Menu
EUR

Tractor parts Deutz-Fahr AgroPrima 4.51

Looking for parts for your Deutz-Fahr AgroPrima 4.51 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

370 parts found for Deutz-Fahr AgroPrima 4.51
Show:
GRANIT Gas strut door-, for- or rear window 200 N, 505 mm
GRANIT
suitable for: Tür-, Front- oder Heckscheibe. Newtons: 200. A: 505 mm. B: 365 mm. C: 13 mm. D: 13 mm. Form: 6. To fit: door screen, windscreen or rear... More
suitable for: Tür-, Front- oder Heckscheibe. Newtons: 200. A: 505 mm....
€52,07 €43,03 €47,40 €39,17
You save 9%
GRANIT Hood catch Deutz-Fahr
€86,59 €71,56 €78,80 €65,12
You save 9%
Walterscheid Piton Fix rail width 309 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.723,50 €1.424,38 €1.362,60 €1.126,12
You save 21%
Step 340 x 160 x 30 mm Deutz-Fahr Agroprima, Agrostar, Agroxtra, DX
Dimensions: 340x160x30mm mm. More
Dimensions: 340x160x30mm mm.
€94,42 €78,03 €85,95 €71,03
You save 9%
GRANIT Angle drive transmission 1:1, 1x M18 x 1,5, 1x M22 x 1,5
GRANIT
Version: VDO 33/83/1, Thread: 1 x M18 x 1.5, 1 x M22 x 1.5. More
Version: VDO 33/83/1, Thread: 1 x M18 x 1.5, 1 x M22 x 1.5.
€163,89 €135,45 €149,20 €123,31
You save 9%
Jost AUTOMOTIVE Tank cap tank collar Ø 83 mm, bayonet connection with ventilation
Jost AUTOMOTIVE
To fit as: Case IH CS 78, 86, 94, 110, 120, 130, 150 More
To fit as: Case IH CS 78, 86, 94, 110, 120, 130, 150
€81,95 €67,73 €74,60 €61,65
You save 9%
Alternator 14 V / 95 A, flange 56 mm
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | Pulley Ø (mm): - | Form: B | Flange size (mm): 56,0 | Nominal values (V / A): 1... More
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | ...
€193,94 €160,28 €176,55 €145,91
You save 9%
GRANIT Alternator 14 V, 65 A, flange 56 mm, pulley Ø 73 mm
GRANIT
Additional information: With W connection | Charging current (A): 65 | Belt width (mm) / type: 9,7 | Installation angle (°): l + r 60 | Nominal volta... More
Additional information: With W connection | Charging current (A): 65 |...
€144,18 €119,16 €131,25 €108,47
You save 9%
MANN-FILTER Filter set engine oil filter, air filter, hydraulic filter
MANN-FILTER
To fit: Deutz. To fit type: AgroPrima, AgroXtra. Set consisting of: Engine oil filter, Main fuel filter, Air filter, Secondary element, Hydraulic filt... More
To fit: Deutz. To fit type: AgroPrima, AgroXtra. Set consisting of: En...
€251,53 €207,88 €150,60 €124,46
You save 40%
GRANIT Hand throttle cable A 1660 mm, B 1575 mm Deutz-Fahr
GRANIT
A: 1660 mm. B: 1575 mm. More
A: 1660 mm. B: 1575 mm.
€39,27 €32,45 €35,70 €29,50
You save 9%
GRANIT Ball pin steel M8, wrench size 22, E 13 mm Deutz-Fahr
GRANIT
A: M8 mm. E: 13 mm. SW: 22. More
A: M8 mm. E: 13 mm. SW: 22.
€17,90 €14,79
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.820,72 €1.504,73 €1.439,45 €1.189,63
You save 21%
GRANIT End plate steering valve 210 bar, 118 x 70 x 25 mm Deutz-Fahr
GRANIT
Max. operating pressure: 210 bar Nominal flow rate: max. 70 l/min. Tightening torque: 30 Nm Dimensions: 118 x 70 x 25 mm | Description: Diese Endsekti... More
Max. operating pressure: 210 bar Nominal flow rate: max. 70 l/min. Tig...
€299,16 €247,24 €272,35 €225,08
You save 9%
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Walterscheid
Description: This product is a ball hitch. The hitch ball 80 dimensions and areas of application comply with ISO 24347, VO (EU) 2015/208 and UN ECE R1... More
Description: This product is a ball hitch. The hitch ball 80 dimension...
€2.071,98 €1.712,38 €1.638,10 €1.353,80
You save 21%
Bosch/Rexroth Hydraulic pump 11 cm³/rpm., claw 17,8 x 8, left Deutz-Fahr
Bosch/Rexroth
Direction of rotation: Anticlockwise | Output volume (cc/rev): 11 | Drive shaft: Claw, Ø 17.8 x 8 | Bosch no.: 1517222715 More
Direction of rotation: Anticlockwise | Output volume (cc/rev): 11 | Dr...
€469,70 €388,18 €427,60 €353,39
You save 9%
Filter dryer airco 229 mm, Ø 76 mm, #6 3/8 o-ring Deutz-Fahr, Fendt
Material: Steel | Thread: #6 3/8 O-ring | Weight (g): 783 | Connection thread E: 3/8"" | Connection thread A: 3/8"" | Connection thread: 10 | Outer Ø... More
Material: Steel | Thread: #6 3/8 O-ring | Weight (g): 783 | Connection...
€60,62 €50,10 €55,15 €45,58
You save 9%
LUK Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
LUK
Dimensions (mm): 20 x 52 x 15 More
Dimensions (mm): 20 x 52 x 15
€35,51 €29,35 €32,30 €26,69
You save 9%
FEBI Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
You save 57%
MAHLE Starter motor with reduction 12 V, 3,0 kW, 9 teeth, Ø 89 mm, angle l 52
€699,35 €577,98 €418,85 €346,16
You save 40%
MAHLE Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
€662,73 €547,71 €396,90 €328,02
You save 40%
Wabco Compressor 11,5 bar, 159 cm³, Ø 75 mm, stroke 36 mm
Wabco
Operating pressure max.: 11.5 bar. Cylinder capacity: 159 cm³. Speed: 3000 1/min.. Piston Ø: 75 mm. Piston stroke: 36 mm. Cooling system: Air. Threa... More
Operating pressure max.: 11.5 bar. Cylinder capacity: 159 cm³. Speed:...
€1.893,95 €1.565,25 €1.724,25 €1.425,00
You save 9%
Brake shoe Hand brake 180 x 40 mm Deutz
€52,18 €43,12 €47,50 €39,26
You save 9%
Master brake cylinder piston Ø 19,05 mm, DOT 4 Deutz-Fahr
€483,27 €399,40 €439,95 €363,60
You save 9%
Showing 49 - 72 of 370

Parts for your Deutz-Fahr AgroPrima 4.51 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr AgroPrima 4.51. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr AgroPrima 4.51. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr AgroPrima 4.51. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart