Menu
EUR

Tractor parts Deutz-Fahr AgroPrima 4.31

Looking for parts for your Deutz-Fahr AgroPrima 4.31 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

354 parts found for Deutz-Fahr AgroPrima 4.31
Show:
Alternator 14 V / 65 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
9%
Alternator 14 V / 65 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor
€183,88 €151,97 €167,35 €138,31
 
PROBOSS Tractor seat air suspended fabric, 480 mm, 12 V, AS2480
4%
PROBOSS
Tractor seat air suspended fabric, 480 mm, 12 V, AS2480
Air suspension with 12V compressor. Fore/aft isolator. Height adjustment, longit...
€861,12 €711,67 €825,20 €681,98
 
Cylinder head with valves Deutz-Fahr
9%
Cylinder head with valves Deutz-Fahr
Engine types: FL912, FL913. Menke no.: 70536.
€288,40 €238,35 €262,55 €216,98
 
LED headlight dipped beam / main beam / marker light, 140 x 140 x 88 mm
9%
LED headlight dipped beam / main beam / marker light, 140 x 140 x 88 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€104,21 €86,12 €94,85 €78,39
 
Clutch kit double clutch Deutz-Fahr AgroPrima, AgroXtra, DX
12%
Clutch kit double clutch Deutz-Fahr AgroPrima, AgroXtra, DX
Contents: Double clutch, clutch plate and 2x release bearing
€1.138,27 €940,72 €1.002,35 €828,39
 
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
9%
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
€299,69 €247,68 €272,80 €225,45
 
GRANIT Double hydraulic pump 19 + 11 cm³/rpm., taper 1:5 Ø 17 x 17
9%
GRANIT
Double hydraulic pump 19 + 11 cm³/rpm., taper 1:5 Ø 17 x 17
Output volume: 19 + 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17.
€348,29 €287,84 €317,00 €261,98
 
Expansion tank 2-chamber 0,25 l, H 128,5 mm Deutz-Fahr
9%
Expansion tank 2-chamber 0,25 l, H 128,5 mm Deutz-Fahr
h: 95 mm. Nominal volume: 0,25 l. Fig.: A. H: 128,5 mm.
€49,55 €40,95 €45,10 €37,27
 
Force sensor pin 60 kN, 160 mm, Ø 36,8 mm Deutz-Fahr, Lamborghini
9%
Force sensor pin 60 kN, 160 mm, Ø 36,8 mm Deutz-Fahr, Lamborghini
Length: 160 mm. Ø: 36,8 mm. Dimensions: Length = 160, Ø = 36.8 mm.
€374,78 €309,74 €341,15 €281,94
 
Clutch kit flywheel 3 mm raised Deutz, Deutz-Fahr
9%
Clutch kit flywheel 3 mm raised Deutz, Deutz-Fahr
To fit as: Deutz DX 4.10, 4.30 ,4.31, 4.50, 4.51, 4.70, 5.30, 5.50, 5.70, 6.05, ...
€1.065,75 €880,79 €970,25 €801,86
 
Stabilus Gas strut door-, for- or rear window 230 N, 502 mm, stroke 198 mm
9%
Stabilus
Gas strut door-, for- or rear window 230 N, 502 mm, stroke 198 mm
To fit as: Deutz Door, windscreen or rear screen
€47,75 €39,46 €43,45 €35,91
 
Window rubber 27,1 x 14,5 mm, clamping range 4 - 6 mm - 5 meter
9%
Window rubber 27,1 x 14,5 mm, clamping range 4 - 6 mm - 5 meter
Clamping range (mm): 4 - 6. Length (m): 5. W (mm): 27.1. H (mm): 14.5.
€58,54 €48,38 €53,25 €44,01
 
MAHLE Alternator 14 V / 80 A, flange 56 mm, pulley-Ø 68 mm
40%
MAHLE
Alternator 14 V / 80 A, flange 56 mm, pulley-Ø 68 mm
Additional information: Dust-tight with W connection | Flange size (mm): 56,0 | ...
€358,59 €296,36 €214,75 €177,48
 
BOSCH Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
4%
BOSCH
Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
€569,55 €470,70 €548,50 €453,31
 
Master brake cylinder Ø 22,2 mm, DOT 4 Deutz-Fahr DX, AgroPrima, AgroXtra
9%
Master brake cylinder Ø 22,2 mm, DOT 4 Deutz-Fahr DX, AgroPrima, AgroXtra
Hole Ø: 22.2 mm.
€410,48 €339,24 €373,70 €308,84
 
GRANIT Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
GRANIT
Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, ...
€35,00 €28,93
 
GRAMMER Seat MSG95G/721 air suspended 12 V, seat width 480 mm
GRAMMER
Seat MSG95G/721 air suspended 12 V, seat width 480 mm
Fore/aft isolator: Optional | Upholstery type: Fabric | Height (mm): 685 → 745 |...
€2.131,15 €1.761,28
 
Brake cylinder rear drum brake bore Ø 38,1 mm, DOT4 Deutz-Fahr
9%
Brake cylinder rear drum brake bore Ø 38,1 mm, DOT4 Deutz-Fahr
Medium: DOT4. Hole Ø: 38.1 mm.
€460,10 €380,25 €418,85 €346,16
 
Bosch/Rexroth Double pump anticlockwise 19 + 11 cm³/rpm. Deutz-Fahr
9%
Bosch/Rexroth
Double pump anticlockwise 19 + 11 cm³/rpm. Deutz-Fahr
OEM version: 02239230. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure max...
€990,03 €818,21 €901,30 €744,88
 
ROCKINGER Drawbar without sensor rail 310 mm, coupling pin 38 mm, black
23%
ROCKINGER
Drawbar without sensor rail 310 mm, coupling pin 38 mm, black
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 ...
€1.122,48 €927,67 €864,85 €714,75
 
ROCKINGER Drawbar inner part 310 mm, coupling pin 31,5 mm, 2000 kg
23%
ROCKINGER
Drawbar inner part 310 mm, coupling pin 31,5 mm, 2000 kg
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31,...
€1.048,62 €866,63 €807,90 €667,69
 
Walterscheid Trailer coupling hitch pin 38 mm, 65,7 kN, black Deutz-Fahr
21%
Walterscheid
Trailer coupling hitch pin 38 mm, 65,7 kN, black Deutz-Fahr
Description: This product is an automatic trailer hitch. The jaw dimensions and ...
€2.193,20 €1.812,56 €1.733,95 €1.433,02
 
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm.
€32,10 €26,53
 
Tank cap with ventilation, thread Ø 62 / 65 mm, collar Ø 65 mm
9%
Tank cap with ventilation, thread Ø 62 / 65 mm, collar Ø 65 mm
Thread Ø mm: 62 / 65. Filler neck Ø: 65 mm.
€54,42 €44,98 €49,50 €40,91
 
Showing 1 - 24 of 354

Parts for your Deutz-Fahr AgroPrima 4.31 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr AgroPrima 4.31. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr AgroPrima 4.31. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr AgroPrima 4.31. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart