Menu
EUR

Deutz-Fahr Agrotron 115 tractor parts & technical data

Repairs on the Deutz-Fahr Agrotron 115 go smoother when everything is in one place. This page lists more than 200 parts, such as lighting and electrics.

249 parts found for Deutz-Fahr Agrotron 115
Show:
ROCKINGER Drawbar automatic 48,7 mm, 330 / 25 / 32 mm, 2000 kg, 93,6 kN
€2.805,57 €2.318,65 €2.211,65 €1.827,81
You save 21%
SACHS Clutch plate 330, 41 x 45 mm, 21 splines sintered Deutz-Fahr
SACHS
Dimensions (mm): 41 x 45 21 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 41 x 45 21 grooves | Material specifications: Sintere...
€432,20 €357,19 €397,62 €328,61
You save 8%
LUK Clutch plate 41 x 45 mm, 21 splines, sintered Deutz-Fahr Agrotron
LUK
Dimensions (mm): 41 x 45 21 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 41 x 45 21 grooves | Material specifications: Sintere...
€330,56 €273,19 €304,12 €251,33
You save 8%
Scharmüller Piton Fix inserts 2000 kg, rail 270 mm, working length 154 mm, Kubota gray
Scharmüller
Plate height (mm): 120 | Lock: Piton Fix | Overhang (mm): 154 | Colour: Kubota grey | Hole (mm): M20 | D-value (kN): 89,3 | Guide width (mm): 32 | Rai... More
Plate height (mm): 120 | Lock: Piton Fix | Overhang (mm): 154 | Colour...
€1.124,94 €929,70 €1.034,94 €855,33
You save 8%
Scharmüller Automatic hitch adjustable, rail 270 mm, pin 31 mm, 82,4 kN
Scharmüller
Colour: Kubota grey | Additional information: Automatic pin coupling CH-I (31 mm) | Description: Height adjustable with handle | Rail width (mm): 270 ... More
Colour: Kubota grey | Additional information: Automatic pin coupling C...
€1.171,76 €968,40 €1.078,02 €890,93
You save 8%
External plate PTO clutch 3 mm, inner 136 mm, outer 194 mm
Version: thickness = 3 mm inner = 136 mm outer = 194 mm More
Version: thickness = 3 mm inner = 136 mm outer = 194 mm
€105,56 €87,24 €97,12 €80,26
You save 8%
Expansion valve airco Deutz-Fahr, Lamborghini, Same
€77,13 €63,74 €70,96 €58,64
You save 8%
Symbol differential lock green Deutz-Fahr Agrotron 4.70 - 260
Version: Green, differential lock More
Version: Green, differential lock
€6,96 €5,75
Push button switch PTO shaft 48 V, button yellow, Ø 30 mm Agrotron
Version: 48 V switching voltage Yellow button, make contact Total button travel: 5 mm Ø 30 mm, plug connection (AMP Superseal 3 x 1.5), dustproof and... More
Version: 48 V switching voltage Yellow button, make contact Total butt...
€39,70 €32,81
FEBI Axial joint 210 mm, Ø 56 mm, M22 x 1,5 / M24 x 1,5
€156,85 €129,63 €52,58 €43,45
You save 66%
BOSCH Gear reduction starter 12 V, 3,0 kW, 9 teeth, Ø 89 mm, flange 31 mm
€512,28 €423,37 €493,38 €407,75
You save 4%
Force sensor pin 60 kN, 160 mm, Ø 36,8 mm Deutz-Fahr, Lamborghini
Length: 160 mm. Ø: 36,8 mm. Dimensions: Length = 160, Ø = 36.8 mm. More
Length: 160 mm. Ø: 36,8 mm. Dimensions: Length = 160, Ø = 36.8 mm.
€374,78 €309,74 €344,80 €284,96
You save 8%
Lifting strut complete 710 - 800 mm, M36 x 3 Steyr, Deutz-Fahr
Dimensions: Length = 710 - 800, Ball joint Ø = 25.4, Clevis Ø = 28, Clevis width = 31, Thread = M36 x 3 mm. Reference no.: 1-32-574-020. Menke no.: ... More
Dimensions: Length = 710 - 800, Ball joint Ø = 25.4, Clevis Ø = 28, ...
€313,06 €258,73 €288,02 €238,03
You save 8%
SACHS Single clutch Deutz-Fahr Agrotron 4.70 - 6.20, 80 - 115
€498,22 €411,75 €458,36 €378,81
You save 8%
Scharmüller Automatic hitch adjustable, rail 270 mm, pin 38 mm, 82,4 kN
Scharmüller
Colour: Kubota grey | D-value (kN): 82,4 | Load capacity (kg): 2000 | Plate height (mm): 120 | Rail width (mm): 270 | Description: Height adjustable w... More
Colour: Kubota grey | D-value (kN): 82,4 | Load capacity (kg): 2000 | ...
€1.171,76 €968,40 €1.078,02 €890,93
You save 8%
Scharmüller Ball insert Ball 80 height adjustable, rail 270 mm, 2000 kg
Scharmüller
Lock: ball 80 | Hole (mm): M20 | D-value (kN): 89,3 | Detent pin Ø (mm): 25 | Load capacity (kg): 2000 | Description: Height adjustable with handle |... More
Lock: ball 80 | Hole (mm): M20 | D-value (kN): 89,3 | Detent pin Ø (m...
€1.373,46 €1.135,09 €1.263,58 €1.044,28
You save 8%
AKS-Dasis Condenser 310 x 580 x 22 mm Deutz-Fahr Agrotron
AKS-Dasis
Equipment: Soldered cooling fins | Length (mm): 310 | Width (mm): 580 | Height (mm): 22 | Weight (g): 3.000 More
Equipment: Soldered cooling fins | Length (mm): 310 | Width (mm): 580 ...
€802,20 €662,98 €738,02 €609,94
You save 8%
Filter dryers airco 162 mm, #6 3/8 o-ring, M Deutz-Fahr
Length (mm): 162 | Thread: #6 3/8 O-Ring | Weight (g): 900 | Connection thread: M More
Length (mm): 162 | Thread: #6 3/8 O-Ring | Weight (g): 900 | Connectio...
€66,06 €54,60 €60,78 €50,23
You save 8%
LUK Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
LUK
Dimensions (mm): 20 x 52 x 15 More
Dimensions (mm): 20 x 52 x 15
€35,51 €29,35 €32,67 €27,00
You save 8%
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
Version: Ø 393/364 mm, 129 teeth. More
Version: Ø 393/364 mm, 129 teeth.
€82,99 €68,59 €76,35 €63,10
You save 8%
Radiator copper with frame Deutz-Fahr Agrotron 80-150, 4.70-6.45
To fit as: Deutz-Fahr Series Agrotron: 80–120, 135, 150; Series Agrotron 4.xx: 4.70–4.95; Series Agrotron 6.xx: 6.00–6.45; Series Agrotron MK3: ... More
To fit as: Deutz-Fahr Series Agrotron: 80–120, 135, 150; Series Agro...
€868,43 €717,71 €798,96 €660,29
You save 8%
O-ring water pump 80 x 3 mm SAME, Hürlimann, Deutz-Fahr, Lamborghini
€4,15 €3,43
Thrust washer set standard Deutz-Fahr
Engine types: BF4M1012, BF4M1012C/E/EC, BF6M1012, BF6M1012C/E/EC. More
Engine types: BF4M1012, BF4M1012C/E/EC, BF6M1012, BF6M1012C/E/EC.
€45,52 €37,62 €41,88 €34,61
You save 8%
FTE Clutch master cylinder mineral oil, gray cast iron, with piston rod
FTE
Medium: Mineral oil | Additional information: With piston rod | Material: Grey cast iron More
Medium: Mineral oil | Additional information: With piston rod | Materi...
€331,90 €274,30 €305,35 €252,35
You save 8%
Sealing ring Deutz-Fahr Agrotron 4.70 - 165, K 90 - 610
€74,44 €61,52 €68,48 €56,60
You save 8%
Aircon compressor 12 V, pulley-Ø 148 mm, 2 grooves
Fixing: EM | Reference no.: 4558FK 351130101, QP7H15-8091 | Refrigerant: R 134a | Cylinder capacity (cm³): 155 | Connection type: 7/8"", 3/4"" | Pull... More
Fixing: EM | Reference no.: 4558FK 351130101, QP7H15-8091 | Refrigeran...
€407,02 €336,38 €374,46 €309,47
You save 8%
FEBI Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
FEBI
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95 More
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95
€115,03 €95,07 €98,75 €81,61
You save 14%
HELLA Starter motor 12 V, 3,7 kW, 9 teeth, Ø 89 mm, clockwise
€683,49 €564,87 €526,61 €435,22
You save 23%
Ball joint 390 mm, M22 x 1,5, M24 x 1,5, taper 24,6 - 28,5 mm
A: 390 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. Taper: 24,6 - 28,5 mm. More
A: 390 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. T...
€145,80 €120,50 €134,14 €110,86
You save 8%
Ball joint, complete right 400 mm, M22 x 1,5, taper 25 - 28 mm
A: 400 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 25 mm. F: 28 mm. Taper: 25 - 28 mm. More
A: 400 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 25 mm. F: 28 mm. Taper...
€381,75 €315,50 €351,21 €290,26
You save 8%
Scharmüller Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
Scharmüller
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Colour: Black. Overhang: 155 mm. Description: Height adjustable wit... More
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-val...
€996,85 €823,84 €983,19 €812,56
You save 1%
VICTOR REINZ Gasket set complete engine BF6M1012 Deutz-Fahr
€644,78 €532,88 €593,20 €490,25
You save 8%
Stop solenoid switch 12 V Deutz-Fahr, Fendt
€568,79 €470,07 €523,29 €432,47
You save 8%
Silencer 4 cylinder 820 mm, inner-Ø upper 72 mm, side 76 mm
Version: 4-cylinder, Length = 820 mm, Inner Ø top = 72 mm, Inner Ø side = 76 mm. More
Version: 4-cylinder, Length = 820 mm, Inner Ø top = 72 mm, Inner Ø s...
€933,73 €771,68 €859,03 €709,94
You save 8%
Mirror set left, length 440 - 670 mm Renault, Deutz-Fahr, Claas
Length: 440 - 670 mm. Installation location: Left. More
Length: 440 - 670 mm. Installation location: Left.
€170,81 €141,17 €157,15 €129,87
You save 8%
Mirror 314 x 228 mm, heated, 12 V, right / left
Dimensions: 314 x 228 mm. Height: 314 mm. Width: 228 mm. Radius of curvature: 1800 mm. Version: Heated. Operating voltage: 12 V. Installation location... More
Dimensions: 314 x 228 mm. Height: 314 mm. Width: 228 mm. Radius of cur...
€267,55 €221,12 €246,15 €203,43
You save 8%
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.070,65 €884,83 €1.013,17 €837,33
You save 5%
HELLA Inserts work lamp square 83 x 83 mm, H3, 12 / 24 V, 55 W
HELLA
Bulb: Halogen, H3. Form: Square. Nominal voltage: 12 / 24 V. Power consumption: 55 W. Type: Halogen. Light function: Close-range illumination. Additio... More
Bulb: Halogen, H3. Form: Square. Nominal voltage: 12 / 24 V. Power con...
€56,19 €46,44 €54,11 €44,72
You save 4%
Gas strut steering column adjustment 400 N, 200 mm, stroke 30 mm
suitable for: Lenksäulenverstellung. Newtons: 400. A: 200 mm. B: 130 mm. C: 10 mm. D: 10 mm. Form: 8. d1: 10 mm. d2: 28 mm. Stroke: 30 mm. To fit: St... More
suitable for: Lenksäulenverstellung. Newtons: 400. A: 200 mm. B: 130 ...
€84,67 €69,98 €77,90 €64,38
You save 8%
Lift rod 630 - 690 mm, ball joint Ø 25,4 mm, M27 x 2 Deutz-Fahr
Dimensions: Length = 630 - 690, Ball joint Ø = 25.4, Clevis Ø = 25, Clevis width = 27, Thread = M27 x 2 mm. More
Dimensions: Length = 630 - 690, Ball joint Ø = 25.4, Clevis Ø = 25, ...
€376,14 €310,86 €346,05 €285,99
You save 8%
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 170 mm. Colour: Black. Overhang... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
Cylinder Same Iron 100-165.7, Lamborghini R6.100-R6.165.7
€1.024,16 €846,41 €942,23 €778,70
You save 8%
Showing 49 - 96 of 249

Deutz-Fahr Agrotron 115 parts

On an Agrotron 115 it is rarely one big component that lets you down. More often it is a roof window that no longer stays up, a mirror knocked off by a branch or a rocker switch that has lost its click. This page has more than 200 parts for this model, from GRANIT, Scharmüller, HELLA, ROCKINGER and Walterscheid.

Engine and belts

Under the bonnet you will find V-belts, including the one for engine cooling, gaskets such as the front cover gasket, and seals like the one between the manifold and the turbocharger. A leak at that joint is usually heard before it is seen, as a hiss under load. There are also starter motors for the Agrotron 115.

Cab, mirrors and switches

For the cab there are gas struts, for the roof window among others, wide angle mirrors and rocker switches, for example for the driving lights. There are also symbols for the windscreen and controls, handy when the print has worn off after years of use.

Replace gas struts as a pair when two hold the same window or hatch. A new strut next to a tired old one twists the frame and wears out faster. Fit the strut with the piston rod pointing down so the internal seal stays lubricated.

Hitches and steering

For the rear there are automatic drawbars, top drawbars, automatic hitches, Piton Fix hitches and adapter plates. Rail width and coupling pin diameter both have to match, so measure them on the existing part before ordering. For the steering there are ball joints, and work lamps cover the late evenings. When fitting a new ball joint, tighten the taper nut to the correct torque and use a new split pin, never the old one.

Matching parts to your tractor

The type plate gives you the model and chassis number. On the part you take off, look for a reference number: on a starter motor it is on the starter's own plate, on mirrors and switches it is often on the back.

Other models in the Agrotron line have their own page. If you run another Agrotron alongside the 115, its parts are on the Deutz-Fahr Agrotron 85, Deutz-Fahr Agrotron 100, Deutz-Fahr Agrotron 106, Deutz-Fahr Agrotron 120, Deutz-Fahr Agrotron 135 and Deutz-Fahr Agrotron 150 pages. The line also includes the Agrotron 90 and the Agrotron 105, which do not have a page of their own here. Each page shows only what fits that one model. If you run other Deutz-Fahr tractors too, start from Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart