Menu
EUR

Deutz-Fahr Agroplus 95 tractor parts & technical data

Does it fit the Deutz-Fahr Agroplus 95? For the more than 170 parts on this page that question is settled, from trailer couplings to lighting and electrics.

172 parts found for Deutz-Fahr Agroplus 95
Show:
Cylinder head bolt M12 x 178 mm Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
Cylinder head bolt M12 x 178 mm Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
Engine types: BF4M1012, BF6M1012, BF4M2012, BF6M2012, TCD2012L04 2V, TCD2012L04 ...
€24,20 €20,00
 
GRANIT Stop solenoid switch 12 V Deutz-Fahr, Fendt
5%
GRANIT
Stop solenoid switch 12 V Deutz-Fahr, Fendt
€545,08 €450,48 €517,80 €427,93
 
GRANIT Injection nozzle Deutz-Fahr Agrotron 80-115, Agroplus 75-100
5%
GRANIT
Injection nozzle Deutz-Fahr Agrotron 80-115, Agroplus 75-100
Type formula: DLLA147P360, 0433171257. Bosch no.: 2580433171257.
€53,18 €43,95 €50,50 €41,74
 
GRANIT Cylinder Deutz-Fahr, Hürlimann, Lamborghini, Same
5%
GRANIT
Cylinder Deutz-Fahr, Hürlimann, Lamborghini, Same
€603,49 €498,75 €573,30 €473,80
 
Showing 169 - 172 of 172

Deutz-Fahr Agroplus 95 parts

A blown head gasket, a starter that gives up on a cold morning, a roof window that will not stay open. When one of those happens on a Deutz-Fahr Agroplus 95, this page has more than 170 new parts to choose from, made by GRANIT, ROCKINGER, Cobo, VICTOR REINZ and MAHLE.

Engine sealing

Cylinder head gaskets, valve cover gaskets, seal kits and seals, including the one for the hydraulic pump, are all here. The front cover gasket and vibration dampers complete the engine side.

Picking the right head gasket

Head gaskets for these engines come in more than one thickness, and the correct one depends on how far the pistons stand proud of the block. You can tell the thickness of the old gasket by the holes or notches at its edge. After a rebuild, measure piston protrusion again with a dial gauge. Tighten the head bolts in stages and in the correct sequence, and use new bolts where the engine calls for them.

Starting, charging and cab

  • starter motors and gear reduction starters, which use a reduction gear for more cranking torque
  • alternators
  • gas struts for the roof window
  • unheated mirrors
  • air conditioning compressors
  • automatic drawbars and Piton Fix hitches

Finding a match

Check the serial plate to be sure it is an Agroplus 95. Starters, alternators and compressors carry a plate with a number. For gaskets, take the old one and compare its shape. Then match that against the product details.

Getting the air conditioning back

If the air conditioning no longer blows cold, the compressor is not always at fault. Have the charge checked first. If the compressor does need replacing, change the drier and have the system flushed, because dirt and moisture from the old compressor will soon kill a new one. Use the correct amount of compressor oil and the right refrigerant. When fitting, check the pulley and its number of grooves, which must suit the belt drive on the engine. A vibration damper with cracked rubber makes the whole engine run rougher, and that is easiest to spot with the belts off.

For a starter that turns over reluctantly, test the battery and the earth cable before anything else. Only when those are in order is the starter motor or gear reduction starter itself the next step.

From the same Agroplus series

The Deutz-Fahr Agroplus 87 and the Deutz-Fahr Agroplus 100 each have a page with the parts for that model, which keeps things simple if you run more than one Agroplus. Any other Deutz-Fahr on the farm can be found by starting from Deutz-Fahr parts and picking the model there.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart