Menu
EUR

John Deere 8420 tractor parts & technical data

Need parts for a John Deere 8420? This 8020 series tractor is covered here with more than 200 items, among them trailer couplings, lighting and electrics.

228 parts found for John Deere 8420
Show:
GRAMMER Tractor seat Maximo Dynamic Plus air suspended, 565 mm, John Deere
GRAMMER
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board voltage (V): 12 | Seat heater: Yes | Upholstery type: Fabric / new design | Fore/af... More
Track gauge (mm): 260 | Side horizontal suspension: Yes | On-board vol...
€5.082,00 €4.200,00 €4.827,90 €3.990,00
You save 5%
GRANIT Throttle injection pump John Deere
GRAMMER Tractor seat Maximo Basic MSG85/721
GRAMMER
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 260 mm. Seat width: 480 mm. Joystick console: Optional. S... More
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: ...
€1.305,84 €1.079,21 €1.240,50 €1.025,21
You save 5%
Solenoid switch starter motor 12 V, 80 A, 3 schraubkontakt
Version: 12 V / 80 A, 3 screw connections. Additional information: Spulenwiderstand: 3.95-4.15 Temporärer Strom: 800 Amp. More
Version: 12 V / 80 A, 3 screw connections. Additional information: Spu...
€50,69 €41,89 €45,85 €37,89
You save 10%
Cobo Lens indicator/position light left / right
Cobo
To fit as: Case IH, Deutz-Fahr, Fiat, Hürlimann, John Deere, Lamborghini, Landini, Massey Ferguson, Mc Cormick, Renault, Same More
To fit as: Case IH, Deutz-Fahr, Fiat, Hürlimann, John Deere, Lamborgh...
€14,10 €11,65
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.214,60 €1.003,80 €954,30 €788,68
You save 21%
GRANIT LED work lights floodlight 3480 lm, 25 W, 12 / 24 V John Deere
GRANIT
Light colour (K): 5.700 - 6.500 | Current (A): 2,08A@12V; 1,04A@24V | Dimensions W x H x D (mm): 178 x 87 x 86 | Voltage range (V): 10 - 30 | EMC: CIS... More
Light colour (K): 5.700 - 6.500 | Current (A): 2,08A@12V; 1,04A@24V | ...
€79,62 €65,80 €75,60 €62,48
You save 5%
ROCKINGER Trailer coupling hitch pin 30,6 mm, rail 330 mm, 2000 kg, black
ROCKINGER
Rail width (mm): 330 | Guide width (mm): 32 | Drawbar eye: DIN 11026 40 mm, DIN 11043 40 mm, DIN 74054 40 mm | D-value (kN): 120,0 | Type: RO 850 D | ... More
Rail width (mm): 330 | Guide width (mm): 32 | Drawbar eye: DIN 11026 4...
€1.079,32 €892,00 €867,75 €717,15
You save 20%
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 11,45 kg
Scharmüller
Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm | Steering power (t): 2 | Co... More
Assembly notes: Anticlockwise | Description: Approved for steering for...
€612,85 €506,49
GRANIT Ball joint left 367 mm, 7/8" x 14, 1 1/4" x 12 L, taper 27,4 - 31 mm
GRANIT
A: 368 mm. C: 7/8" x 14 mm. D: 1 1/4" x 12 L mm. E: 27,4 mm. F: 31 mm. Taper: 27,4 - 31 mm. More
A: 368 mm. C: 7/8" x 14 mm. D: 1 1/4" x 12 L mm. E: 27,4 mm. F: 31 mm....
€150,39 €124,29 €142,85 €118,06
You save 5%
GRANIT Tie rod 367 mm, 7/8" x 14, 1 1/4" x 12 L, taper 27,4 - 31 mm
GRANIT
A: 368 mm. C: 7/8" x 14 mm. D: 1 1/4" x 12 L mm. E: 27,4 mm. F: 31 mm. Taper: 27,4 - 31 mm. More
A: 368 mm. C: 7/8" x 14 mm. D: 1 1/4" x 12 L mm. E: 27,4 mm. F: 31 mm....
€150,39 €124,29 €142,85 €118,06
You save 5%
Oil pump John Deere 4240-9100
€390,95 €323,10 €371,40 €306,94
You save 5%
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.675,85 €1.385,00 €1.382,55 €1.142,60
You save 18%
ROCKINGER Drawbar without sensor rail 330 mm, coupling pin 38 mm, JD green
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: JD green. Desc... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.019,62 €842,66 €780,70 €645,21
You save 23%
Walterscheid Adapter plate rail width 390 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 2800 kg. D-value: 89,3 kN. Central hole: 95 mm. Hole pattern: 160 x 100 m... More
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€1.158,06 €957,07 €909,90 €751,98
You save 21%
HELLA Number plate light R10W, 12/24 V, 102 x 55 x 57 mm - 2 pieces
HELLA
Version: For mounting above the number plate, or to the left and right of the number plate, test mark: E1 22819, plastic. Bulb: 12V10WK / R10W, 24V10W... More
Version: For mounting above the number plate, or to the left and right...
€35,80 €29,59
GRANIT Rail pressure sensor pressure control valve fuel injectors rail
GRANIT
Version: Pressure control valve - fuel (common rail). More
Version: Pressure control valve - fuel (common rail).
€379,42 €313,57 €360,40 €297,85
You save 5%
Scharmüller Drawbar frame prepared for drawbar 89,3 kN, 3000 kg, rail 330 mm
Scharmüller
Colour: AGCO grey | Guide width (mm): 32 | Rail width (mm): 330 | Category: Bearing supports | Load capacity (kg): 3000 | Version: Prepared for drawba... More
Colour: AGCO grey | Guide width (mm): 32 | Rail width (mm): 330 | Cate...
€1.690,00 €1.396,69
FEBI Thermostat Ø 54 mm, 82 °C John Deere, Sabre
FEBI
To fit as: John Deere, Sabre. Tractor types: 4520, 4620, 3030, 3130 (from 235170), 4430, 4630, 3040, 3140, 3640, 4040S, 4240, 4240S, 4440, 4640, 4840,... More
To fit as: John Deere, Sabre. Tractor types: 4520, 4620, 3030, 3130 (f...
€24,08 €19,90 €11,17 €9,23
You save 54%
Scharmüller Inserts 330/25/32 mm, JD green
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Colour: JD green. Version: Inserts. Category: Drawbar. More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Colour: ...
€566,90 €468,51
GRANIT Clamp exhaust Ø 95 - 100 mm, width 19 mm John Deere
GRANIT
Ø: 107 - 110 mm. Version: Ø 95 - 100 mm, Width 19 mm. More
Ø: 107 - 110 mm. Version: Ø 95 - 100 mm, Width 19 mm.
€75,71 €62,57 €71,90 €59,42
You save 5%
Showing 25 - 48 of 228

John Deere 8420 parts

An 8420 often works from first light until well after dark, which makes good lighting and a decent seat part of the toolkit rather than a luxury. This page brings together more than 200 John Deere 8420 parts covering lights and seating, hitching, cooling and engine wear parts. They come from GRANIT, ROCKINGER, GRAMMER, Walterscheid and HELLA.

Lights and the driver's seat

LED work lights with a wide flood beam light up the headland when you are ploughing or mowing at night. For the cab there are air suspended tractor seats, including a GRAMMER Maximo Professional.

If an air seat keeps sinking, check the air hoses and the compressor connection before replacing the bellows. A small leak at a fitting or a split hose is a common cause, and with the engine off you can usually hear it hiss.

Hitching and PTO

At the back of the tractor you can pick from ball drawbars, drawbar frames and connector heads for the trailer air brake. If you pull a trailer with forced steering, the matching ROCKINGER parts for the drawbar frame are here as well. PTO shaft ends complete this group. Replace a stub whose splines are worn or damaged in good time, otherwise it also wears the hub of every driveshaft you slide onto it.

If the alternator charges weakly, check belt tension before condemning it. A worn V-belt tensioner lets the belt slip, and even a healthy alternator then cannot keep the battery topped up.

Cooling and engine

Thermostats, gaskets, seals and sealing rings keep the engine tight and at the right temperature. Whenever you fit a new thermostat, renew the gasket or O-ring of the housing too and bleed the cooling system properly afterwards, otherwise an air pocket can make the gauge jump around. You will also find alternators, V-belt tensioners, engine sensors and a gasket for the turbocharger oil return line.

Ordering for the right 8420

Read the model and serial number from the rating plate and compare them with whatever is marked on the part you are replacing. Seals and gaskets rarely carry anything legible, so make a note of exactly where the old one sat. On alternators and other electrical parts the reference number is normally on a sticker or plate on the housing.

The 8420 belongs to the 8020 series. Its sister models each have a dedicated page: John Deere 8220, John Deere 8320 and John Deere 8520. For any other tractor from the brand, go to John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart