Menu
EUR

Deutz-Fahr 6160 Agrotron tractor parts & technical data

Planning maintenance on the Deutz-Fahr 6160 Agrotron? Here are more than 110 parts from the 6 Agrotron series, such as couplings, lighting and electrics.

116 parts found for Deutz-Fahr 6160 Agrotron
Show:
GRANIT Seal Ø 11,5 x 3 mm Fendt, SAME, Deutz-Fahr, Lamborghini
€14,20 €11,74
Pressure pipe Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
€112,68 €93,12 €107,00 €88,43
You save 5%
Sauermann Drawbar frame Piton 330/26/32, 88,1 kN, 2000/3000 kg, HS 4825-SDF-72
Sauermann
Type no.: HS 4825-SDF-72. A: 300 mm. D: 21 mm. D-value: 88,1 kN. Detent pin Ø: 26 mm. Guide width: 32 mm. H: 598 mm. Rail width: 330 mm. Load capacit... More
Type no.: HS 4825-SDF-72. A: 300 mm. D: 21 mm. D-value: 88,1 kN. Deten...
€920,21 €760,50 €874,15 €722,44
You save 5%
Sauermann Drawbar frame 330/26/32, 88,1 kN, 2000/3000 kg, HS 4850-SDF-72
Sauermann
Type no.: HS 4850-SDF-72. A: 300 mm. D: 21 mm. D-value: 88,1 kN. Detent pin Ø: 26 mm. Guide width: 32 mm. H: 705 mm. Rail width: 330 mm. Load capacit... More
Type no.: HS 4850-SDF-72. A: 300 mm. D: 21 mm. D-value: 88,1 kN. Deten...
€922,63 €762,50 €876,45 €724,34
You save 5%
MAHLE Aircon compressor 12 V, pulley Ø 132 mm, 2 grooves, 135 ccm oil, H/OR
MAHLE
Suitable oil: PAG 46 | Refrigerant: R 134a | Pulley Ø (mm): 132 | No. of grooves: 2 | Nominal voltage (V): 12 | Oil quantity (ccm): 135 | Connection:... More
Suitable oil: PAG 46 | Refrigerant: R 134a | Pulley Ø (mm): 132 | No....
€543,40 €449,09 €509,40 €420,99
You save 6%
GRANIT Radiator 693 x 545 x 141 mm Deutz-Fahr, Lamborghini, Same
GRANIT
Dimensions (mm): 693 x 545 x 141 More
Dimensions (mm): 693 x 545 x 141
€1.886,62 €1.559,19 €1.792,25 €1.481,20
You save 5%
SACHS Vibration dampers cab rear right PSE30/13X45A2
SACHS
To fit: SDF | System: Air suspension bellows and shock absorber make a complete air spring | Dimensions (mm): PSE30/13X45A2 | Installation location: R... More
To fit: SDF | System: Air suspension bellows and shock absorber make a...
€942,87 €779,23 €853,00 €704,96
You save 10%
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Lock: KS80. Menke no.: 67134. More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.682,20 €1.390,25
GRANIT Bleed valve Fendt, Deutz-Fahr
€241,85 €199,88 €229,75 €189,88
You save 5%
Sealing ring nozzle bracket Ø 16 x 7 mm, 1,5 mm thick, copper
Thickness: 1,5 mm. Outer Ø: 16 mm. Inner Ø: 7 mm. Material: Copper. More
Thickness: 1,5 mm. Outer Ø: 16 mm. Inner Ø: 7 mm. Material: Copper.
€3,51 €2,90
GRANIT Feed pump Lamborghini Mach 200 ST - 250 VRT, R6.100-R6.190
€64,52 €53,32 €61,25 €50,62
You save 5%
Seal Ø 27 x 2,5 mm Fendt, SAME, Deutz-Fahr, Lamborghini
€21,25 €17,56
Injection line SAME, Hürlimann, Deutz-Fahr, Lamborghini
€71,87 €59,40 €68,25 €56,41
You save 5%
Sauermann Drawbar 31 mm, 330 / 25 / 32 mm, 2000 kg, 97,1 kN
Sauermann
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 32 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Drawbar ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€840,76 €694,84 €760,65 €628,64
You save 10%
Sauermann Drawbar deep jaw 38 mm, 330 / 25 / 32 mm, 2000 kg, 97,1 kN
Sauermann
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Drawbar ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.003,99 €829,74 €908,35 €750,70
You save 10%
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€2.361,86 €1.951,95 €1.855,70 €1.533,64
You save 21%
Elring Seal thermostat engine cooling
DANA Spicer King pin final drive front axle 755
€109,73 €90,69 €104,20 €86,12
You save 5%
MAHLE Fuel cooler 470 x 232 x 44 mm Same, Lamborghini, Deutz-Fahr
MAHLE
Mesh length: 470 mm. Mesh width: 232 mm. Mesh depth: 44 mm. More
Mesh length: 470 mm. Mesh width: 232 mm. Mesh depth: 44 mm.
€421,93 €348,70 €263,70 €217,93
You save 38%
BOSCH Injection pump engine TCD2012L04 4V, TCD2012L06 4V, TCD4.1L4, TCD6.1L6
€461,86 €381,70 €408,46 €337,57
You save 12%
Showing 49 - 72 of 116

Deutz-Fahr 6160 Agrotron parts: injection, emissions and hitching

When the engine warning light comes on or the 6160 Agrotron suddenly feels short of pulling power, the cause is often a sensor or a leaking line rather than anything deep inside the engine. This page lists more than 110 parts for the Deutz-Fahr 6160 Agrotron, from the injection system and exhaust aftertreatment to the hitch.

Injection and exhaust

Injection lines connect pump and injector, and the O-rings and sealing rings around the injectors are here too. You will also find seals and gaskets, the water pump gasket among them, plus NOX sensors and a sensor kit for the emissions control. Makes include MAHLE and GRANIT.

A failing NOX sensor does not always throw a clear fault code. When in doubt, look first at the plug and the wiring near the exhaust, since heat and moisture attack both. Tighten a new sensor to the specified torque and use only high temperature paste on the thread. After the swap, the stored fault often has to be cleared with a diagnostic tool.

Hitch and rear lighting

  • Drawbars with a ball and top drawbars.
  • A drawbar frame and adapter plates.
  • Ball hitches, a trailer coupling and Piton Fix.
  • LED tail lights for towing after dark.

Walterscheid, Sauermann and ROCKINGER supply the hitch components.

If you tow on the road a lot, check the socket and the trailer lead after fitting a new LED tail light. A bad contact there often looks exactly like a failed lamp.

Identifying the right part

Read the type and serial number off the type plate on your 6160 Agrotron. Sensors and lines can look almost identical while differing in connector or routing, so that number is worth having to hand. NOX sensors and injection lines nearly always carry a reference number. Copy it before you remove the old part. For hitch parts, measure the rail width and pin diameter on the tractor itself.

Injection line tip: keep everything as clean as you can. Cap open ports straight away, never bend a new line to make it fit and hold the line still while you tighten the union nuts so it does not twist. Pull an injector on the 6160 and its O-rings and sealing rings go in the bin, not back on. Used ones rarely seal properly once disturbed.

Same Agrotron series

The Deutz-Fahr 6185 Agrotron has its own page with the parts listed for that tractor, and the 6165 Agrotron belongs to the same series. For older Deutz tractors or other Agrotrons on the farm, go via Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart