Menu
EUR

Deutz-Fahr Agrofarm 85 tractor parts & technical data

Time to replace a light or the trailer coupling on your Deutz-Fahr Agrofarm 85? Pick from more than 140 parts for this Agrofarm tractor, including electrics.

139 parts found for Deutz-Fahr Agrofarm 85
Show:
Sleeve water pump Deutz-Fahr
Sleeve water pump Deutz-Fahr
€9,65 €7,98
 
GRANIT Pressure control valve Fendt, Deutz-Fahr
5%
GRANIT
Pressure control valve Fendt, Deutz-Fahr
€149,51 €123,56 €142,00 €117,36
 
GRANIT Piston for engine regulator Fendt, Deutz-Fahr
5%
GRANIT
Piston for engine regulator Fendt, Deutz-Fahr
Version: Installation notes: Please observe the manufacturer specifications duri...
€401,67 €331,96 €381,55 €315,33
 
Feed pump 2 bores, hole spacing 78 mm, pulley Ø 85 mm
5%
Feed pump 2 bores, hole spacing 78 mm, pulley Ø 85 mm
Version: 2 holes, Hole spacing 78 mm, Pulley Ø 85 mm.
€92,14 €76,15 €87,50 €72,31
 
GRANIT Crankshaft forged Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
5%
GRANIT
Crankshaft forged Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
Notes: Please follow the instructions in the installation guide. Please complete...
€2.071,52 €1.712,00 €1.967,90 €1.626,36
 
GRANIT Connecting rod bearing Ø 63 mm
GRANIT
Connecting rod bearing Ø 63 mm
Dimensions: Ø 63 mm.
€33,25 €27,48
 
Heating flange Hürlimann, Deutz-Fahr, Lamborghini
5%
Heating flange Hürlimann, Deutz-Fahr, Lamborghini
€385,14 €318,30 €365,85 €302,36
 
Mirror 235 x 180 mm, telescopic mirror bracket, left
10%
Mirror 235 x 180 mm, telescopic mirror bracket, left
Dimensions: 235 x 180 mm. Height: 235 mm. Width: 180 mm. Installation location: ...
€147,14 €121,60 €133,10 €110,00
 
GRANIT Seal kit Lamborghini, Same
5%
GRANIT
Seal kit Lamborghini, Same
€78,27 €64,69 €74,35 €61,45
 
GRANIT Clutch slave cylinder mineral oil Agrofarm, Agrolux, Agroplus
5%
GRANIT
Clutch slave cylinder mineral oil Agrofarm, Agrolux, Agroplus
€111,16 €91,87 €105,60 €87,27
 
GRANIT Mirror 236 x 180 mm unheated, rod-Ø 16 - 20 mm - 25 pieces
5%
GRANIT
Mirror 236 x 180 mm unheated, rod-Ø 16 - 20 mm - 25 pieces
Rod Ø (mm): 16 - 20 | Width (mm): 180 | Notes: Manual operation | Additional inf...
€482,81 €399,02 €458,65 €379,05
 
Elring Seal glow plug
Elring
Seal glow plug
€15,00 €12,40
 
KS Connecting rod bearing Ø 63 mm, width 29 mm Fendt, Deutz-Fahr
KS
Connecting rod bearing Ø 63 mm, width 29 mm Fendt, Deutz-Fahr
Dimensions: Ø 63 mm, Width 29 mm.
€38,35 €31,69
 
GRANIT Cylinder head bolt M12 x 108 mm Fendt, Deutz-Fahr, Lamborghini
GRANIT
Cylinder head bolt M12 x 108 mm Fendt, Deutz-Fahr, Lamborghini
Engine types: BF4M1012, BF6M1012, BF4M2012, BF6M2012, TCD2012L04 2V, TCD2012L04 ...
€20,30 €16,78
 
SANDEN Aircon compressor 12 V, Ø 115 mm, 2 grooves, 100 ccm
5%
SANDEN
Aircon compressor 12 V, Ø 115 mm, 2 grooves, 100 ccm
Pulley Ø (mm): 115 | Oil quantity (ccm): 100 | Fixing: SM | Nominal voltage (V):...
€401,03 €331,43 €380,95 €314,83
 
Cylinder head bolt M12 x 178 mm Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
Cylinder head bolt M12 x 178 mm Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
Engine types: BF4M1012, BF6M1012, BF4M2012, BF6M2012, TCD2012L04 2V, TCD2012L04 ...
€24,20 €20,00
 
Main bearing Ø 84 mm Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
5%
Main bearing Ø 84 mm Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
Dimensions: Ø 84 mm.
€36,08 €29,82 €34,25 €28,31
 
Showing 121 - 139 of 139

Deutz-Fahr Agrofarm 85 parts

This page holds more than 140 parts that fit the Deutz-Fahr Agrofarm 85, from GRANIT, ROCKINGER, Cobo, GRAMMER and MAHLE. They cover the engine, the air conditioning, the electrics, the hydraulics and the cab.

Parts on offer

  • Engine: valve cover gaskets, crankshaft seals, front gaskets and fuel filters
  • Air conditioning: aircon compressors and the V-belt that drives them
  • Electrics: alternators, starter motors, work lamps and lamp glass
  • Hydraulics: seal kits and hydraulic pump seals
  • Cab and hitch: roof window gas struts, seats and automatic drawbars from ROCKINGER

Bleeding after a fuel filter change

Air in the fuel system is the usual reason an engine refuses to fire after a filter change. Prime the new filter with clean diesel where the design allows it, open the bleed screw and work the hand primer until fuel comes out without bubbles. Only then turn the key. That spares the starter motor long cranking and saves the battery.

A valve cover gasket needs a clean, dry face. Tighten the cover bolts in a cross pattern and with a light hand. Overtightening bends the cover, and the new gasket ends up leaking just like the old one.

Replacing an aircon compressor also means evacuating and recharging the system with the correct amount of refrigerant and oil afterwards. That is a job for a workshop with the right equipment.

A leaking crankshaft seal shows itself as oil at the front of the block or between the engine and the clutch housing. Drive the new seal in square with a suitable drift and put a light film of oil on the lip. If the old seal has cut a groove into the shaft, set the new one slightly deeper so the lip runs on undamaged metal, as long as the design allows it.

Roof window gas struts are best replaced as a pair. Choose a seat by the bolt pattern underneath. And if a work lamp mists up on the inside, the seal around the glass has usually failed. A new lamp glass or a complete new lamp then stops the moisture from damaging the reflector.

Making sure it fits your Agrofarm 85

The Agrofarm 85 is part of the Agrofarm range from Deutz-Fahr. Read the model off the type plate. For gaskets, seals and filters, the reference number on the old part is the surest guide. With a starter motor or alternator, compare the mounting points and terminals with the unit you took off.

Its bigger sibling in the same range has its own page, useful if both tractors are on your yard: Deutz-Fahr Agrofarm 100. For other tractors from the brand, start at Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart