
€49,90 €41,24 €47,40 €39,17
You save 5%
Clutch kit flywheel 3 mm raised Deutz, Deutz-Fahr
To fit as: Deutz DX 4.10, 4.30 ,4.31, 4.50, 4.51, 4.70, 5.30, 5.50, 5.70, 6.05, Agroprima 4.31, 4.51, 4.56, 6.06, 6.16 More
To fit as: Deutz DX 4.10, 4.30 ,4.31, 4.50, 4.51, 4.70, 5.30, 5.50, 5....
€1.072,39 €886,27 €970,25 €801,86
You save 10%
Repair set feed pump set of parts outer-Ø 41 mm
To fit as: Pierburg and Imsa. More
To fit as: Pierburg and Imsa.
€19,15 €15,83
Mirror black unheated 310 x 220 mm, rod Ø 16 - 18 mm
Tractor types: Deutz DX 80, 85, 86, 90, 92, 110, 120, 140, 145, 160, 230, 250, 3.10, 3.30, 3.50, 3.60, 3.65, 3.70, 3.80, 3.90, 4.10, 4.30, 4.50, 4.70,... More
Tractor types: Deutz DX 80, 85, 86, 90, 92, 110, 120, 140, 145, 160, 2...
€48,95 €40,45
FEBI Turbocharger Deutz DX 4.50, 4.70, DX ab 8692, AgroPrima 4.51
FEBI
Turbocharger Deutz DX 4.50, 4.70, DX ab 8692, AgroPrima 4.51 More
Turbocharger Deutz DX 4.50, 4.70, DX ab 8692, AgroPrima 4.51
€960,41 €793,73
GRANIT Ball joint 225 mm, M20 x 1,5, M22 x 1,5, taper 23,5 - 26,5 mm
GRANIT
A: 225 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5 - 26,5 mm. More
A: 225 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. T...
€78,70 €65,04 €74,75 €61,78
You save 5%
GRANIT Cylinder head Deutz-Fahr
GRANIT
Engine types: BFL913, BFL913T. More
Engine types: BFL913, BFL913T.
€283,89 €234,62 €269,65 €222,85
You save 5%
Force sensor pin 60 kN, 160 mm, Ø 36,8 mm Deutz-Fahr, Lamborghini
Length: 160 mm. Ø: 36,8 mm. Dimensions: Length = 160, Ø = 36.8 mm. More
Length: 160 mm. Ø: 36,8 mm. Dimensions: Length = 160, Ø = 36.8 mm.
€359,15 €296,82 €341,15 €281,94
You save 5%
Showing 1 - 24 of 350

Deutz-Fahr AgroXtra 4.57 parts for the big jobs and the small ones

An AgroXtra 4.57 kept in daily work will eventually need its engine, clutch or brakes going through. This page brings together more than 350 parts that fit the Deutz-Fahr AgroXtra 4.57, with brands such as VICTOR REINZ, LUK, ROCKINGER, HELLA and GRANIT, so a rebuild can be planned in one go.

Brakes and linkage

Fixed calipers are available for the brakes. After fitting one, bleed the system and check that the brake frees off completely when released, as a dragging caliper overheats quickly. For the linkage there are lift shaft sealing rings for the left and right side.

Engine rebuild

Cylinder liner shims, crankshaft seals, exhaust gaskets, further seals and a repair set for the feed pump cover the engine. Shims set how far each liner stands proud of the block. Measure that protrusion at several points around the liner once it is fitted. If it is out, even a brand new head gasket will not seal reliably.

When fitting a crankshaft seal, avoid running the new lip on the exact groove the old one wore into the shaft. Oil the lip lightly and press the seal in squarely. A dry lip on a worn track will start leaking again before long.

Clutch

Clutch kits and thrust bearings, from LUK among others, cover the clutch. Always fit a new thrust bearing with a new clutch. Splitting the tractor a second time for one bearing is a job nobody wants. With the clutch out, inspect the flywheel for scoring and heat cracks.

Electrics and cab

Starter motors, alternators and a V-belt handle starting and charging, and a push button switch controls the work lamps. Check the tension of a new V-belt again after the first hours of running, since a new belt stretches slightly as it beds in. In the cab there are tractor seats and gas struts for the door and windows.

Matching parts to your AgroXtra 4.57

Start with the rating plate to be sure the tractor is an AgroXtra 4.57. Seals often carry their size moulded on the ring itself, while starters and alternators have a reference number on the housing. That number is the fastest way to match an old part with one on this page.

The Deutz-Fahr AgroXtra 6.07 from the same range has its own page. If you run both, order for each type separately. All other tractors from the make are listed under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart