Menu
EUR

Deutz-Fahr AgroPrima 6.16 tractor parts & technical data

Keeping a Deutz-Fahr AgroPrima 6.16 in good order is simpler with more than 300 parts on one page, from trailer couplings and lighting to electrics.

290 parts found for Deutz-Fahr AgroPrima 6.16
Show:
Gas strut roof window or windshield 200 N, 255 mm, stroke 91 mm Deutz-Fahr
5%
Gas strut roof window or windshield 200 N, 255 mm, stroke 91 mm Deutz-Fahr
suitable for: Dachluke oder Frontscheibe. Newtons: 200. A: 255 mm. B: 125 mm. C:...
€53,45 €44,17 €50,75 €41,94
 
Replacement key lock number 1012
Replacement key lock number 1012
Locking number: 1012.
€37,10 €30,66
 
PROBOSS Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
PROBOSS
Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
To fit: Deutz V1. On-board voltage: 12 V. Upholstery type: Fabric. Seat contact ...
€1.903,30 €1.572,98
 
Sealing ring piston 84 x 88 x 1,5 mm Deutz-Fahr
Sealing ring piston 84 x 88 x 1,5 mm Deutz-Fahr
Dimensions: 84 x 88 x 1.5 mm.
€33,20 €27,44
 
Wiper motor without switch 12 V, angle 105°, M12 x 1
5%
Wiper motor without switch 12 V, angle 105°, M12 x 1
Volts: 12. W: konisch 8 x M6 mm. Angle: 105 °. A: 65 mm. B: 43 mm. C: 9 mm. D: M...
€201,78 €166,76 €191,65 €158,39
 
GRANIT Pin 25 x 105 mm Deutz-Fahr
10%
GRANIT
Pin 25 x 105 mm Deutz-Fahr
Dimensions: 25 x 105 mm.
€75,34 €62,26 €68,15 €56,32
 
GRANIT Hood catch Deutz-Fahr
5%
GRANIT
Hood catch Deutz-Fahr
€82,98 €68,58 €78,80 €65,12
 
GRANIT Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
GRANIT
Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade...
€26,20 €21,65
 
HELLA Reflector round orange Ø 60 mm, bore Ø 6,0 mm, screwed
HELLA
Reflector round orange Ø 60 mm, bore Ø 6,0 mm, screwed
Colour: Yellow. Hole Ø: 6.0 mm. Form: Round. Total Ø: 60 mm. Material: Plastic. ...
€1,96 €1,62
 
GRANIT Headlight left / right 12 / 24 V, H4, glass Ø 136 mm, built-in
10%
GRANIT
Headlight left / right 12 / 24 V, H4, glass Ø 136 mm, built-in
Bulb: 12V60/55W / H4, 24V75/70W / H4. Installation location: Left, right. Nomina...
€153,10 €126,53 €138,50 €114,46
 
Relays relays changeover contact 12 V / 30 A, 5-pin, with holder
Relays relays changeover contact 12 V / 30 A, 5-pin, with holder
Version: 12 V / 30 A With bracket, 5-pin, blade terminal 6.3 mm.
€12,45 €10,29
 
GRANIT Push button switch work lamp 12 / 24 V, button yellow, 4 blade terminals
5%
GRANIT
Push button switch work lamp 12 / 24 V, button yellow, 4 blade terminals
To fit as: Deutz-Fahr AgroCompact 3.30 V/F, 3.50, 3.50 S, 3.50 V/F, 3.70 V/F, 3....
€33,20 €27,44 €31,50 €26,03
 
Stabilus Gas strut door 300 N, 505 mm, ball socket 8 mm Deutz-Fahr
5%
Stabilus
Gas strut door 300 N, 505 mm, ball socket 8 mm Deutz-Fahr
To fit as: Deutz door
€78,89 €65,20 €74,90 €61,90
 
LUK Double clutch 310/310TGU 41 x 45 mm, 21 splines sintered Deutz-Fahr
10%
LUK
Double clutch 310/310TGU 41 x 45 mm, 21 splines sintered Deutz-Fahr
Material specifications: Sintered clutch lining | Dimensions (mm): 41 x 45, 21 g...
€1.201,52 €992,99 €1.087,00 €898,35
 
Scharmüller Drawbar frame 74 kN, 3000 kg, rail 330 mm, pin Ø 25 mm, draw pendulum
Scharmüller
Drawbar frame 74 kN, 3000 kg, rail 330 mm, pin Ø 25 mm, draw pendulum
D-value (kN): 74 | Version: Prepared for drawbar | Rail width (mm): 330 | Detent...
€1.241,26 €1.025,83
 
Scharmüller Drawbar frame 43,2 kN, rail 330 mm, guide 32 mm, pin Ø 25 mm
Scharmüller
Drawbar frame 43,2 kN, rail 330 mm, guide 32 mm, pin Ø 25 mm
Detent pin Ø (mm): 25 | Category: Bearing supports | Load capacity (kg): 2000 | ...
€1.034,55 €855,00
 
Scharmüller Clutch complete type 1120 coupling pin 38 mm, nose weight 1250 kg
16%
Scharmüller
Clutch complete type 1120 coupling pin 38 mm, nose weight 1250 kg
Hole (mm): M20 | Overhang (mm): 211 | Thread: M20 | Lock: Automatic | Internal w...
€1.379,76 €1.140,30 €1.162,15 €960,45
 
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, fan
38%
MAHLE
Alternator 14 V / 120 A, flange 56 mm, form B, fan
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | Installation...
€448,64 €370,78 €280,40 €231,74
 
Clutch cable driving clutch 1285 mm, sleeve 955 mm, M8, M12 Deutz-Fahr
5%
Clutch cable driving clutch 1285 mm, sleeve 955 mm, M8, M12 Deutz-Fahr
Sleeve length (mm): 955 | Cable length (mm): 1285 | Thread: M08, M12
€87,68 €72,46 €83,25 €68,80
 
LUK Thrust bearing driving clutch 65 x 96 x 23 mm
5%
LUK
Thrust bearing driving clutch 65 x 96 x 23 mm
Dimensions (mm): 65 x 96 x 23
€155,61 €128,60 €147,80 €122,15
 
GRANIT Double clutch DuT 310 41 x 45 mm, 21 splines Deutz-Fahr
5%
GRANIT
Double clutch DuT 310 41 x 45 mm, 21 splines Deutz-Fahr
Contents: 445K88052034AT | Flywheel dimension (mm): 3 (erhöht) | web (mm): 79 | ...
€822,20 €679,50 €781,00 €645,45
 
GRANIT Alternator 14 V, 65 A, flange 56 mm, pulley Ø 73 mm
5%
GRANIT
Alternator 14 V, 65 A, flange 56 mm, pulley Ø 73 mm
Additional information: With W connection | Charging current (A): 65 | Belt widt...
€138,17 €114,19 €131,25 €108,47
 
Universal joint 30,2 x 82 mm, bush lubrication
5%
Universal joint 30,2 x 82 mm, bush lubrication
A: 30,2 mm. B: 82 mm. Universal joint size: . Lubrication system: Bush lubricati...
€164,61 €136,04 €156,35 €129,21
 
LUK Pilot bearing 20 x 52 x 15 mm
5%
LUK
Pilot bearing 20 x 52 x 15 mm
Dimensions: 20 x 52 x 15 mm.
€34,18 €28,25 €32,45 €26,82
 
Showing 121 - 144 of 290

Deutz-Fahr AgroPrima 6.16 parts

Many AgroPrima 6.16 tractors have years of field work behind them, and sooner or later the clutch, the seals and the cab need attention. This page lists more than 300 replacement parts for this model, supplied by GRANIT, HELLA, ROCKINGER, LUK, MAHLE and others.

Refitting cab glass

If a window has cracked, there is a repair set with polyurethane bonding sealant and primer. Remove all of the old adhesive from the frame, degrease the surface and apply the primer before the sealant goes on. Then give it enough time to cure before heading out, or vibration will loosen the glass again.

Gas struts for the door and windows, push button switches for the work lamps and a tractor seat round off the cab items.

Clutch, engine, hitching and fit

Complete clutch kits and thrust bearings are available. Whenever the clutch is out, fit a new release bearing at the same time. Shims help to restore the correct clearance when setting things up again, and there is a fixed brake caliper too.

For the brake caliper, use the brake fluid specified on the part and bleed the system thoroughly after fitting.

For the engine there is a crankshaft seal, exhaust gaskets and alternators. On the linkage, the lift shaft seal is a common spot for oil to weep after years of use, and the left hand seal is listed here.

If the battery is not charging well, measure the voltage at the terminals with the engine running and check the belt and earth cable before replacing the alternator.

Drawbars, a drawbar frame and a trailer coupling are available for towing work.

Once coupled, the pin of the trailer coupling must lock fully. Check that the safety catch is really closed before you drive off, and replace a worn pin in good time. Door gas struts are best replaced together and fitted with the rod pointing down.

Use the identification plate to confirm you have an AgroPrima 6.16. Seals and bearings usually show their size or a reference number on the old part, so compare that with the product page. For a drawbar, measure the rail width, and for an alternator check the flange and pulley. Lay the old part next to the product details while comparing, so small differences stand out.

AgroPrima 6.06

The Deutz-Fahr AgroPrima 6.06 from the same series has its own page with the parts for that model. Every other tractor from the brand is under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart