Menu
EUR

Deutz-Fahr Agrofarm 100 tractor parts & technical data

For your Deutz-Fahr Agrofarm 100 you can choose from more than 150 parts that fit. Trailer couplings, lighting and electrics are the best represented groups.

142 parts found for Deutz-Fahr Agrofarm 100
Show:
Mirror unheated 236 x 180 mm, rod Ø 16 - 20 mm
Mirror unheated 236 x 180 mm, rod Ø 16 - 20 mm
Tractor type: Fiat 55-66, 60-66, 65-66, 70-66, 80-66, 55-88, 60-88, 65-88, 70-88...
€26,45 €21,86
 
DANA Spicer Synchro unit, complete input shaft Ø 71 / 76 mm
DANA Spicer
Synchro unit, complete input shaft Ø 71 / 76 mm
Ø (mm): 71 / 76
€659,15 €544,75
 
Filter dryer 267 mm, Ø 76 mm, #6 3/8 o-ring, connection thread M/F
5%
Filter dryer 267 mm, Ø 76 mm, #6 3/8 o-ring, connection thread M/F
Length (mm): 267 | Material: Steel | Connection thread: M/F | Thread: #6 3/8 O-r...
€46,84 €38,71 €44,45 €36,74
 
GRANIT Thrust bearing driving clutch 55 x 91,5 x 25 mm
5%
GRANIT
Thrust bearing driving clutch 55 x 91,5 x 25 mm
Dimensions (mm): 55 x 91.5 x 25
€84,24 €69,62 €80,00 €66,12
 
GRANIT Starter ring gear Ø 393/364 mm, 129 teeth Deutz
5%
GRANIT
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
Version: Ø 393/364 mm, 129 teeth.
€79,53 €65,73 €75,55 €62,44
 
GRANIT Filter set engine oil, fuel, air, hydraulics Deutz
5%
GRANIT
Filter set engine oil, fuel, air, hydraulics Deutz
To fit type: Agrofarm 85, 100, Agrofarm 410, 420, 430. Set consisting of: Engine...
€89,76 €74,18 €85,25 €70,45
 
Optibelt V-belt engine cooling Fendt, Deutz-Fahr
Optibelt
V-belt engine cooling Fendt, Deutz-Fahr
€30,30 €25,04
 
Crankshaft seal for Ø 74 x 95 x 11 mm Fendt, Deutz-Fahr
5%
Crankshaft seal for Ø 74 x 95 x 11 mm Fendt, Deutz-Fahr
€67,87 €56,09 €64,45 €53,26
 
Thrust washer thickness 2 mm
5%
Thrust washer thickness 2 mm
Dimensions: 2 mm.
€49,09 €40,57 €46,60 €38,51
 
Gas strut rear window 200 N, 585 mm
Gas strut rear window 200 N, 585 mm
Newtons: 200. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: rear screen. For...
€32,10 €26,53
 
Seal kit Hürlimann, Deutz-Fahr
5%
Seal kit Hürlimann, Deutz-Fahr
€76,53 €63,25 €72,70 €60,08
 
Cylinder Same, Hürlimann, Deutz-Fahr, Lamborghini
5%
Cylinder Same, Hürlimann, Deutz-Fahr, Lamborghini
€319,55 €264,09 €303,55 €250,87
 
HELLA Work lamp flood beam H3 55 W, 160 x 100 x 78 mm, 12 / 24 V, upright
HELLA
Work lamp flood beam H3 55 W, 160 x 100 x 78 mm, 12 / 24 V, upright
Bulb: H3. Bulbs included: Yes. Light function: Close-range illumination. Install...
€69,15 €57,15
 
Walterscheid Adapter plate rail width 320 mm, hole pattern 140 x 80 mm, M20
18%
Walterscheid
Adapter plate rail width 320 mm, hole pattern 140 x 80 mm, M20
Rail width (mm): 320 | Guide width (mm): 38 | Colour: Black | Detent pin Ø (mm):...
€628,60 €519,50 €518,55 €428,55
 
Scharmüller Tragplatten ball 80, 91,3 kN, 2225 x 127 mm, 2 heart
Scharmüller
Tragplatten ball 80, 91,3 kN, 2225 x 127 mm, 2 heart
Thickness (mm): 75 | Description: passend für Original Zugpendelrahmen (ab Werk)...
€3.610,90 €2.984,21
 
FEBI Fuel filter Ø 77,5 mm, height 125 mm, M16 x 1,5
32%
FEBI
Fuel filter Ø 77,5 mm, height 125 mm, M16 x 1,5
€9,76 €8,07 €6,64 €5,49
 
O-ring 48 x 5 mm SAME, Deutz-Fahr, Lamborghini
O-ring 48 x 5 mm SAME, Deutz-Fahr, Lamborghini
Dimensions: 48 x 5 mm.
€4,28 €3,54
 
Showing 73 - 96 of 142

Deutz-Fahr Agrofarm 100 parts and what they cover

The Agrofarm 100 is an everyday tractor on a mixed farm, used for feeding, mowing, some haulage and the odd loader job. This page brings together more than 150 parts for it, made by GRANIT, ROCKINGER, Cobo, Walterscheid and GRAMMER.

Engine, air conditioning and starting

Spend a summer day in the cab and you notice straight away when the air conditioning is struggling. For the Agrofarm 100 there are air conditioning compressors and the V-belts that drive them. On the engine you will find valve cover gaskets, front gaskets, crankshaft seals and seal kits. If the tractor turns over slowly or only clicks, there are starter motors for this model. The hydraulics are covered with seals and the clutch with thrust bearings.

A tip on the valve cover gasket: tighten the cover bolts in a cross pattern and with a feel for it, not as hard as you can. An overtightened cover distorts, and then a new gasket leaks just like the old one. Make the faces of the head and cover clean, dry and grease-less, and check the cover is still straight by laying it on a flat surface. After a few hours of running, take another look to see that everything stays dry.

Cab, visibility and hitching

  • Gas struts, for example for the roof window
  • Work lamps, including a recessed flood beam
  • Cab mirrors
  • A GRAMMER Compacto seat with mechanical suspension
  • Automatic drawbars and a Piton Fix pin

With a mechanically suspended seat like the Compacto, take a minute after fitting to set the suspension to your own weight. Too soft and it bottoms out over every bump, too firm and you feel every rut of the field in your back. A little grease on the slide rails now and then keeps it from rattling.

Matching the part to your Agrofarm

There are several models in the Agrofarm line, so start by checking the type plate shows the 100. If a number is still visible on the old part, on the edge of a gasket or on the starter motor housing for instance, it gives you something solid to compare with the details on the product. With a starter motor, count the teeth on the pinion and note the direction of rotation too. For a V-belt, keep the old one as a reference.

If a Deutz-Fahr Agrofarm 85 works on the same farm, its parts are on a separate page, so you can see straight away what belongs to that tractor. The whole brand, from older Deutz tractors to recent models, is under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart