Menu
EUR

Tractor parts Deutz-Fahr Agroplus 70

Looking for parts for your Deutz-Fahr Agroplus 70 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

196 parts found for Deutz-Fahr Agroplus 70
Show:
MAHLE Starter motor with reduction 12 V, 3,2 kW, 11 teeth, mounting Ø 82,5 mm
€393,07 €324,85 €235,40 €194,55
You save 40%
HELLA Starter motor 12 V, 3,7 kW, 9 teeth, Ø 89 mm, clockwise
€683,49 €564,87 €526,61 €435,21
You save 23%
Spring for handle, rear window
To fit as Same. More
To fit as Same.
€24,95 €20,62
KS Piston set complete Ø 102 mm, piston pin Ø 35 mm, Deutz F4L914
KS
Dimensions: 3 rings, Ø 102 mm, gudgeon pin Ø 35 x 80 mm, combustion chamber Ø 56.5 mm, combustion chamber depth 19.59 mm, piston with coolant chann... More
Dimensions: 3 rings, Ø 102 mm, gudgeon pin Ø 35 x 80 mm, combustion ...
€680,04 €562,02 €619,10 €511,65
You save 9%
KS Connecting rod bearing Ø 60 mm, width 25 mm Fendt, Deutz-Fahr
KS
Dimensions: Ø 60 mm, Width 25 mm. More
Dimensions: Ø 60 mm, Width 25 mm.
€25,40 €20,99
VICTOR REINZ Crankshaft seal rear Fendt, Deutz-Fahr
€42,88 €35,44 €39,00 €32,23
You save 9%
VICTOR REINZ Cylinder head gasket set engine FL912, FL913, BFL913 Fendt, Deutz-Fahr
VICTOR REINZ
Engine types: FL912, FL913, BFL913. More
Engine types: FL912, FL913, BFL913.
€25,50 €21,07
Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
€14,30 €11,82
Shim 1,4 mm liner Top, Ø 120 x 102,6 mm Fendt, Deutz-Fahr
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Material: steel. Thickness: 1,4 mm. More
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Material: steel. Thickness: 1,4 ...
€14,95 €12,36
Stop cable A 1400 mm, B 1230 mm Deutz-Fahr Agroplus 60-80
A: 1400 mm. B: 1230 mm. More
A: 1400 mm. B: 1230 mm.
€253,90 €209,83
Piston set complete Ø 102 mm, combustion chamber 56 mm, cooling channel
Dimensions: 3 rings, Ø 102 mm, gudgeon pin Ø 35 x 80 mm, combustion chamber Ø 56 mm, combustion chamber depth 16.6 mm, coolant channel. More
Dimensions: 3 rings, Ø 102 mm, gudgeon pin Ø 35 x 80 mm, combustion ...
€211,64 €174,91 €192,65 €159,21
You save 9%
Thrust washer rear thickness 2,94 mm Deutz-Fahr
Engine types: FL912. Dimensions: Thickness 2.94 mm. More
Engine types: FL912. Dimensions: Thickness 2.94 mm.
€17,30 €14,30
Push rod Fendt, Deutz-Fahr
Engine types: FL912, FL913, FL812, F712. More
Engine types: FL912, FL913, FL812, F712.
€60,95 €50,37 €55,45 €45,83
You save 9%
Sealing ring push rod tube Fendt, Deutz-Fahr
Engine types: FL712, FL812. More
Engine types: FL712, FL812.
€1,65 €1,36
Feed pump Deutz-Fahr Agrolux F70, Agroplus 60-80, Fendt 200
€216,92 €179,27 €197,45 €163,18
You save 9%
Indicator/position light rectangular red P21W, R5W left
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Red, white. Form: Rectangular. Installation location: Left. Nominal voltage: 12 V. Type: Bulb. Mounting ty... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Red, white. Form: Rectangu...
€360,00 €297,52
Gear reduction starter 12 V, 4,0 kW, 9 teeth clockwise, flange 31 mm
To fit as: Deutz-Fahr, Fendt, Hürlimann, Lamborghini, Same More
To fit as: Deutz-Fahr, Fendt, Hürlimann, Lamborghini, Same
€539,42 €445,80 €491,00 €405,79
You save 9%
Stabilus Gas strut rear window 200 N, 585,5 mm, stroke 252,5 mm
Stabilus
Passend für: Case IH Heckscheibe More
Passend für: Case IH Heckscheibe
€34,30 €28,35
External plate 1,4 mm, inner 88 mm, outer 137,8 mm, 6 teeth
Version: Thickness: 1.4 mm Inner: 88 mm Outer: 137.8 mm 6 teeth More
Version: Thickness: 1.4 mm Inner: 88 mm Outer: 137.8 mm 6 teeth
€22,80 €18,84
MAHLE Aircon compressor 12 V, pulley Ø 115 mm, 2 grooves, 100 ccm oil
MAHLE
Suitable oil: PAG 46 | No. of grooves: 2 | Refrigerant: R 134a | Nominal voltage (V): 12 | Pulley Ø (mm): 115 | Additional information: with seal rin... More
Suitable oil: PAG 46 | No. of grooves: 2 | Refrigerant: R 134a | Nomin...
€500,51 €413,64 €299,75 €247,73
You save 40%
Elring Cylinder head gasket set without cylinder head gasket engine FL912, FL913, BFL913
Elring
Supplementary set: For one cylinder head | Additional information: Without cylinder head gasket More
Supplementary set: For one cylinder head | Additional information: Wit...
€33,10 €27,36
BOSCH Gear reduction starter 12 V, 3,0 kW, 9 teeth, Ø 89 mm, flange 31 mm
€512,28 €423,37 €493,35 €407,73
You save 4%
Ball joint 105 mm, taper 18 - 20 mm, M16 x 1,5, M24 x 1,5
A: 105 mm. C: M16 x 1,5 mm. D: M24 x 1,5 mm. E: 18 mm. F: 20 mm. Taper: 18 - 20 mm. More
A: 105 mm. C: M16 x 1,5 mm. D: M24 x 1,5 mm. E: 18 mm. F: 20 mm. Taper...
€36,00 €29,75
Hand brake cable SAME, Hürlimann, Deutz-Fahr, Lamborghini
€98,23 €81,18 €91,70 €75,79
You save 7%
Force sensor pin 160 mm, Ø 24 mm Deutz-Fahr
Reference no.: 0.009.2194.420. Length (mm): 160. Ø (mm): 24. More
Reference no.: 0.009.2194.420. Length (mm): 160. Ø (mm): 24.
€431,69 €356,77 €393,00 €324,79
You save 9%
Mirror 235 x 180 mm, right, rod Ø 20 mm
Dimensions (mm): 235 x 180. Height (mm): 235. Width (mm): 180. Installation location: Right. More
Dimensions (mm): 235 x 180. Height (mm): 235. Width (mm): 180. Install...
€146,23 €120,85 €133,10 €110,00
You save 9%
VICTOR REINZ Crankshaft seal for Ø 65 x 85 x 10,5 mm engine FL912, FL913 Deutz-Fahr
€37,37 €30,88 €34,00 €28,10
You save 9%
Shim 1,45 mm liner Top, Ø 120 x 102,6 mm
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,45 mm. More
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,45 mm.
€12,15 €10,04
Electric feed pump strut Ø 12 mm, thread M4 / M15 Deutz-Fahr
Version: Nozzle Ø 12 mm, Thread M4 / M15. More
Version: Nozzle Ø 12 mm, Thread M4 / M15.
€68,89 €56,93 €62,70 €51,82
You save 9%
Connecting rod bush Ø 35 mm Fendt, Deutz-Fahr
Dimensions: Ø 35 mm. More
Dimensions: Ø 35 mm.
€8,90 €7,36
Tappet engine FL912, FL913 Fendt, Deutz-Fahr
Engine types: FL912, FL913. More
Engine types: FL912, FL913.
€18,40 €15,21
Cylinder head gasket set engine FL912, FL913, BFL913 Fendt, Deutz-Fahr, Linde
Engine types: FL912, FL913, BFL913. Supplementary set: For one cylinder head. Additional information: Without cylinder head gasket. More
Engine types: FL912, FL913, BFL913. Supplementary set: For one cylinde...
€18,50 €15,29
Valve cover gewelfd Fendt, Deutz-Fahr
Engine types: FL912, FL913. More
Engine types: FL912, FL913.
€30,75 €25,41
Bosch/Rexroth Hydraulic pump 19 cm³/rpm., spline-as B 17 x 14, 9 splines, left
Bosch/Rexroth
Output volume: 19 cc/rev. Drive shaft: Splined shaft 17 x 14 9 splines. Operating pressure max.: 210 bar. Direction of rotation: Anticlockwise. Min. s... More
Output volume: 19 cc/rev. Drive shaft: Splined shaft 17 x 14 9 splines...
€697,86 €576,74 €635,30 €525,04
You save 9%
Gas strut rear window 200 N, 445 mm, stroke 180,5 mm
suitable for: Heckscheibe. Newtons: 200. A: 445 mm. B: 220 mm. C: 8 mm. D: 8 mm. d1: 8 mm. d2: 18 mm. Stroke: 180,5 mm. Connection 1: Angle joint with... More
suitable for: Heckscheibe. Newtons: 200. A: 445 mm. B: 220 mm. C: 8 mm...
€46,09 €38,09 €41,95 €34,67
You save 9%
Mirror with holder
Installation location: Right. Additional information: With holder. More
Installation location: Right. Additional information: With holder.
€76,17 €62,95 €69,35 €57,31
You save 9%
Scharmüller Drawbar automatic rail width 320 mm, coupling pin 38 mm
Scharmüller
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 89,3 kN. Colour: Black. Descript... More
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecti...
€1.256,32 €1.038,28 €1.064,75 €879,96
You save 15%
Seal kit Hürlimann, Deutz-Fahr
€79,86 €66,00 €72,70 €60,08
You save 9%
Cylinder Hürlimann, Lamborghini, Same, Deutz-Fahr
€348,02 €287,62 €316,80 €261,82
You save 9%
Cobo Rear light right 160 x 70 x 71 mm, 12 V, hole spacing 58 mm
Cobo
Bulb: 12V21WK / P21W, 12V5WK / R5W. Connection: Cable entry via grommet. Width: 160 mm. Form: Rectangular. Height: 70 mm. Hole spacing: 58 mm. Dimensi... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Connection: Cable entry via gromme...
€35,83 €29,61 €32,60 €26,94
You save 9%
Lamp glass right, left
Installation location: Right, left. More
Installation location: Right, left.
€38,80 €32,07
Cobo Glass for lamp right
Cobo
To fit as: Lamborghini, Same More
To fit as: Lamborghini, Same
€18,25 €15,08
Cobo Glass for lamp left
Cobo
To fit as: Lamborghini, Same More
To fit as: Lamborghini, Same
€18,25 €15,08
Internal plate PTO shaft 2,5 mm, 97,3 mm, 124 mm, 48 teeth
Version: Thickness: 2.5 mm Inner: 97.3 mm Outer: 124 mm 48 teeth More
Version: Thickness: 2.5 mm Inner: 97.3 mm Outer: 124 mm 48 teeth
€38,30 €31,65
Filter dryer 267 mm, #6 3/8 o-ring, connection thread M/F
Weight (g): 1200 | Connection thread: M/F | Thread: #6 3/8 O-ring | Length (mm): 267 More
Weight (g): 1200 | Connection thread: M/F | Thread: #6 3/8 O-ring | Le...
€50,58 €41,80 €46,00 €38,02
You save 9%
Filter dryer 267 mm, Ø 76 mm, #6 3/8 o-ring, connection thread M/F
Length (mm): 267 | Material: Steel | Connection thread: M/F | Thread: #6 3/8 O-ring | Outer Ø (mm): 76 | Weight (g): 900 | Dimensions (mm): - | Press... More
Length (mm): 267 | Material: Steel | Connection thread: M/F | Thread: ...
€48,88 €40,40 €44,45 €36,74
You save 9%
Showing 49 - 96 of 196

Parts for your Deutz-Fahr Agroplus 70 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr Agroplus 70. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr Agroplus 70. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr Agroplus 70. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart