Menu
EUR

Deutz-Fahr Agrofarm 410 tractor parts & technical data

Need lighting, electrics or a trailer coupling for a Deutz-Fahr Agrofarm 410? This page holds more than 130 parts selected for this Agrofarm series tractor.

140 parts found for Deutz-Fahr Agrofarm 410
Show:
GRAMMER Seat Compacto COMFORT W MSG93/721, air suspended, PVC, 482 mm
5%
GRAMMER
Seat Compacto COMFORT W MSG93/721, air suspended, PVC, 482 mm
Suspension: Air suspension. Upholstery type: PVC. Seat contact switch: Optional....
€1.364,09 €1.127,35 €1.295,85 €1.070,95
 
GRANIT Clutch slave cylinder mineral oil Agrofarm, Agrolux, Agroplus
5%
GRANIT
Clutch slave cylinder mineral oil Agrofarm, Agrolux, Agroplus
€111,16 €91,87 €105,60 €87,27
 
GRANIT Mirror 236 x 180 mm unheated, rod-Ø 16 - 20 mm - 25 pieces
5%
GRANIT
Mirror 236 x 180 mm unheated, rod-Ø 16 - 20 mm - 25 pieces
Rod Ø (mm): 16 - 20 | Width (mm): 180 | Notes: Manual operation | Additional inf...
€482,81 €399,02 €458,65 €379,05
 
Elring Seal glow plug
Elring
Seal glow plug
€15,00 €12,40
 
Sleeve water pump Deutz-Fahr
Sleeve water pump Deutz-Fahr
€9,65 €7,98
 
GRANIT Pressure control valve Fendt, Deutz-Fahr
5%
GRANIT
Pressure control valve Fendt, Deutz-Fahr
€149,51 €123,56 €142,00 €117,36
 
Feed pump 2 bores, hole spacing 78 mm, pulley Ø 85 mm
5%
Feed pump 2 bores, hole spacing 78 mm, pulley Ø 85 mm
Version: 2 holes, Hole spacing 78 mm, Pulley Ø 85 mm.
€92,14 €76,15 €87,50 €72,31
 
GRANIT Connecting rod bearing Ø 63 mm
GRANIT
Connecting rod bearing Ø 63 mm
Dimensions: Ø 63 mm.
€33,25 €27,48
 
Mirror 235 x 180 mm, telescopic mirror bracket, left
10%
Mirror 235 x 180 mm, telescopic mirror bracket, left
Dimensions: 235 x 180 mm. Height: 235 mm. Width: 180 mm. Installation location: ...
€147,14 €121,60 €133,10 €110,00
 
GRANIT Spring fender left SAME, Hürlimann, Deutz-Fahr, Lamborghini
5%
GRANIT
Spring fender left SAME, Hürlimann, Deutz-Fahr, Lamborghini
€85,43 €70,60 €81,15 €67,07
 
SANDEN Aircon compressor 12 V, Ø 115 mm, 2 grooves, 100 ccm
5%
SANDEN
Aircon compressor 12 V, Ø 115 mm, 2 grooves, 100 ccm
Pulley Ø (mm): 115 | Oil quantity (ccm): 100 | Fixing: SM | Nominal voltage (V):...
€401,03 €331,43 €380,95 €314,83
 
KS Connecting rod bearing Ø 63 mm, width 29 mm Fendt, Deutz-Fahr
KS
Connecting rod bearing Ø 63 mm, width 29 mm Fendt, Deutz-Fahr
Dimensions: Ø 63 mm, Width 29 mm.
€38,35 €31,69
 
MANN-FILTER Filter set engine oil, fuel, pre-filter, air, air inner
38%
MANN-FILTER
Filter set engine oil, fuel, pre-filter, air, air inner
To fit: Deutz. To fit type: Agrofarm. Set consisting of: Engine oil filter, Main...
€174,25 €144,01 €108,90 €90,00
 
GRANIT Cylinder head bolt M12 x 108 mm Fendt, Deutz-Fahr, Lamborghini
GRANIT
Cylinder head bolt M12 x 108 mm Fendt, Deutz-Fahr, Lamborghini
Engine types: BF4M1012, BF6M1012, BF4M2012, BF6M2012, TCD2012L04 2V, TCD2012L04 ...
€20,30 €16,78
 
Cylinder head bolt M12 x 178 mm Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
Cylinder head bolt M12 x 178 mm Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
Engine types: BF4M1012, BF6M1012, BF4M2012, BF6M2012, TCD2012L04 2V, TCD2012L04 ...
€24,20 €20,00
 
GRANIT Seal kit Lamborghini, Same
5%
GRANIT
Seal kit Lamborghini, Same
€78,27 €64,69 €74,35 €61,45
 
Main bearing Ø 84 mm Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
5%
Main bearing Ø 84 mm Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
Dimensions: Ø 84 mm.
€36,08 €29,82 €34,25 €28,31
 
Showing 121 - 140 of 140

Deutz-Fahr Agrofarm 410 parts for the fuel system, engine and cab

The Agrofarm 410 is a tractor you can largely look after yourself, and most jobs on it come down to filters, seals and the odd electrical part. This page brings together more than 130 new replacement parts that fit the Deutz-Fahr Agrofarm 410, made by GRANIT, Cobo, GRAMMER, MAHLE and HELLA. They are aftermarket parts, not dealer stock, aimed at owners and mechanics who do the work in their own shed.

Fuel and engine sealing

On the fuel side there are fuel filters and a feed pump. For the engine block you will find valve cover gaskets, front gaskets, seal kits and crankshaft seals. The hydraulic pump has its own seal available separately, which often saves a pump that has started to weep.

A fuel filter tip. Do not pre-fill a new filter with diesel from an open can, because any dirt goes straight onto the clean side of the element. Fit it dry, bleed the system at the bleed screw until diesel comes out without bubbles, then let the engine idle for a few minutes before putting it to work. After the first hours, check that the filter seal stays dry.

Before laying a new valve cover gasket, scrape every trace of the old one off the head and the cover. A forgotten scrap of old gasket is enough to start a fresh oil leak along the edge.

Electrics, air conditioning and the driver seat

  • Alternators and starter motors
  • Aircon compressors with the matching V-belt
  • Work lamps from HELLA, plus separate lamp glass when only the lens has cracked
  • Gas struts for the roof hatch
  • A GRAMMER Compacto seat with mechanical suspension

If the air conditioning blows lukewarm while the compressor clutch does engage, look at the V-belt first. A glazed or squealing belt lets the compressor slip. If the compressor itself has to be replaced, have the refrigerant recovered by an air conditioning specialist, and have the system evacuated and recharged once the new unit is fitted.

The serial plate and the Agrofarm 420

The Agrofarm 410 and the Deutz-Fahr Agrofarm 420 come from the same range and are hard to tell apart at a glance. The 420 has its own page with the parts for that model, so read the serial plate before you order. For gaskets and seals, the reference number on the old part is the quickest check. On a starter motor or alternator, that number is on the plate of the unit itself. Other tractors from the brand are under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart