Menu
EUR

Deutz-Fahr Agrofarm 420 tractor parts & technical data

Lighting, trailer couplings and electrics for the Deutz-Fahr Agrofarm 420 from the Agrofarm series: more than 130 matching parts in one clear overview.

138 parts found for Deutz-Fahr Agrofarm 420
Show:
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Walterscheid
Description: This product is a ball hitch. The hitch ball 80 dimensions and areas of application comply with ISO 24347, VO (EU) 2015/208 and UN ECE R1... More
Description: This product is a ball hitch. The hitch ball 80 dimension...
€2.084,89 €1.723,05 €1.638,10 €1.353,80
You save 21%
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
Walterscheid
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ball hitches 80 according to ISO 24347. The 80 mm diameter ball can be... More
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for conn...
€2.159,85 €1.785,00 €1.697,00 €1.402,48
You save 21%
LUK Thrust bearing 55 x 90,5 x 22 mm
LUK
Dimensions (mm): 55 x 90.5 x 22 More
Dimensions (mm): 55 x 90.5 x 22
€184,17 €152,21 €174,95 €144,59
You save 5%
FEBI Thermostat Deutz Agrofarm 85, 100, Agrofarm (Tier 3) 410
FEBI
Thermostat Deutz Agrofarm 85, 100, Agrofarm (Tier 3) 410 More
Thermostat Deutz Agrofarm 85, 100, Agrofarm (Tier 3) 410
€37,35 €30,87 €25,85 €21,36
You save 31%
Ball joint 105 mm, taper 18 - 20 mm, M16 x 1,5, M24 x 1,5
A: 105 mm. C: M16 x 1,5 mm. D: M24 x 1,5 mm. E: 18 mm. F: 20 mm. Taper: 18 - 20 mm. More
A: 105 mm. C: M16 x 1,5 mm. D: M24 x 1,5 mm. E: 18 mm. F: 20 mm. Taper...
€36,00 €29,75
Scharmüller Support plates ball 80, 1142 x 240 mm, 4000 kg
Scharmüller
Lock: ball 80. Load capacity: 4000 kg. D-value: 89,3 kN. Length: 1142 mm. Width: 240 mm. Thickness: 60 mm. Number of heart pins: 2. Heart pin Ø: 32 m... More
Lock: ball 80. Load capacity: 4000 kg. D-value: 89,3 kN. Length: 1142 ...
€2.220,60 €1.835,21
GRANIT Radiator incl. box and retaining ring kit SAME, Hürlimann, Deutz-Fahr, Lamborghini
€1.241,27 €1.025,84 €1.179,20 €974,55
You save 5%
Thermostat Ø 67 mm, 87 °C, Deutz-Fahr, Fendt, Lamborghini
Ø: 67 mm. Temperature: 87 °C. More
Ø: 67 mm. Temperature: 87 °C.
€94,59 €78,17 €89,85 €74,26
You save 5%
Stop solenoid switch Deutz-Fahr
€408,62 €337,70 €388,15 €320,79
You save 5%
GRAMMER Seat Compacto COMFORT W MSG93/721, air suspended, fabric, 482 mm
GRAMMER
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 227 mm. Seat width: 482 mm. Fore/aft isolator: Yes. R... More
Suspension: Air suspension. Upholstery type: Fabric. Seat contact swit...
€1.486,67 €1.228,65 €1.412,30 €1.167,19
You save 5%
GRANIT Gas strut rear window 200 N, 445 mm, stroke 180,5 mm
GRANIT
suitable for: Heckscheibe. Newtons: 200. A: 445 mm. B: 220 mm. C: 8 mm. D: 8 mm. d1: 8 mm. d2: 18 mm. Stroke: 180,5 mm. Connection 1: Angle joint with... More
suitable for: Heckscheibe. Newtons: 200. A: 445 mm. B: 220 mm. C: 8 mm...
€44,16 €36,50 €41,95 €34,67
You save 5%
Gas strut rear window 200 N, 585 mm
Newtons: 200. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: rear screen. Form: 6. More
Newtons: 200. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: rear s...
€32,10 €26,53
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Description: Ball hitch with com... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.498,36 €1.238,31 €1.147,30 €948,18
You save 23%
MAHLE Aircon compressor 12 V, pulley Ø 150 mm, 2 grooves
MAHLE
Fixing: EM | Pulley Ø (mm): 150 | Nominal voltage (V): 12 | Suitable oil: PAG 46 | Refrigerant: R 134a | Oil quantity (ccm): 175 | No. of grooves: 2 More
Fixing: EM | Pulley Ø (mm): 150 | Nominal voltage (V): 12 | Suitable ...
€740,70 €612,15 €440,85 €364,34
You save 40%
Alternator 14 V / 95 A, flange 56 mm
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | Pulley Ø (mm): - | Form: B | Flange size (mm): 56,0 | Nominal values (V / A): 1... More
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | ...
€185,86 €153,60 €176,55 €145,91
You save 5%
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, mounting Ø 89 mm, clockwise
€571,00 €471,90 €459,00 €379,34
You save 20%
Cylinder hydraulic steering
€765,40 €632,56 €727,10 €600,91
You save 5%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Description: Manual Piton-Fix with elevator be... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.306,80 €1.080,00 €1.050,65 €868,31
You save 20%
Thermag nut exhaust manifold M8, height 8,5 mm Deutz FL712, FL812
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8.5 mm. More
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8....
€1,21 €1,00
GRANIT Gas strut roof window 150 N, 235 mm SAME, Hürlimann, Lamborghini
GRANIT
Newtons: 150. A: 235 mm. B: 110 mm. C: 8 mm. D: 8 mm. Form: 2. More
Newtons: 150. A: 235 mm. B: 110 mm. C: 8 mm. D: 8 mm. Form: 2.
€26,80 €22,15
Seal kit Hürlimann, Deutz-Fahr
€76,53 €63,25 €72,70 €60,08
You save 5%
Cobo Headlight left / right 12V60/55W / H4, built-in, screw fixing
Cobo
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal voltage: 12 V. Test mark: ECE. Light function: Dipped beam, full beam. Additional in... More
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal volt...
€87,89 €72,64 €83,45 €68,97
You save 5%
Showing 49 - 72 of 138

Deutz-Fahr Agrofarm 420 parts for everyday yard work

On many farms an Agrofarm 420 handles the jobs that come round every day: feeding, carting muck, fetching a trailer. That is exactly when you want it to start first time in the morning, with working lights and a seat you can sit in all day. This page lists more than 130 parts for this tractor, from GRANIT, ROCKINGER, Cobo, GRAMMER and HELLA.

Starting, fuel and engine

For reliable starting there are starter motors and fuel filters. On the engine itself you will find valve cover gaskets, front cover gaskets, crankshaft seals and seal kits, plus seals for the hydraulic pump. For the air conditioning there are V-belts and compressors.

A tip for the fuel filter: if possible, prime the new filter with clean diesel and then bleed the system with the hand pump until no more air bubbles come out of the bleed screw. Starting with air in the system means the starter cranks for nothing and drains the battery. Work cleanly, because any grain of dirt that drops into the line during the change goes straight to the injection pump. A leaking crankshaft seal shows up as an oily front or rear face on the engine block. Fit the new seal square, with a little oil on the lip, and ideally just off the old wear track on the shaft.

Cab, lights and drawbar

In the cab, new gas struts keep the roof window open again, and a seat from the GRAMMER Compacto line makes long days a lot more comfortable. For lighting there are flood beam work lamps and rear lights. If only the glass of a lamp is broken, check first whether a separate lamp glass is available, so the whole housing does not need replacing. At the rear there are ROCKINGER drawbars, including ball versions.

The right part for your tractor

Check the type plate to confirm that you have an Agrofarm 420 in front of you, and compare the number on the old part with the product you choose. With a starter motor, also look at the number of pinion teeth and the direction of rotation. With a drawbar, the rail width of the frame is what counts. If you also run a Deutz-Fahr Agrofarm 410, that model has its own page with the parts intended for it. All other tractors from the brand are under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart