Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Deutz-Fahr AgroStar 6.11 tractor parts & technical data

Is there a Deutz-Fahr AgroStar 6.11 on your farm? Here are more than 250 parts for this model, including electrics, lighting and trailer couplings.

277 parts found for Deutz-Fahr AgroStar 6.11
Show:
Alternator 14 V / 65 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor More
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Ze...
€183,88 €151,97 €169,17 €139,81
You save 8%
Piston set, complete Ø 100 mm, combustion chamber 55 mm
Dimensions: 3 rings, Ø 100 mm, Gudgeon pin Ø 35 x 80 mm, Combustion chamber Ø 55 mm, Combustion chamber depth 15.6 mm. More
Dimensions: 3 rings, Ø 100 mm, Gudgeon pin Ø 35 x 80 mm, Combustion ...
€152,40 €125,95 €140,21 €115,87
You save 8%
Ball pin steel M8, wrench size 22, E 13 mm Deutz-Fahr
A: M8 mm. E: 13 mm. SW: 22. More
A: M8 mm. E: 13 mm. SW: 22.
€18,70 €15,45
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 31 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.104,81 €913,07 €873,47 €721,88
You save 21%
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
€299,69 €247,68 €275,71 €227,86
You save 8%
LUK Clutch kit Deutz-Fahr AgroStar 4.61 - 6.38
LUK
Contents: Pressure plate 458133023111, clutch plate 458333006511, release bearing 458500068500 More
Contents: Pressure plate 458133023111, clutch plate 458333006511, rele...
€1.343,78 €1.110,56 €1.286,28 €1.063,04
You save 4%
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
Walterscheid
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ball hitches 80 according to ISO 24347. The 80 mm diameter ball can be... More
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for conn...
€2.146,48 €1.773,95 €1.697,03 €1.402,50
You save 21%
LUK Clutch kit Deutz-Fahr AgroStar 4.61 - 4.78, 6.08 - 6.61
LUK
Contents: Pressure plate 458133023111, clutch plate 458333005911, release bearing 458500068500 More
Contents: Pressure plate 458133023111, clutch plate 458333005911, rele...
€1.229,18 €1.015,85 €1.130,85 €934,58
You save 8%
Alternator 14 V / 95 A, flange 56 mm
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | Pulley Ø (mm): - | Form: B | Flange size (mm): 56,0 | Nominal values (V / A): 1... More
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | ...
€193,94 €160,28 €178,42 €147,46
You save 8%
HELLA Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with cable
HELLA
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard warning light function, with cable and bracket. Additional information: • Rel... More
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard...
€80,43 €66,47 €77,45 €64,01
You save 4%
GRAMMER Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VII
GRAMMER
Seat heater: Optional | Length (mm): 631 | Included in delivery: Seat supplied with seat contact switch and bracket for your existing control armrest.... More
Seat heater: Optional | Length (mm): 631 | Included in delivery: Seat ...
€2.132,30 €1.762,23
Bolt set 2de steering valve 3x M8 x 180
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Control unit. More
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Co...
€29,14 €24,08
GRAMMER Tractor seat air suspended Maximo Professional fabric, seat width 530 mm
GRAMMER
Super comfort seat with low-frequency air suspension and 12V compressor. APS: automatic positioning system. Armrests height adjustable and folding. Ad... More
Super comfort seat with low-frequency air suspension and 12V compresso...
€1.991,23 €1.645,64
MAHLE Alternator 14 V / 80 A, flange 56 mm, pulley-Ø 68 mm
MAHLE
Additional information: Dust-tight with W connection | Flange size (mm): 56,0 | Charging current (A): 80 | Nominal voltage (V): 14 | Pulley Ø (mm): 6... More
Additional information: Dust-tight with W connection | Flange size (mm...
€358,59 €296,36 €214,78 €177,50
You save 40%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Connection thread E: - More
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O...
€54,07 €44,69 €49,74 €41,11
You save 8%
Alternator 14 V / 65 A, flange 56 mm Deutz-Fahr, Fendt, Steyr
Charging current (A): 65 | Mounting L / d / R (mm): 56,0 / 8,0 / 86,0 | Installation angle (°): l 60 | Nominal voltage (V): 14 | Direction of rotatio... More
Charging current (A): 65 | Mounting L / d / R (mm): 56,0 / 8,0 / 86,0 ...
€170,34 €140,78 €156,71 €129,51
You save 8%
Angle drive transmission 1:1, 1x M18 x 1,5, 1x M22 x 1,5
Version: VDO 33/83/1, Thread: 1 x M18 x 1.5, 1 x M22 x 1.5. More
Version: VDO 33/83/1, Thread: 1 x M18 x 1.5, 1 x M22 x 1.5.
€163,89 €135,45 €150,78 €124,61
You save 8%
Walterscheid Trailer coupling hitch pin 38 mm, 65,6 kN, black Deutz-Fahr
Walterscheid
Colour: Black | Load capacity (kg): 2000 | Lock: Automatic, spherical hitch bolt | Included in delivery: Includes 1x coupling 770KU2000/758NB. Locking... More
Colour: Black | Load capacity (kg): 2000 | Lock: Automatic, spherical ...
€2.242,44 €1.853,26 €1.772,89 €1.465,20
You save 21%
Bosch/Rexroth Hydraulic pump 22,5 cm³ left Deutz-Fahr DX 85 - 145
Bosch/Rexroth
Drive shaft: Splined shaft 17 x 14 9 splines | Adaptor plate hole pattern (mm): 60 x 60 (2 x) | Operating pressure max. (bar): 220 | Bosch no.: 151722... More
Drive shaft: Splined shaft 17 x 14 9 splines | Adaptor plate hole patt...
€653,73 €540,27 €601,43 €497,05
You save 8%
Scharmüller Drawbar frame 43,2 kN, rail 330 mm, guide 32 mm, pin Ø 25 mm
Scharmüller
Detent pin Ø (mm): 25 | Category: Bearing supports | Load capacity (kg): 2000 | Guide width (mm): 32 | Rail width (mm): 330 | Version: Prepared for d... More
Detent pin Ø (mm): 25 | Category: Bearing supports | Load capacity (k...
€1.074,22 €887,79 €1.038,28 €858,08
You save 3%
Clutch master cylinder Ø 25,4 mm gray cast iron Deutz-Fahr
Material: Grey cast iron | Hole Ø (mm): 25.4 More
Material: Grey cast iron | Hole Ø (mm): 25.4
€280,27 €231,63 €257,85 €213,10
You save 8%
LUK Thrust bearing driving clutch 65 x 96 x 23 mm
LUK
Dimensions (mm): 65 x 96 x 23 More
Dimensions (mm): 65 x 96 x 23
€162,37 €134,19 €149,38 €123,45
You save 8%
Thrust bearing driving clutch closed version 65 x 97 x 23 mm
Dimensions (mm): 65 x 97 x 23 More
Dimensions (mm): 65 x 97 x 23
€82,54 €68,21 €75,94 €62,76
You save 8%
MAHLE Alternator 14 V, 95 A, fastening 56 / 8,2 / 86 mm
MAHLE
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional information: Dust-tight, with fan | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Cha... More
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional info...
€334,90 €276,78 €200,59 €165,78
You save 40%
MAHLE Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
€662,73 €547,71 €396,94 €328,05
You save 40%
Walterscheid Trailer coupling hitch pin 38 mm, 65,7 kN, black Deutz-Fahr
Walterscheid
Description: This product is an automatic trailer hitch. The jaw dimensions and area of application comply with DIN 11028, RREG 2009/144/EC, VO (EU) 2... More
Description: This product is an automatic trailer hitch. The jaw dimen...
€2.193,20 €1.812,56 €1.733,96 €1.433,03
You save 21%
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Walterscheid
Description: This product is a ball hitch. The hitch ball 80 dimensions and areas of application comply with ISO 24347, VO (EU) 2015/208 and UN ECE R1... More
Description: This product is a ball hitch. The hitch ball 80 dimension...
€2.071,98 €1.712,38 €1.638,13 €1.353,83
You save 21%
HELLA Work lamp flood beam Double Beam H3 12 / 24 V, bending angle 25 - 35
HELLA
Installation location: Universal | Bulbs included: No | Connection: Open cable ends | Mounting type: Vertical/hanging, bracket mounting | Material: Ho... More
Installation location: Universal | Bulbs included: No | Connection: Op...
€92,05 €76,07 €88,64 €73,26
You save 4%
FTE Clutch slave cylinder Ø 23,81 mm Deutz-Fahr AgroStar 4.61 - 6.61
FTE
Material: Grey cast iron | Hole Ø (mm): 23,81 More
Material: Grey cast iron | Hole Ø (mm): 23,81
€1.025,74 €847,72 €943,68 €779,90
You save 8%
Filter dryer airco 229 mm, Ø 76 mm, #6 3/8 o-ring Deutz-Fahr, Fendt
Material: Steel | Thread: #6 3/8 O-ring | Weight (g): 783 | Connection thread E: 3/8"" | Connection thread A: 3/8"" | Connection thread: 10 | Outer Ø... More
Material: Steel | Thread: #6 3/8 O-ring | Weight (g): 783 | Connection...
€60,62 €50,10 €55,77 €46,09
You save 8%
HELLA Alternator CA1433IR 14 V / 95 A without belt pulley
HELLA
Charging current (A): 95 | Nominal voltage (V): 14 | Additional information: Without pulley | Nominal values (V / A): 14 / 95 More
Charging current (A): 95 | Nominal voltage (V): 14 | Additional inform...
€503,99 €416,52 €388,33 €320,93
You save 23%
Knott Industrietechnik Bleed valve Deutz-Fahr AgroPrima, AgroStar, AgroXtra
€35,13 €29,03 €32,32 €26,71
You save 8%
Force sensor pin 60 kN, 160 mm, Ø 36,8 mm Deutz-Fahr, Lamborghini
Length: 160 mm. Ø: 36,8 mm. Dimensions: Length = 160, Ø = 36.8 mm. More
Length: 160 mm. Ø: 36,8 mm. Dimensions: Length = 160, Ø = 36.8 mm.
€374,78 €309,74 €344,80 €284,96
You save 8%
Repair set polyurethane beglazingskit, Terostat primer - 310 ml
Contents: - Polyurethane direct glazing sealant, - Terostat primer, - Wool wiper, - Application nozzle, - Cleaner, - Cleaning sponge, - Instructions (... More
Contents: - Polyurethane direct glazing sealant, - Terostat primer, - ...
€58,03 €47,96 €53,39 €44,12
You save 8%
Hood catch Deutz-Fahr
€86,59 €71,56 €79,66 €65,84
You save 8%
Step 340 x 160 x 30 mm Deutz-Fahr Agroprima, Agrostar, Agroxtra, DX
Dimensions: 340x160x30mm mm. More
Dimensions: 340x160x30mm mm.
€94,42 €78,03 €86,87 €71,79
You save 8%
Replacement key plastic-coated black, lock number 14607
Version: Locking no. 14607 | To fit: New Holland, Steyr More
Version: Locking no. 14607 | To fit: New Holland, Steyr
€7,59 €6,27
Stabilus Gas strut door-, for- or rear window 230 N, 502 mm, stroke 198 mm
Stabilus
To fit as: Deutz Door, windscreen or rear screen More
To fit as: Deutz Door, windscreen or rear screen
€47,75 €39,46 €43,93 €36,31
You save 8%
AKS-Dasis Air conditioning compressor 12 V, pulley Ø 152 mm, 175 ccm oil Deutz-Fahr
AKS-Dasis
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | Nominal voltage (V): 12 | Additional information: Cylinder head ID: B Inlet: 19.1 mm Outlet: 22.2 mm |... More
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | Nominal voltage (V): 1...
€504,50 €416,94 €464,14 €383,59
You save 8%
Scharmüller Drawbar frame prepared for drawbar 270 mm, 43,2 kN Kubota M5N
Scharmüller
D-value (kN): 43,2 | Version: Prepared for drawbar | Colour: Kubota grey | Guide width (mm): 32 | Load capacity (kg): 1500 | Category: Bearing support... More
D-value (kN): 43,2 | Version: Prepared for drawbar | Colour: Kubota gr...
€1.378,56 €1.139,31 €1.318,28 €1.089,49
You save 4%
Scharmüller Drawbar frame 74 kN, 3000 kg, rail 330 mm, pin Ø 25 mm, draw pendulum
Scharmüller
D-value (kN): 74 | Version: Prepared for drawbar | Rail width (mm): 330 | Detent pin Ø (mm): 25 | Load capacity (kg): 3000 | Colour: Kubota grey | Gu... More
D-value (kN): 74 | Version: Prepared for drawbar | Rail width (mm): 33...
€1.288,81 €1.065,13 €1.235,71 €1.021,25
You save 4%
MAHLE Alternator 14 V / 65 A, flange 56 mm, form B Deutz-Fahr, Fendt, Steyr
MAHLE
Nominal values (V / A): 14 / 65 | Direction of rotation: ↻ | Additional information: Dust-tight | Installation angle (°): l 60 | Mounting L / d / R... More
Nominal values (V / A): 14 / 65 | Direction of rotation: ↻ | Additio...
€326,57 €269,89 €195,60 €161,65
You save 40%
Filter dryer airco Ø 102 mm, 190 mm, F/M #6 O-ring, steel
Length (mm): 190 | Outer Ø (mm): 102 | Connection thread: F/M #6 O-ring | Dimensions (mm): - | Material: Steel More
Length (mm): 190 | Outer Ø (mm): 102 | Connection thread: F/M #6 O-ri...
€65,38 €54,03 €60,15 €49,71
You save 8%
MAHLE Alternator 14 V, 65 A, flange 56 mm, with fan
MAHLE
Belt width (mm) / type: - | Direction of rotation: ↻ | Nominal values (V / A): 14 / 65 | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Nominal voltag... More
Belt width (mm) / type: - | Direction of rotation: ↻ | Nominal value...
€303,54 €250,86 €181,80 €150,25
You save 40%
Alternator 14 V, 65 A, flange 56 mm, pulley Ø 73 mm
Additional information: With W connection | Charging current (A): 65 | Belt width (mm) / type: 9,7 | Installation angle (°): l + r 60 | Nominal volta... More
Additional information: With W connection | Charging current (A): 65 |...
€144,18 €119,16 €132,65 €109,62
You save 8%
GRAMMER Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VI
GRAMMER
Joystick console: Yes | Seat width (mm): 530 | Height (mm): 754 | Restraint system: Optional | - Super comfort seat with air suspension and 12V compre... More
Joystick console: Yes | Seat width (mm): 530 | Height (mm): 754 | Rest...
€2.293,87 €1.895,76
FEBI Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
You save 57%
Showing 1 - 48 of 277

Deutz-Fahr AgroStar 6.11 parts for engine work and servicing

Stripping the engine on an AgroStar 6.11 is a job you want to do once, with every gasket and seal on the bench before you start. This page lists more than 250 parts that fit the Deutz-Fahr AgroStar 6.11, from GRANIT, HELLA, VICTOR REINZ, MAHLE and Walterscheid.

Engine parts

  • Cylinder head gaskets and exhaust gaskets
  • Crankshaft seals for the Deutz engine
  • Shims for the cylinder liners
  • Seal kits
  • Repair sets for the fuel feed pump

Measure liner protrusion before choosing shims

The shim under the collar of each cylinder liner sets how far the liner stands proud of the block. Too little protrusion and the head gasket is not clamped properly, which leads to a blown gasket. During a rebuild, measure the protrusion of every liner with a dial gauge and choose the shim thickness from that reading. Reusing the old shims without measuring is a gamble, as they settle over the years. Then torque the cylinder head down in the correct sequence and in stages.

Beyond the engine

The electrical side is covered with alternators and starter motors. For the driveline there are clutch plates, including versions with a torsion damper. The hydraulics get sealing rings for the lift shaft, and the brakes get fixed calipers supplied complete without lining. In the cab you will find door locks and gas struts for the door and windows, and at the back there are drawbar frames.

One more workshop habit: a new crankshaft seal can leak if its lip runs in the groove worn by the old one. Clean the shaft, oil the lip lightly and, if the groove is deep, press the new seal in slightly less far so it runs on clean metal.

Finding the matching part

The serial number of your AgroStar 6.11 is on the type plate. For engine parts the engine type matters as well, and that is marked on the block. The reference number on an old alternator, starter or caliper makes the comparison with the parts on this page straightforward.

Other AgroStar models

The AgroStar series includes these tractors, each with its own page:

If you run one of them next to the 6.11, check fitment on that model's own page. Older Deutz tractors and other ranges are on the page with all Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart