Menu
EUR

Tractor parts Deutz-Fahr Agroplus 85

Looking for parts for your Deutz-Fahr Agroplus 85 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

168 parts found for Deutz-Fahr Agroplus 85
Show:
Seal kit Lamborghini, Deutz-Fahr
€64,65 €53,43 €58,85 €48,64
You save 9%
GRANIT Clutch slave cylinder mineral oil Agrofarm, Agrolux, Agroplus
€116,00 €95,87 €105,60 €87,27
You save 9%
Internal plate PTO shaft 2,5 mm, 97,3 mm, 124 mm, 48 teeth
Version: Thickness: 2.5 mm Inner: 97.3 mm Outer: 124 mm 48 teeth More
Version: Thickness: 2.5 mm Inner: 97.3 mm Outer: 124 mm 48 teeth
€38,30 €31,65
GRANIT Aircon compressor 12 V, pulley-Ø 132 mm, 2 grooves
GRANIT
Pulley Ø (mm): 132 | Nominal voltage (V): 12 | Refrigerant: R 134a | Connection: 1"" x 1"", horizontal | Fixing: EM | Suitable oil: PAG 46 | Oil quan... More
Pulley Ø (mm): 132 | Nominal voltage (V): 12 | Refrigerant: R 134a | ...
€469,07 €387,66 €427,00 €352,89
You save 9%
Filter dryer 267 mm, Ø 76 mm, #6 3/8 o-ring, connection thread M/F
Length (mm): 267 | Material: Steel | Connection thread: M/F | Thread: #6 3/8 O-ring | Outer Ø (mm): 76 | Weight (g): 900 | Dimensions (mm): - | Press... More
Length (mm): 267 | Material: Steel | Connection thread: M/F | Thread: ...
€48,88 €40,40 €44,45 €36,74
You save 9%
LUK Torsion damper Ø 263 mm, 24 teeth, tooth profile 46X50
LUK
Tooth profile: 46x50 | Number of teeth: 24 | Diameter (mm): 263 More
Tooth profile: 46x50 | Number of teeth: 24 | Diameter (mm): 263
€398,77 €329,56 €363,00 €300,00
You save 9%
MAHLE Aircon compressor 12 V, R 134a, pulley-Ø 132 mm, 2 grooves, H/TO
MAHLE
Refrigerant: R 134a | Nominal voltage (V): 12 | Oil quantity (ccm): 135 | Additional information: with seal ring | Fixing: EM | Suitable oil: PAG 100 ... More
Refrigerant: R 134a | Nominal voltage (V): 12 | Oil quantity (ccm): 13...
€571,09 €471,98 €342,00 €282,64
You save 40%
HELLA Alternator CA1433IR 14 V / 95 A without belt pulley
HELLA
Charging current (A): 95 | Nominal voltage (V): 14 | Additional information: Without pulley | Nominal values (V / A): 14 / 95 More
Charging current (A): 95 | Nominal voltage (V): 14 | Additional inform...
€503,99 €416,52 €388,30 €320,91
You save 23%
Elring Cylinder head gasket 1,5 mm, 2 bores engine BF4M1012
Elring
Thickness (mm): 1,5 More
Thickness (mm): 1,5
€69,99 €57,84 €63,70 €52,64
You save 9%
Ball joint 105 mm, taper 18 - 20 mm, M16 x 1,5, M24 x 1,5
A: 105 mm. C: M16 x 1,5 mm. D: M24 x 1,5 mm. E: 18 mm. F: 20 mm. Taper: 18 - 20 mm. More
A: 105 mm. C: M16 x 1,5 mm. D: M24 x 1,5 mm. E: 18 mm. F: 20 mm. Taper...
€36,00 €29,75
GRANIT Hand brake cable SAME, Hürlimann, Deutz-Fahr, Lamborghini
€98,23 €81,18 €91,70 €75,79
You save 7%
GRANIT Wiper motor 12 V, angle 180°
GRANIT
To fit as New Holland. More
To fit as New Holland.
€266,39 €220,16 €242,50 €200,41
You save 9%
VICTOR REINZ Exhaust manifold gasket
€6,30 €5,21
Radiator hose by-pass inner-Ø 21 / 25 mm Deutz-Fahr
Inner Ø: 21 / 25 mm. More
Inner Ø: 21 / 25 mm.
€98,20 €81,16
GRANIT Thermostat Ø 42 mm Deutz-Fahr Agroplus 75-100, Agrotron 4.70-115
€88,40 €73,06 €80,45 €66,49
You save 9%
Optibelt V-belt engine cooling Fendt, Deutz-Fahr
GRANIT Glow plug red 12 V, M12 x 1,25 Fendt, SAME, Deutz-Fahr
GRANIT
Version: 12 V, Thread M12 x 1.25. More
Version: 12 V, Thread M12 x 1.25.
€58,02 €47,95 €52,80 €43,64
You save 9%
GRANIT Tank cap thread Ø 77 / 82 mm, tank collar Ø 80 mm
GRANIT
Thread Ø mm: 77 / 82. Filler neck Ø: 80 mm. More
Thread Ø mm: 77 / 82. Filler neck Ø: 80 mm.
€33,70 €27,85
Crankshaft seal for Ø 74 x 95 x 11 mm Fendt, Deutz-Fahr
€70,82 €58,53 €64,45 €53,26
You save 9%
GRANIT Cylinder head gasket 1,4 mm, 1 bore engine BF4M1012
GRANIT
Thickness: 1,4 mm. More
Thickness: 1,4 mm.
€55,09 €45,53 €50,15 €41,45
You save 9%
Showing 97 - 120 of 168

Parts for your Deutz-Fahr Agroplus 85 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr Agroplus 85. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr Agroplus 85. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr Agroplus 85. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart