Menu
EUR

Deutz-Fahr AgroPrima 6.16 tractor parts & technical data

Keeping a Deutz-Fahr AgroPrima 6.16 in good order is simpler with more than 300 parts on one page, from trailer couplings and lighting to electrics.

290 parts found for Deutz-Fahr AgroPrima 6.16
Show:
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm.
€32,10 €26,53
 
GRANIT Oil drain valve M18 x 1,5
5%
GRANIT
Oil drain valve M18 x 1,5
Thread: M18 x 1.5.
€65,32 €53,98 €62,00 €51,24
 
Tank cap bayonet connection with ventilation, tank collar Ø 83 mm
5%
Tank cap bayonet connection with ventilation, tank collar Ø 83 mm
Filler neck Ø: 83 mm.
€78,53 €64,90 €74,60 €61,65
 
Double hydraulic pump 22,5 + 16 cm³/rpm., 9 teeth, B 17 x 14
5%
Double hydraulic pump 22,5 + 16 cm³/rpm., 9 teeth, B 17 x 14
Output volume: 22,5 + 16 cc/rev. Drive shaft: Splined shaft 9 splines, 17 x 14. ...
€474,14 €391,85 €450,40 €372,23
 
Windshield frame shock absorber or rear window 230 N, 505 mm Deutz-Fahr
10%
Windshield frame shock absorber or rear window 230 N, 505 mm Deutz-Fahr
suitable for: Frontscheibe oder Heckscheibe. Newtons: 230. A: 505 mm. B: 255 mm....
€49,47 €40,88 €44,75 €36,98
 
HELLA Headlight left / right 12 V, R2, Ø 180 mm, built-in
HELLA
Headlight left / right 12 V, R2, Ø 180 mm, built-in
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2 (Bilux). Outer Ø: 180 mm. Form...
€114,00 €94,21
 
Reflector
Reflector
To fit as: Case IH C 42, 48, 55, 64, 70, CS 48, 52, 58, 63, 68, 75, Deutz-Fahr A...
€6,40 €5,29
 
HELLA Relays relays make contact 12 V, 40 A, 5-pin, 6,3 mm
HELLA
Relays relays make contact 12 V, 40 A, 5-pin, 6,3 mm
Version: 12 V / 40 A, With bracket, 5-pin, blade terminal 6.3 mm.
€19,45 €16,07
 
HELLA Glass rear light right, 4 light functions, with red spare lens
HELLA
Glass rear light right, 4 light functions, with red spare lens
To fit as: Deutz-Fahr DX 3 V/F/S 3.10, 3.30, 3.50, 3.70, 3.90, DX 4.10, 4.30, 4....
€18,00 €14,88
 
Stabilus Gas strut door-, for- or rear window 230 N, 502 mm, stroke 198 mm
10%
Stabilus
Gas strut door-, for- or rear window 230 N, 502 mm, stroke 198 mm
To fit as: Deutz Door, windscreen or rear screen
€48,05 €39,71 €43,45 €35,91
 
GRAMMER Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VI
GRAMMER
Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VI
Joystick console: Yes | Seat width (mm): 530 | Height (mm): 754 | Restraint syst...
€2.243,85 €1.854,42
 
Repair set brake cylinder DOT4 Deutz-Fahr
5%
Repair set brake cylinder DOT4 Deutz-Fahr
Medium: DOT4. Additional information: Without piston.
€58,58 €48,41 €55,65 €45,99
 
VICTOR REINZ Valve cover gasket Deutz engine FL912, FL913, BFL913
VICTOR REINZ
Valve cover gasket Deutz engine FL912, FL913, BFL913
€9,55 €7,89
 
Air hose air intake pipe inner-Ø 70 mm, length 50 mm Deutz-Fahr
Air hose air intake pipe inner-Ø 70 mm, length 50 mm Deutz-Fahr
Inner Ø: 70 mm. Outer Ø: 80 mm. Length: 50 mm.
€36,00 €29,75
 
GRANIT Push rod Fendt, Deutz-Fahr
5%
GRANIT
Push rod Fendt, Deutz-Fahr
Engine types: FL912, FL913, FL812, F712.
€58,41 €48,27 €55,45 €45,83
 
Tank cap with ventilation, thread Ø 62 / 65 mm, collar Ø 65 mm
5%
Tank cap with ventilation, thread Ø 62 / 65 mm, collar Ø 65 mm
Thread Ø mm: 62 / 65. Filler neck Ø: 65 mm.
€52,15 €43,10 €49,50 €40,91
 
GRANIT Manifold gasket exhaust Fendt, Deutz-Fahr
GRANIT
Manifold gasket exhaust Fendt, Deutz-Fahr
Engine types: FL712, FL812.
€4,69 €3,88
 
Shim liner Top 1,1 mm, Ø 120 x 102,6 mm Fendt, Deutz-Fahr
Shim liner Top 1,1 mm, Ø 120 x 102,6 mm Fendt, Deutz-Fahr
Outer Ø: 120 mm. Form: A form. Inner Ø: 102,6 mm. Material: steel. Thickness: 1,...
€4,55 €3,76
 
GRANIT Crankshaft seal rear engine Deutz FL913, BFL913
5%
GRANIT
Crankshaft seal rear engine Deutz FL913, BFL913
€38,32 €31,67 €36,40 €30,08
 
GRANIT Valve seat ring outlet valve Fendt, Deutz-Fahr
GRANIT
Valve seat ring outlet valve Fendt, Deutz-Fahr
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€27,20 €22,48
 
O-ring feed pump Ø 38 x 3 mm Deutz engine 912, 913W/T
O-ring feed pump Ø 38 x 3 mm Deutz engine 912, 913W/T
Version: Ø 38 x 3 mm.
€7,65 €6,32
 
PROBOSS Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
PROBOSS
Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
To fit: Deutz V2. Suspension: Air suspension. Upholstery type: Fabric. Seat cont...
€1.825,85 €1.508,97
 
Gasket lift housing 240 x 300 mm Deutz-Fahr
5%
Gasket lift housing 240 x 300 mm Deutz-Fahr
Dimensions: 240 x 300 mm.
€64,61 €53,40 €61,35 €50,70
 
Showing 49 - 72 of 290

Deutz-Fahr AgroPrima 6.16 parts

Many AgroPrima 6.16 tractors have years of field work behind them, and sooner or later the clutch, the seals and the cab need attention. This page lists more than 300 replacement parts for this model, supplied by GRANIT, HELLA, ROCKINGER, LUK, MAHLE and others.

Refitting cab glass

If a window has cracked, there is a repair set with polyurethane bonding sealant and primer. Remove all of the old adhesive from the frame, degrease the surface and apply the primer before the sealant goes on. Then give it enough time to cure before heading out, or vibration will loosen the glass again.

Gas struts for the door and windows, push button switches for the work lamps and a tractor seat round off the cab items.

Clutch, engine, hitching and fit

Complete clutch kits and thrust bearings are available. Whenever the clutch is out, fit a new release bearing at the same time. Shims help to restore the correct clearance when setting things up again, and there is a fixed brake caliper too.

For the brake caliper, use the brake fluid specified on the part and bleed the system thoroughly after fitting.

For the engine there is a crankshaft seal, exhaust gaskets and alternators. On the linkage, the lift shaft seal is a common spot for oil to weep after years of use, and the left hand seal is listed here.

If the battery is not charging well, measure the voltage at the terminals with the engine running and check the belt and earth cable before replacing the alternator.

Drawbars, a drawbar frame and a trailer coupling are available for towing work.

Once coupled, the pin of the trailer coupling must lock fully. Check that the safety catch is really closed before you drive off, and replace a worn pin in good time. Door gas struts are best replaced together and fitted with the rod pointing down.

Use the identification plate to confirm you have an AgroPrima 6.16. Seals and bearings usually show their size or a reference number on the old part, so compare that with the product page. For a drawbar, measure the rail width, and for an alternator check the flange and pulley. Lay the old part next to the product details while comparing, so small differences stand out.

AgroPrima 6.06

The Deutz-Fahr AgroPrima 6.06 from the same series has its own page with the parts for that model. Every other tractor from the brand is under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart