Menu
EUR

Deutz-Fahr Agrotron 100 tractor parts & technical data

Lighting, trailer couplings and electrics are part of the more than 250 items that fit the Deutz-Fahr Agrotron 100, alongside many other parts on this page.

273 parts found for Deutz-Fahr Agrotron 100
Show:
Elring Valve cover gasket inlet manifold Deutz engine BF6M1013
€49,38 €40,81 €46,90 €38,76
You save 5%
FEBI Fuel filter Ø 77,5 mm, height 125 mm, M16 x 1,5
€9,76 €8,07 €6,64 €5,49
You save 32%
FEBI Cab filter for C55102 and AF26108
€40,38 €33,37 €11,43 €9,45
You save 72%
Ball joint 340 mm, M22 x 1,5, M24 x 1,5, taper 24,6 - 28,5 mm
A: 340 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. Taper: 24,6 - 28,5 mm. More
A: 340 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. T...
€187,15 €154,67 €177,75 €146,90
You save 5%
Gaiter for brake linkage foot brake
€65,94 €54,50 €62,60 €51,74
You save 5%
Shim foot brake 3 mm thick Deutz Agrotron 6120.4-6160.4
€60,44 €49,95 €57,40 €47,44
You save 5%
GRANIT Brake disc Ø 241 mm, thickness 4,85 mm, 28 teeth, version Sirmac
€65,62 €54,23 €62,30 €51,49
You save 5%
External plate AV35 powershift 2,2 mm, inner 77,3 mm, 30 teeth
Version: Thickness: 2.2 mm, Inner: 77.3 mm, Outer: 118.3 mm, 30 teeth. More
Version: Thickness: 2.2 mm, Inner: 77.3 mm, Outer: 118.3 mm, 30 teeth.
€34,50 €28,51 €32,75 €27,07
You save 5%
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Lock: KS80. Menke no.: 67134. More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.682,20 €1.390,25
VICTOR REINZ Cylinder head gasket 1 bore engine BF4L1012 Deutz-Fahr, Fendt
€72,12 €59,60 €68,50 €56,61
You save 5%
O-ring 48 x 5 mm SAME, Deutz-Fahr, Lamborghini
Dimensions: 48 x 5 mm. More
Dimensions: 48 x 5 mm.
€4,28 €3,54
GRANIT Glow plug red 12 V, M12 x 1,25 Fendt, SAME, Deutz-Fahr
GRANIT
Version: 12 V, Thread M12 x 1.25. More
Version: 12 V, Thread M12 x 1.25.
€55,60 €45,95 €52,80 €43,64
You save 5%
Thrust washer set standard Deutz-Fahr
Engine types: BF4M1013, BF4M1013C, BF4M1013E, BF4M1013, BF6M1013C/CP/E/EC. More
Engine types: BF4M1013, BF4M1013C, BF4M1013E, BF4M1013, BF6M1013C/CP/E...
€36,72 €30,35 €34,85 €28,80
You save 5%
GRANIT Inlet valve engine Deutz-Fahr Agroplus 75-100, Agrotron 4.70-115
€37,80 €31,24 €35,90 €29,67
You save 5%
GRANIT Air receiver gasket
€12,40 €10,25
Feed pump 2 hole, hole spacing horizontal 78 mm, pulley Ø 102 mm
Version: 2 holes, Horizontal hole spacing: 78 mm, Centrifugal pump, pulley Ø 102 mm. To fit: Deutz, Lamborghini, Same. More
Version: 2 holes, Horizontal hole spacing: 78 mm, Centrifugal pump, pu...
€94,04 €77,72 €89,30 €73,80
You save 5%
Showing 145 - 168 of 273

Deutz-Fahr Agrotron 100 parts for gaskets, belts and the cab

Oil weeping from the valve cover, coolant slowly disappearing or bubbles in the expansion tank: on an Agrotron 100 with a few hours on the clock, trouble often starts at a gasket. This page lists more than 250 new Deutz-Fahr Agrotron 100 parts, with VICTOR REINZ and Elring for the gaskets, alongside GRANIT, HELLA and ROCKINGER.

Head gasket thickness matters

For the engine there are cylinder head gaskets, valve cover gaskets, air receiver gaskets and crankshaft seals, plus seals for the hydraulic pump. Head gaskets come in different thicknesses, and the one you need depends on how far the pistons stand proud of the block. Copy the marking on the old gasket, and measure piston protrusion again if the block or pistons have been machined or replaced. A gasket that is too thin can let the pistons touch the valves.

Belts, starter and lighting

There are V-belts and starter motors for the engine. A belt that squeals on start-up or shows glazed flanks is due for replacement, and a new one should be re-tensioned after the first hours of work. Lighting is covered with work lamps and toggle switches for the driving lights.

If the starter turns slowly, measure battery voltage first and check the earth cable and terminals. A poor connection looks exactly like a worn starter from the outside. When fitting a new valve cover gasket, tighten the bolts evenly and not too hard, or the gasket squeezes out and starts leaking again.

Cab, steering and hitch

Gas struts hold the roof window and rear window open. When a window no longer stays up, replace both struts together so they push evenly. You will also find ball joints, wide-angle mirrors, automatic drawbars and Piton Fix hitches. A worn ball joint shows up as play in the steering wheel and a tractor that wanders on the road.

Getting the right part

The type plate tells you which Agrotron you have, which matters because many Agrotron models look very similar from the outside. With gaskets, compare the shape and bolt holes with the old one, and look for a reference number on the old part.

Other Agrotron models have separate pages with the parts that fit them:

All Deutz-Fahr tractors are listed under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart