Menu
EUR

Deutz-Fahr Agrotron 110 tractor parts & technical data

Looking for a lamp, a trailer coupling or an electrics part for the Deutz-Fahr Agrotron 110? This Agrotron series model has more than 200 parts listed here.

243 parts found for Deutz-Fahr Agrotron 110
Show:
BOSCH Gear reduction starter 12 V, 3,0 kW, 9 teeth, Ø 89 mm, flange 31 mm
€512,28 €423,37 €493,38 €407,75
You save 4%
Force sensor pin 60 kN, 160 mm, Ø 36,8 mm Deutz-Fahr, Lamborghini
Length: 160 mm. Ø: 36,8 mm. Dimensions: Length = 160, Ø = 36.8 mm. More
Length: 160 mm. Ø: 36,8 mm. Dimensions: Length = 160, Ø = 36.8 mm.
€374,78 €309,74 €344,80 €284,96
You save 8%
Lifting strut complete 710 - 800 mm, M36 x 3 Steyr, Deutz-Fahr
Dimensions: Length = 710 - 800, Ball joint Ø = 25.4, Clevis Ø = 28, Clevis width = 31, Thread = M36 x 3 mm. Reference no.: 1-32-574-020. Menke no.: ... More
Dimensions: Length = 710 - 800, Ball joint Ø = 25.4, Clevis Ø = 28, ...
€313,06 €258,73 €288,02 €238,03
You save 8%
Sauermann Drawbar ball 80, rail width 320 mm, guide 19 mm, 3000 kg
Sauermann
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load capacity: 3000 kg. Colour: Black. D-value: 92 kN. Version: Pivot bolt. Lock: ball... More
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load c...
€1.594,08 €1.317,42 €1.516,55 €1.253,35
You save 5%
SACHS Single clutch Deutz-Fahr Agrotron 4.70 - 6.20, 80 - 115
€498,22 €411,75 €458,36 €378,81
You save 8%
AKS-Dasis Condenser 310 x 580 x 22 mm Deutz-Fahr Agrotron
AKS-Dasis
Equipment: Soldered cooling fins | Length (mm): 310 | Width (mm): 580 | Height (mm): 22 | Weight (g): 3.000 More
Equipment: Soldered cooling fins | Length (mm): 310 | Width (mm): 580 ...
€802,20 €662,98 €738,02 €609,94
You save 8%
Filter dryers airco 162 mm, #6 3/8 o-ring, M Deutz-Fahr
Length (mm): 162 | Thread: #6 3/8 O-Ring | Weight (g): 900 | Connection thread: M More
Length (mm): 162 | Thread: #6 3/8 O-Ring | Weight (g): 900 | Connectio...
€66,06 €54,60 €60,78 €50,23
You save 8%
LUK Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
LUK
Dimensions (mm): 20 x 52 x 15 More
Dimensions (mm): 20 x 52 x 15
€35,51 €29,35 €32,67 €27,00
You save 8%
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
Version: Ø 393/364 mm, 129 teeth. More
Version: Ø 393/364 mm, 129 teeth.
€82,99 €68,59 €76,35 €63,10
You save 8%
ROCKINGER Piton Fix hole pattern 160 x 100 mm, bore M21, 3000 kg, 98,1 kN
ROCKINGER
Lock: Piton Fix. Hole pattern: 160 x 100 mm. Load capacity: 3000 kg. D-value: 98,1 kN. Hole: M21 mm. No. of holes: 4. Colour: Black. More
Lock: Piton Fix. Hole pattern: 160 x 100 mm. Load capacity: 3000 kg. D...
€1.126,27 €930,80 €867,77 €717,17
You save 23%
Radiator copper with frame Deutz-Fahr Agrotron 80-150, 4.70-6.45
To fit as: Deutz-Fahr Series Agrotron: 80–120, 135, 150; Series Agrotron 4.xx: 4.70–4.95; Series Agrotron 6.xx: 6.00–6.45; Series Agrotron MK3: ... More
To fit as: Deutz-Fahr Series Agrotron: 80–120, 135, 150; Series Agro...
€868,43 €717,71 €798,96 €660,29
You save 8%
O-ring water pump 80 x 3 mm SAME, Hürlimann, Deutz-Fahr, Lamborghini
€4,15 €3,43
Thrust washer set standard Deutz-Fahr
Engine types: BF4M1012, BF4M1012C/E/EC, BF6M1012, BF6M1012C/E/EC. More
Engine types: BF4M1012, BF4M1012C/E/EC, BF6M1012, BF6M1012C/E/EC.
€45,52 €37,62 €41,88 €34,61
You save 8%
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Sauermann
Supplied with individual certification Ø 30 mm pin More
Supplied with individual certification Ø 30 mm pin
€1.119,87 €925,51 €1.030,28 €851,47
You save 8%
End plate steering valve 210 bar, 140 x 40 x 104 mm
Description: Diese Endsektion ist zum Abschluss einer Wegeventilkombination erforderlich. Die Endsektion ist mit vier Bohrungen zur Befestigung des We... More
Description: Diese Endsektion ist zum Abschluss einer Wegeventilkombin...
€363,63 €300,52 €334,54 €276,48
You save 8%
FTE Clutch master cylinder mineral oil, gray cast iron, with piston rod
FTE
Medium: Mineral oil | Additional information: With piston rod | Material: Grey cast iron More
Medium: Mineral oil | Additional information: With piston rod | Materi...
€331,90 €274,30 €305,35 €252,35
You save 8%
Sealing ring Deutz-Fahr Agrotron 4.70 - 165, K 90 - 610
€74,44 €61,52 €68,48 €56,60
You save 8%
Aircon compressor 12 V, pulley-Ø 148 mm, 2 grooves
Fixing: EM | Reference no.: 4558FK 351130101, QP7H15-8091 | Refrigerant: R 134a | Cylinder capacity (cm³): 155 | Connection type: 7/8"", 3/4"" | Pull... More
Fixing: EM | Reference no.: 4558FK 351130101, QP7H15-8091 | Refrigeran...
€407,02 €336,38 €374,46 €309,47
You save 8%
FEBI Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
FEBI
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95 More
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95
€115,03 €95,07 €98,75 €81,61
You save 14%
HELLA Starter motor 12 V, 3,7 kW, 9 teeth, Ø 89 mm, clockwise
€683,49 €564,87 €526,61 €435,22
You save 23%
Ball joint 390 mm, M22 x 1,5, M24 x 1,5, taper 24,6 - 28,5 mm
A: 390 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. Taper: 24,6 - 28,5 mm. More
A: 390 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. T...
€145,80 €120,50 €134,14 €110,86
You save 8%
Ball joint, complete right 400 mm, M22 x 1,5, taper 25 - 28 mm
A: 400 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 25 mm. F: 28 mm. Taper: 25 - 28 mm. More
A: 400 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 25 mm. F: 28 mm. Taper...
€381,75 €315,50 €351,21 €290,26
You save 8%
VICTOR REINZ Gasket set complete engine BF6M1012 Deutz-Fahr
€644,78 €532,88 €593,20 €490,25
You save 8%
Stop solenoid switch 12 V Deutz-Fahr, Fendt
€568,79 €470,07 €523,29 €432,47
You save 8%
Silencer 4 cylinder 820 mm, inner-Ø upper 72 mm, side 76 mm
Version: 4-cylinder, Length = 820 mm, Inner Ø top = 72 mm, Inner Ø side = 76 mm. More
Version: 4-cylinder, Length = 820 mm, Inner Ø top = 72 mm, Inner Ø s...
€933,73 €771,68 €859,03 €709,94
You save 8%
Bolt set 1ste steering valve 3x M8 x 90
Technical data: 3x M8 x 90. More
Technical data: 3x M8 x 90.
€18,40 €15,21
Mirror set left, length 440 - 670 mm Renault, Deutz-Fahr, Claas
Length: 440 - 670 mm. Installation location: Left. More
Length: 440 - 670 mm. Installation location: Left.
€170,81 €141,17 €157,15 €129,87
You save 8%
Mirror 314 x 228 mm, heated, 12 V, right / left
Dimensions: 314 x 228 mm. Height: 314 mm. Width: 228 mm. Radius of curvature: 1800 mm. Version: Heated. Operating voltage: 12 V. Installation location... More
Dimensions: 314 x 228 mm. Height: 314 mm. Width: 228 mm. Radius of cur...
€267,55 €221,12 €246,15 €203,43
You save 8%
HELLA Inserts work lamp square 83 x 83 mm, H3, 12 / 24 V, 55 W
HELLA
Bulb: Halogen, H3. Form: Square. Nominal voltage: 12 / 24 V. Power consumption: 55 W. Type: Halogen. Light function: Close-range illumination. Additio... More
Bulb: Halogen, H3. Form: Square. Nominal voltage: 12 / 24 V. Power con...
€56,19 €46,44 €54,11 €44,72
You save 4%
Bolt set 2de steering valve 3x M8 x 130
Technical data: 3x M8 x 130. Description: For 1st Control unit. More
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€15,63 €12,91
Gas strut steering column adjustment 400 N, 200 mm, stroke 30 mm
suitable for: Lenksäulenverstellung. Newtons: 400. A: 200 mm. B: 130 mm. C: 10 mm. D: 10 mm. Form: 8. d1: 10 mm. d2: 28 mm. Stroke: 30 mm. To fit: St... More
suitable for: Lenksäulenverstellung. Newtons: 400. A: 200 mm. B: 130 ...
€84,67 €69,98 €77,90 €64,38
You save 8%
Lift rod 630 - 690 mm, ball joint Ø 25,4 mm, M27 x 2 Deutz-Fahr
Dimensions: Length = 630 - 690, Ball joint Ø = 25.4, Clevis Ø = 25, Clevis width = 27, Thread = M27 x 2 mm. More
Dimensions: Length = 630 - 690, Ball joint Ø = 25.4, Clevis Ø = 25, ...
€376,14 €310,86 €346,05 €285,99
You save 8%
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
ROCKINGER
Colour: Black. Description: Entire coupling body and bearing forged, Easy height adjustment thanks to the use of sliding blocks, Cylindrical hitch bol... More
Colour: Black. Description: Entire coupling body and bearing forged, E...
€1.126,27 €930,80 €867,77 €717,17
You save 23%
Cylinder Same Iron 100-165.7, Lamborghini R6.100-R6.165.7
€1.024,16 €846,41 €942,23 €778,70
You save 8%
Loctite / Teroson Glass kit BOND 120 black - 310 ml cartridge
Loctite / Teroson
Colour: Black. Description: TEROSON® BOND 120 is a high-performance glass adhesive with a safe drive away time of 2 hours. Our new product is the per... More
Colour: Black. Description: TEROSON® BOND 120 is a high-performance g...
€29,49 €24,37
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.664,08 €1.375,27 €1.315,63 €1.087,30
You save 21%
Knob green for hydraulics, electronic control
Version: For hydraulics, electronic control. More
Version: For hydraulics, electronic control.
€32,89 €27,18 €30,26 €25,01
You save 8%
Lamp glass right, left
Installation location: Right, left. More
Installation location: Right, left.
€40,49 €33,46
Mekra Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
Mekra
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95 More
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95
€46,78 €38,66 €43,04 €35,57
You save 8%
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 148 mm, 2 grooves
SANDEN
Refrigerant: R 134a | No. of grooves: 2 | Fixing: EM | Nominal voltage (V): 12 | For compressor: SD7H15 | Reference no.: SD7H15-8091, 04437338, 044114... More
Refrigerant: R 134a | No. of grooves: 2 | Fixing: EM | Nominal voltage...
€691,85 €571,78 €636,50 €526,03
You save 8%
MAHLE Starter motor with reduction 12 V, 3,0 kW, 9 teeth, Ø 89 mm, angle l 52
€699,35 €577,98 €418,87 €346,18
You save 40%
Axial joint 210 mm, M22 x 1,5, M24 x 1,5, 32 °, Ø 56 mm, Ø 40 mm
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. Ø B: 56 mm. Ø E: 40 mm. More
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. Ø B: 56 mm. Ø...
€46,98 €38,83 €43,22 €35,72
You save 8%
Universal joint 28,5 x 70,7 mm, bush lubrication
A: 28,5 mm. B: 70,7 mm. Universal joint size: . Lubrication system: Bush lubrication. More
A: 28,5 mm. B: 70,7 mm. Universal joint size: . Lubrication system: Bu...
€177,40 €146,61 €163,21 €134,88
You save 8%
Showing 49 - 96 of 243

Agrotron 110 parts: steering, hitch and starting

The Deutz-Fahr Agrotron 110 does a lot of road and yard work, and that shows first in the steering, the hitch and the starter. This page brings together more than 200 replacement parts that fit the type, made by GRANIT, HELLA, ROCKINGER, Walterscheid and VICTOR REINZ.

Steering and linkage

Complete ball joints for the left and right side are available, as are stabilizers for the linkage and bolt sets. After fitting a new ball joint it pays to measure the toe-in. A small error is invisible, yet it wears the front tyres unevenly over a season. While you are there, check the boots on the other joints too.

Drawbar and Piton Fix

At the rear there are drawbars, drawbar frames and Piton Fix hitches. Give the ball or pin a thin coat of grease from time to time and inspect the locking mechanism at every service, because a worn catch is a real hazard on public roads.

Starter, lights and cab

When the engine turns slowly or not at all, there is a starter motor for this type. If you only hear a click, check the battery, the earth cable and the terminals before replacing the starter. Work lamps and rocker switches, such as the one for the driving lights, are here too. In the cab you will find gas struts for the roof window, wide-angle mirrors and windscreen symbols.

Under the hood there is the V-belt for engine cooling, a front cover gasket and the seal between the manifold and the turbocharger. A leak at that joint is often heard before it is seen, as a hiss under load.

The V-belt deserves a look too. Glazed flanks or fine cracks on the inside mean it is due, even before it starts to squeal. A belt that snaps in the middle of a job soon leaves the engine running hot, so a spare in the toolbox is never wasted.

Type plate and reference number

The type plate confirms that you have an Agrotron 110 in front of you. The old part then settles it: compare its reference number with the parts on this page, and note the side when ordering a ball joint.

These models from the Agrotron range have a page of their own:

If you also run an older or different Deutz-Fahr, begin at all Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart