Menu
EUR

Deutz-Fahr Agrotron 115 tractor parts & technical data

Repairs on the Deutz-Fahr Agrotron 115 go smoother when everything is in one place. This page lists more than 200 parts, such as lighting and electrics.

249 parts found for Deutz-Fahr Agrotron 115
Show:
GRANIT Ball joint, complete right 400 mm, M22 x 1,5, taper 25 - 28 mm
GRANIT
A: 400 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 25 mm. F: 28 mm. Taper: 25 - 28 mm. More
A: 400 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 25 mm. F: 28 mm. Taper...
€365,83 €302,34 €347,50 €287,19
You save 5%
Ball joint, complete left 460 mm, M22 x 1,5, M22 x 1,5
A: 460 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 25 mm. F: 28 mm. Taper: 25 - 28 mm. More
A: 460 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 25 mm. F: 28 mm. Taper...
€365,83 €302,34 €347,50 €287,19
You save 5%
Gaiter for brake linkage foot brake
€65,94 €54,50 €62,60 €51,74
You save 5%
Shim foot brake 3 mm thick Deutz Agrotron 6120.4-6160.4
€60,44 €49,95 €57,40 €47,44
You save 5%
GRANIT Brake disc Ø 241 mm, thickness 4,85 mm, 28 teeth, version Sirmac
€65,62 €54,23 €62,30 €51,49
You save 5%
External plate AV35 powershift 2,2 mm, inner 77,3 mm, 30 teeth
Version: Thickness: 2.2 mm, Inner: 77.3 mm, Outer: 118.3 mm, 30 teeth. More
Version: Thickness: 2.2 mm, Inner: 77.3 mm, Outer: 118.3 mm, 30 teeth.
€34,50 €28,51 €32,75 €27,07
You save 5%
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Lock: KS80. Menke no.: 67134. More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.682,20 €1.390,25
GRANIT Thermostat Ø 42 mm Deutz-Fahr Agroplus 75-100, Agrotron 4.70-115
€84,71 €70,01 €80,45 €66,49
You save 5%
O-ring 48 x 5 mm SAME, Deutz-Fahr, Lamborghini
Dimensions: 48 x 5 mm. More
Dimensions: 48 x 5 mm.
€4,28 €3,54
GRANIT Glow plug red 12 V, M12 x 1,25 Fendt, SAME, Deutz-Fahr
GRANIT
Version: 12 V, Thread M12 x 1.25. More
Version: 12 V, Thread M12 x 1.25.
€55,60 €45,95 €52,80 €43,64
You save 5%
GRANIT Inlet valve engine Deutz-Fahr Agroplus 75-100, Agrotron 4.70-115
€37,80 €31,24 €35,90 €29,67
You save 5%
Feed pump 2 hole, hole spacing horizontal 78 mm, pulley Ø 102 mm
Version: 2 holes, Horizontal hole spacing: 78 mm, Centrifugal pump, pulley Ø 102 mm. To fit: Deutz, Lamborghini, Same. More
Version: 2 holes, Horizontal hole spacing: 78 mm, Centrifugal pump, pu...
€94,04 €77,72 €89,30 €73,80
You save 5%
GRANIT Hydraulic pump 32 cm³/rpm., 13 splines Deutz-Fahr Agrotron 106-150
GRANIT
Drive shaft: Splined shaft SAE, Ø 21.8 Z13. Direction of rotation: Clockwise. Output volume: 32 cc/rev. More
Drive shaft: Splined shaft SAE, Ø 21.8 Z13. Direction of rotation: Cl...
€1.238,65 €1.023,68
GRANIT Replacement key plastic-coated black, lock number 14644
GRANIT
Locking number: 14644. Version: Locking no. 14644 <lt>br<gt> To fit: Deutz-Fahr</gt></lt>. More
Locking number: 14644. Version: Locking no. 14644 <lt>br<gt> To fit: D...
€17,70 €14,63
GRANIT Replacement glass 300 x 214 x 3 mm, can be heated, right / left, 12 V
GRANIT
Dimensions: 300 x 214 x 3 mm. Version: Can be heated. Installation location: Right/left. Volts: 12. Radius of curvature: 1800 mm. More
Dimensions: 300 x 214 x 3 mm. Version: Can be heated. Installation loc...
€70,52 €58,28 €63,80 €52,73
You save 10%
Gas strut hood 450 N, 325 mm Deutz-Fahr Agrotron 4.70-150
Newtons: 450. A: 325 mm. B: 165 mm. C: 10 mm. D: 10 mm. To fit: bonnet. Form: 6. More
Newtons: 450. A: 325 mm. B: 165 mm. C: 10 mm. D: 10 mm. To fit: bonnet...
€68,63 €56,72 €62,00 €51,24
You save 10%
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 38 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€849,73 €702,26 €751,50 €621,07
You save 12%
Scharmüller Drawbar manual rail width 330 mm, coupling pin 31 mm, 82,4 kN
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€637,08 €526,51 €563,40 €465,62
You save 12%
Showing 145 - 168 of 249

Deutz-Fahr Agrotron 115 parts

On an Agrotron 115 it is rarely one big component that lets you down. More often it is a roof window that no longer stays up, a mirror knocked off by a branch or a rocker switch that has lost its click. This page has more than 200 parts for this model, from GRANIT, Scharmüller, HELLA, ROCKINGER and Walterscheid.

Engine and belts

Under the bonnet you will find V-belts, including the one for engine cooling, gaskets such as the front cover gasket, and seals like the one between the manifold and the turbocharger. A leak at that joint is usually heard before it is seen, as a hiss under load. There are also starter motors for the Agrotron 115.

Cab, mirrors and switches

For the cab there are gas struts, for the roof window among others, wide angle mirrors and rocker switches, for example for the driving lights. There are also symbols for the windscreen and controls, handy when the print has worn off after years of use.

Replace gas struts as a pair when two hold the same window or hatch. A new strut next to a tired old one twists the frame and wears out faster. Fit the strut with the piston rod pointing down so the internal seal stays lubricated.

Hitches and steering

For the rear there are automatic drawbars, top drawbars, automatic hitches, Piton Fix hitches and adapter plates. Rail width and coupling pin diameter both have to match, so measure them on the existing part before ordering. For the steering there are ball joints, and work lamps cover the late evenings. When fitting a new ball joint, tighten the taper nut to the correct torque and use a new split pin, never the old one.

Matching parts to your tractor

The type plate gives you the model and chassis number. On the part you take off, look for a reference number: on a starter motor it is on the starter's own plate, on mirrors and switches it is often on the back.

Other models in the Agrotron line have their own page. If you run another Agrotron alongside the 115, its parts are on the Deutz-Fahr Agrotron 85, Deutz-Fahr Agrotron 100, Deutz-Fahr Agrotron 106, Deutz-Fahr Agrotron 120, Deutz-Fahr Agrotron 135 and Deutz-Fahr Agrotron 150 pages. The line also includes the Agrotron 90 and the Agrotron 105, which do not have a page of their own here. Each page shows only what fits that one model. If you run other Deutz-Fahr tractors too, start from Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart