Menu
EUR

John Deere 1550 tractor parts & technical data

More than 550 parts fit the John Deere 1550. From lighting and electrics to trailer couplings, everything is gathered here so you can skip the long search.

555 parts found for John Deere 1550
Show:
HELLA Indicator/position light right 95 x 85 x 54 mm, 12V21WK / R21W Claas
HELLA
Bulb: P21W, 12V5WS / C5W, 12V21WK / R21W. Colour: Yellow, white. Connection: Blade terminal. Width: 95 mm. Form: Rectangular, two sides rounded. Heigh... More
Bulb: P21W, 12V5WS / C5W, 12V21WK / R21W. Colour: Yellow, white. Conne...
€57,60 €47,60
Tank sender with plastic tank
Version: With plastic tank. More
Version: With plastic tank.
€191,08 €157,92 €172,85 €142,85
You save 10%
Optibelt V-belt engine cooling John Deere 940-5410
Optibelt
To fit as: John Deere More
To fit as: John Deere
€48,15 €39,79 €43,55 €35,99
You save 10%
GRANIT Fuel filter Ø 126 mm, inner-Ø 94 mm
GRANIT Expansion valve 3/8 - 1/2 inch o-ring John Deere 1170 - 7800
GRANIT
Connection thread A: # 8, 1/2"" O-ring | Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring More
Connection thread A: # 8, 1/2"" O-ring | Equipment: O-ring | Connectio...
€66,20 €54,71 €62,85 €51,94
You save 5%
Wabco Pressure relief valve 20 bar, inschakeldruk 16 bar, M16 x 1,5
Wabco
Operating pressure max. (bar): 20 | Fixing: Hole Ø 8.2 x 57 mm | Opening pressure (bar): p2 + 2,5 | Output pressure (bar): 7,4 + 0,2 | Inlet connecti... More
Operating pressure max. (bar): 20 | Fixing: Hole Ø 8.2 x 57 mm | Open...
€252,65 €208,80 €240,00 €198,35
You save 5%
Internal plate Hi-Lo 2,3 mm, inner 152,3 mm, outer 191,9 mm, 6 teeth
Version: thickness = 2,3 mm inner = 152,3 mm outer = 191,9 mm 6 teeth More
Version: thickness = 2,3 mm inner = 152,3 mm outer = 191,9 mm 6 teeth
€47,66 €39,39 €45,25 €37,40
You save 5%
External plate 1,5 mm, inner 99 mm, outer 152 mm, 6 teeth John Deere
Version: thickness = 1,5 mm inner = 99 mm outer = 152 mm 6 teeth More
Version: thickness = 1,5 mm inner = 99 mm outer = 152 mm 6 teeth
€38,82 €32,08 €36,85 €30,45
You save 5%
GRANIT Internal plate PTO clutch 2,5 mm, inner 92,8 mm, outer 133,2 mm
GRANIT
Version: Thickness: 2.5 mm Inner: 92.8 mm Outer: 133.2 mm 45 splines More
Version: Thickness: 2.5 mm Inner: 92.8 mm Outer: 133.2 mm 45 splines
€32,90 €27,19
Clutch plate 280 GSPZ 22,3 x 25,8 mm, 15 splines, torsion damper
Dimensions (mm): 22.3 x 25.8, 15 grooves | Additional information: Made in Germany More
Dimensions (mm): 22.3 x 25.8, 15 grooves | Additional information: Mad...
€290,74 €240,28 €276,20 €228,26
You save 5%
GRANIT Valve cover gasket John Deere 6505 - 7810, WTS 9540 - 9580
€48,93 €40,44 €46,45 €38,39
You save 5%
GRANIT As hydraulic pump John Deere 840 - 3650
€120,64 €99,70 €114,60 €94,71
You save 5%
Prestolite Alternator 12 V, 70 A, pulley Ø 69 mm, belt 6pK
€242,44 €200,36 €230,30 €190,33
You save 5%
MAHLE Gear reduction starter 12V 3,2 kW, 10 teeth clockwise, oil-tight
€618,13 €510,85 €386,30 €319,26
You save 38%
GRANIT Starter motor 12 V, 2,7 kW, 10 teeth, Ø 82,5 mm, clockwise
€337,01 €278,52 €320,15 €264,59
You save 5%
GRANIT Starter motor 12 V, 3,0 kW, 10 teeth clockwise, 259 mm
€302,54 €250,03 €287,40 €237,52
You save 5%
HELLA Starter motor 12 V, 3,1 kW, 10 teeth, Ø 83 mm, clockwise
€650,46 €537,57 €522,95 €432,19
You save 20%
Track rod 868 mm, M24 x 1,5, taper 19,9 - 22,25 mm, Ø 30 mm
A: 868 mm. D: M24 x 1,5 mm. E: 19,9 mm. F: 22,25 mm. Tube Ø: 30 mm. More
A: 868 mm. D: M24 x 1,5 mm. E: 19,9 mm. F: 22,25 mm. Tube Ø: 30 mm.
€125,03 €103,33 €118,75 €98,14
You save 5%
Cover brake cylinder, medium mineral oil
Medium: Mineral oil. More
Medium: Mineral oil.
€60,20 €49,75 €57,15 €47,23
You save 5%
Brake disc Ø 306 x 7,2 mm, 12 teeth John Deere 830-2030
€157,12 €129,85 €149,25 €123,35
You save 5%
PTO shaft end piece John Deere 840-2140, 1350-2850
€392,75 €324,59 €373,10 €308,35
You save 5%
Gaiter inner-Ø upper 20 mm, lower 60 mm John Deere
Inner Ø top: 20 mm. Inner Ø bottom: 60 mm. More
Inner Ø top: 20 mm. Inner Ø bottom: 60 mm.
€5,25 €4,34
Showing 481 - 504 of 555

John Deere 1550 parts

More than 550 parts fit the John Deere 1550, enough to take care of a full service in one go, from the clutch to the headlights. Brands include GRANIT, HELLA, MAHLE, LUK and Wabco.

Clutch

For the clutch there are clutch plates with a torsion damper and single clutch pressure plates. Replace the plate and pressure plate together where you can. The tractor has to be split either way, and a new plate running against a worn pressure plate will not last. While it is apart, inspect the flywheel too: scoring or blue heat marks should be skimmed out before the new plate goes in.

Engine, cooling and electrics

  • Water pumps, plus seals for the lift pump and the coolant circuit
  • Exhaust gaskets and a lift housing gasket
  • O-rings, including one for the brake master cylinder
  • Starter motors and alternators
  • Left and right headlights

Coolant seeping from the weep hole on the water pump means the shaft seal has gone and the pump will not last much longer. Replace it as a unit and clean the gasket faces on the block thoroughly. Look over the belt and hoses at the same time, then refill with fresh coolant. Warm the engine up with the heater valve open and top up as the level drops. Headlights are available separately for left and right, so only the damaged side needs replacing.

Linkage, steering and air brakes

Lift arm bushes and washers take the play out of the rear linkage. On the steering side you can replace track rods and ball joints. Connector heads cover the air brake supply to a trailer, and gas struts hold the cab door or window where they should.

When changing a track rod, measure the old one first so the toe setting stays roughly where it was, then have the alignment checked, since wrong toe wears front tyres quickly.

Making sure it fits

First confirm on the data plate that the tractor is a 1550. Some parts are made for a group of John Deere models, such as a lift housing gasket that fits from the 820 up to the 3650 and a pressure plate for the 840 up to the 2650. The product details show this. Also compare the number on the old part, especially for the clutch, where the spline count and plate diameter have to match.

The 1550 is part of the 50 series. Two other tractors from that series have pages of their own:

For any other John Deere you look after, go to the overview of John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart