Menu
EUR

John Deere 1550 tractor parts & technical data

More than 550 parts fit the John Deere 1550. From lighting and electrics to trailer couplings, everything is gathered here so you can skip the long search.

555 parts found for John Deere 1550
Show:
GRANIT Bolt hood John Deere 940-8970
Mirror 260 x 180 mm, rod Ø 10 mm John Deere CC 2, X748
Dimensions: 260 x 180 mm. More
Dimensions: 260 x 180 mm.
€61,75 €51,03
GRANIT Bracket fender bracket right outside / left interior John Deere
GRANIT
Installation location: rechts bei Montage Kotflügelhalter außen, links bei Montage Kotflügelhalter innen. More
Installation location: rechts bei Montage Kotflügelhalter außen, lin...
€284,72 €235,31 €257,60 €212,89
You save 10%
Housing left, plastic
€46,24 €38,21 €41,80 €34,55
You save 10%
HELLA Number plate light C5W, black
HELLA
Bulb: 12V5WS / C5W. Version: Light functions: 1 - with number plate light, Test mark: K 12824/1, Colour: black. Menke no.: 54179. More
Bulb: 12V5WS / C5W. Version: Light functions: 1 - with number plate li...
€14,75 €12,19
HELLA Work lamp flood beam H3, 12 / 24 V, 55 / 70 W, angular, built-in
HELLA
Bulb: H3. Connection: AMP plug. Form: Rectangular. Hole spacing: 160 mm. Material: Housing: plastic. Dimensions W x H x D: 182 x 102 x 103 mm. Protect... More
Bulb: H3. Connection: AMP plug. Form: Rectangular. Hole spacing: 160 m...
€65,50 €54,13
GRANIT Sensor air temperature
GRANIT
Version: For air temperature. More
Version: For air temperature.
€46,11 €38,11 €43,80 €36,20
You save 5%
Cooling fan Ø 422 mm, 8 fins John Deere 940-2120
To fit as: John Deere 2020, 2030, 840, 1040, 1140, 1350, 1550, 1750, 1850, combine 1174 More
To fit as: John Deere 2020, 2030, 840, 1040, 1140, 1350, 1550, 1750, 1...
€53,07 €43,86 €48,00 €39,67
You save 10%
Wabco Trailer control valve 8 bar, M22 x 1,5, screw distance 117 x 117 mm
€814,45 €673,10 €736,85 €608,97
You save 10%
Heating element engine preheater John Deere Engine 4359, SE6110
€209,86 €173,44 €199,35 €164,75
You save 5%
Tank cap reservoir thread 34, grommet-Ø 30 mm, height 48 mm
Version: Thread 34, For expansion tank. Neck Ø: 30 mm. Height: 48 mm. More
Version: Thread 34, For expansion tank. Neck Ø: 30 mm. Height: 48 mm.
€16,65 €13,76
GRANIT Stop cable with detent A 2200 mm, B 2100 mm John Deere 840-4450
GRANIT
A: 2200 mm. B: 2100 mm. More
A: 2200 mm. B: 2100 mm.
€78,05 €64,50 €74,10 €61,24
You save 5%
Intake neck oil pump John Deere Engine 3125-4239, Series 20-2850
GRANIT Sealing ring for injection nozzle Ø 13,6 x 9,3 mm, height 5,1 mm
GRANIT
Dimensions: Height 5.1, Outer Ø 13.6, Inner Ø 9.3 mm. Menke no.: 221605. More
Dimensions: Height 5.1, Outer Ø 13.6, Inner Ø 9.3 mm. Menke no.: 221...
€2,40 €1,98
Fuel filter Ø 37 mm, height 105 mm, 1x angled, 1x straight, 8 mm
C: 30 mm. D: 37 mm. F: 8 mm. G: 8 mm. H: 105 mm. Connection: 1x angled, 1x straight, 8 mm. Connection: 1x abgewinkelt, 1x gerade, 8 mm. Outer Ø: 37 m... More
C: 30 mm. D: 37 mm. F: 8 mm. G: 8 mm. H: 105 mm. Connection: 1x angled...
€5,00 €4,13
GRANIT Flange hydraulic pump John Deere series 40-50
€54,27 €44,85 €51,55 €42,60
You save 5%
Gas strut hood 200 N, 385 mm, stroke 145 mm John Deere
Newtons: 200. A: 385 mm. B: 190 mm. C: 8 mm. D: 8 mm. Stroke: 145 mm. d1: 10 mm. d2: 22 mm. To fit: Bonnet. Form: 1. More
Newtons: 200. A: 385 mm. B: 190 mm. C: 8 mm. D: 8 mm. Stroke: 145 mm. ...
€43,98 €36,35 €41,75 €34,50
You save 5%
Lift arm shaft 494 mm, Ø 20,7 mm John Deere 830-1850
Dimensions: Length = 494, Ø = 20.7 mm. More
Dimensions: Length = 494, Ø = 20.7 mm.
€139,15 €115,00 €132,15 €109,21
You save 5%
Mirror 260 x 180 mm, unheated, rod Ø 10 mm
Dimensions: 260 x 180 mm. Rod Ø: 10 mm. More
Dimensions: 260 x 180 mm. Rod Ø: 10 mm.
€57,84 €47,80 €52,30 €43,22
You save 10%
Aircon compressor 10PA17C 12 V, pulley Ø 140 mm, 8 grooves John Deere
Menke no.: 65259 | Oil quantity (ccm): 200 | For compressor: 10PA17C | Pulley Ø (mm): 140 | Nominal voltage (V): 12 | Suitable oil: PAG 46 | Cylinder... More
Menke no.: 65259 | Oil quantity (ccm): 200 | For compressor: 10PA17C |...
€553,28 €457,26 €525,60 €434,38
You save 5%
MAHLE Airco compressor 12 V, pulley Ø 140 mm, 8 grooves, 10PA17C
MAHLE
Pulley Ø (mm): 140 | For compressor: 10PA17C | Refrigerant: R 134a | Suitable oil: PAG 46 | Additional information: With sealing ring | No. of groove... More
Pulley Ø (mm): 140 | For compressor: 10PA17C | Refrigerant: R 134a | ...
€595,13 €491,84 €371,95 €307,40
You save 38%
Showing 529 - 552 of 555

John Deere 1550 parts

More than 550 parts fit the John Deere 1550, enough to take care of a full service in one go, from the clutch to the headlights. Brands include GRANIT, HELLA, MAHLE, LUK and Wabco.

Clutch

For the clutch there are clutch plates with a torsion damper and single clutch pressure plates. Replace the plate and pressure plate together where you can. The tractor has to be split either way, and a new plate running against a worn pressure plate will not last. While it is apart, inspect the flywheel too: scoring or blue heat marks should be skimmed out before the new plate goes in.

Engine, cooling and electrics

  • Water pumps, plus seals for the lift pump and the coolant circuit
  • Exhaust gaskets and a lift housing gasket
  • O-rings, including one for the brake master cylinder
  • Starter motors and alternators
  • Left and right headlights

Coolant seeping from the weep hole on the water pump means the shaft seal has gone and the pump will not last much longer. Replace it as a unit and clean the gasket faces on the block thoroughly. Look over the belt and hoses at the same time, then refill with fresh coolant. Warm the engine up with the heater valve open and top up as the level drops. Headlights are available separately for left and right, so only the damaged side needs replacing.

Linkage, steering and air brakes

Lift arm bushes and washers take the play out of the rear linkage. On the steering side you can replace track rods and ball joints. Connector heads cover the air brake supply to a trailer, and gas struts hold the cab door or window where they should.

When changing a track rod, measure the old one first so the toe setting stays roughly where it was, then have the alignment checked, since wrong toe wears front tyres quickly.

Making sure it fits

First confirm on the data plate that the tractor is a 1550. Some parts are made for a group of John Deere models, such as a lift housing gasket that fits from the 820 up to the 3650 and a pressure plate for the 840 up to the 2650. The product details show this. Also compare the number on the old part, especially for the clutch, where the spline count and plate diameter have to match.

The 1550 is part of the 50 series. Two other tractors from that series have pages of their own:

For any other John Deere you look after, go to the overview of John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart