Menu
EUR

Deutz-Fahr 5100 G tractor parts & technical data

Seat worn out or trailer coupling due for replacement on a Deutz-Fahr 5100 G? More than 40 parts for this 5 G series tractor are here, engine parts included.

42 parts found for Deutz-Fahr 5100 G
Show:
Fender bracket left complete SAME, Hürlimann, Deutz-Fahr, Lamborghini
GRAMMER Seat MSG95G/721 air suspended 12 V, seat width 480 mm
GRAMMER
Fore/aft isolator: Optional | Upholstery type: Fabric | Height (mm): 685 → 745 | Joystick console: Optional | On-board voltage (V): 12 | Restraint s... More
Fore/aft isolator: Optional | Upholstery type: Fabric | Height (mm): 6...
€2.181,17 €1.802,62
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 31 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.104,81 €913,07 €873,47 €721,88
You save 21%
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.104,81 €913,07 €873,47 €721,88
You save 21%
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
Walterscheid
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ball hitches 80 according to ISO 24347. The 80 mm diameter ball can be... More
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for conn...
€2.146,48 €1.773,95 €1.697,03 €1.402,50
You save 21%
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Walterscheid
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg, from 40 km/h 2,000 kg. More
Quick height adjustment with rotation lock, load capacity up to 40 km/...
€2.111,26 €1.744,84 €1.719,18 €1.420,81
You save 19%
GRAMMER Seat contact switches IHC, New Holland, Deutz 125 mm, 4-pin
GRAMMER
Sitzoberteil: 721, 722, 731, 741 | Seat contact switch CASE / NEW HOLLAND / DEUTZ version Cable length 125 mm with 4-pin AMP connector plug Make conta... More
Sitzoberteil: 721, 722, 731, 741 | Seat contact switch CASE / NEW HOLL...
€106,34 €87,88 €97,83 €80,85
You save 8%
Fender bracket right complete
€376,68 €311,31 €346,55 €286,40
You save 8%
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.207,08 €997,59 €954,33 €788,70
You save 21%
Clutch slave cylinder mineral oil Agrofarm, Agrolux, Agroplus
€116,00 €95,87 €106,72 €88,20
You save 8%
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Walterscheid
Description: This product is a ball hitch. The hitch ball 80 dimensions and areas of application comply with ISO 24347, VO (EU) 2015/208 and UN ECE R1... More
Description: This product is a ball hitch. The hitch ball 80 dimension...
€2.071,98 €1.712,38 €1.638,13 €1.353,83
You save 21%
LED headlight dipped beam 12 / 24 V, 84 x 89 x 92 mm, HB3/9005
Current (A): [email protected] [email protected] | Voltage range (V): 10 - 30 | Light function: Dipped beam | EMC: CISPR 25 class 3 | Housing material: Aluminium | Bu... More
Current (A): [email protected] [email protected] | Voltage range (V): 10 - 30 | Light ...
€90,15 €74,50 €82,94 €68,54
You save 8%
Headlight 12 V, H4, R2, W5W, Ø 139 mm, vertical
Bulb: H4, R2, W5W | Dimensions W x H x D (mm): Ø139/131x75 | Protection class: IP66 | Light function: Dipped beam, full beam, position light | Mounti... More
Bulb: H4, R2, W5W | Dimensions W x H x D (mm): Ø139/131x75 | Protecti...
€98,49 €81,40 €90,61 €74,89
You save 8%
GRAMMER Tractor seat Maximo Professional air suspended 530 mm
GRAMMER
Track gauge (mm): 260 | Rückenverlängerung: Yes | Lordosenstütze: Mechanical | Seat contact switch: Yes | Upholstery type: Fabric | Armrest: Yes | ... More
Track gauge (mm): 260 | Rückenverlängerung: Yes | Lordosenstütze: M...
€3.612,71 €2.985,71
Sauermann Cover trailer coupling Ø 16,2 mm HS 1700-1KUD / 3KUD 390 mm
Sauermann
Description: SDF Ø 16.2 mm More
Description: SDF Ø 16.2 mm
€55,93 €46,22 €51,46 €42,53
You save 8%
Sauermann Drawbar 38 mm, 330 / 25 / 32 mm, 2500 kg, 97,1 kN
Sauermann
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 97,1 kN. Colour: Black. Referenc... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.018,93 €842,09 €937,42 €774,72
You save 8%
Fan clutch with cooling fan
€529,49 €437,60 €487,13 €402,59
You save 8%
Spring fender left SAME, Hürlimann, Deutz-Fahr, Lamborghini
€89,14 €73,67 €82,01 €67,78
You save 8%
Sauermann Drawbar inner part 330 mm, coupling pin 31 mm, 2500 kg
Sauermann
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 32 mm. Load capacity: 2500 kg. D-value: 97,1 kN. Colour: Black. Version:... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€809,65 €669,13 €744,88 €615,60
You save 8%
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Colour: Black. Description: This product is a b... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.152,79 €1.779,17 €1.702,02 €1.406,63
You save 21%
AdBlue-filter Deutz-Fahr, Hürlimann, Lamborghini, Same
€184,85 €152,77 €170,06 €140,55
You save 8%
Sauermann Drawbar deep jaw 38 mm, 330 / 25 / 32 mm, 2000 kg, 97,1 kN
Sauermann
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Drawbar ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€997,77 €824,60 €917,95 €758,64
You save 8%
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.820,72 €1.504,73 €1.439,48 €1.189,65
You save 21%
Exhaust gas cooler Deutz Agroplus F Keyline 70-80, 4070E-4100E
Description: In common rail engine technology, the exhaust gas coolers have the important task of cooling the exhaust gases to the right temperature s... More
Description: In common rail engine technology, the exhaust gas coolers...
€1.210,03 €1.000,03
Tank cap for expansion tank
Version: For expansion tank. More
Version: For expansion tank.
€33,84 €27,97 €31,13 €25,73
You save 8%
NOX sensor Deutz-Fahr, Hürlimann, Lamborghini, Same
€1.198,72 €990,68 €1.102,82 €911,42
You save 8%
Seal EGR valve SAME, Hürlimann, Deutz-Fahr, Lamborghini
€46,76 €38,64 €43,02 €35,55
You save 8%
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.748,75 €1.445,25 €1.382,58 €1.142,63
You save 21%
Walterscheid Piton Fix rail width 309 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.723,50 €1.424,38 €1.362,61 €1.126,13
You save 21%
Spring fender right SAME, Hürlimann, Deutz-Fahr, Lamborghini
€89,02 €73,57 €81,90 €67,68
You save 8%
Cylinder Deutz-Fahr, Hürlimann, Lamborghini
€257,50 €212,81 €236,90 €195,79
You save 8%

Deutz-Fahr 5100 G parts for hitching, cooling and engine

The list for the 5100 G is compact, with more than 40 parts that fit the Deutz-Fahr 5100 G. It covers hitching, cooling and engine parts, and a few items for the fenders. The makers are GRANIT, Walterscheid, Sauermann and GRAMMER.

Cooling and belt drive

For the cooling system there is a water pump, a water pump seal, an expansion tank cap and temperature sensors. The belt drive is covered by a V-belt tensioner and an idler pulley.

When you fit a new water pump, give the tensioner and idler pulley some attention as well. Spin each one by hand. Any rumble or roughness means the bearing is worn, and with the belt already off, this is the time to replace them. After refilling, check the coolant level again once the engine has been warm.

Engine and exhaust

Engine parts include injectors, a cylinder, exhaust seals and NOX sensors. Every injector goes back in with a new sealing ring under the nozzle, and the seat in the cylinder head should be cleaned thoroughly first.

A temperature sensor that reads wrong can confuse the engine management. Change it with the engine cold and catch the coolant that runs out. While you are there, look at the rubber ring on the expansion tank cap. A cracked ring cannot hold pressure, and the cooling system suffers for it.

Hitching and fenders

At the rear you can choose ball drawbars, a Walterscheid ball hitch, top drawbars and Piton Fix hooks. Measure the rail width and the pin diameter on your own tractor's frame before ordering so the new part slots in. A little grease on the guide keeps the frame adjustable, and after every change of height, make sure the locking pin has fully engaged.

If a fender has caught a gatepost or a hedge on a narrow track, there is a fender bracket and a fender spring here too.

Selecting the correct part

Check that the rating plate reads 5100 G and write down the serial number. Water pumps, tensioners and injectors normally carry a reference number, stamped into the metal or on a label. Compare it with the number in the product description before you order. If you cannot find one, a photo of the old part will help us.

Right now the 5100 G is the only model from the 5 G series with a page of its own. For other models from the brand, including the other ranges, go to Deutz-Fahr parts.

Brands
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart