Menu
EUR

Deutz-Fahr Agrotron 135 MK3 tractor parts & technical data

On this page you get more than 200 parts for the Deutz-Fahr Agrotron 135 MK3. Trailer couplings, lighting and electrics are easy to find without a long search.

233 parts found for Deutz-Fahr Agrotron 135 MK3
Show:
Gaiter for brake linkage foot brake
€65,94 €54,50 €62,60 €51,74
You save 5%
Shim foot brake 3 mm thick Deutz Agrotron 6120.4-6160.4
€60,44 €49,95 €57,40 €47,44
You save 5%
GRANIT Brake disc Ø 241 mm, thickness 4,85 mm, 28 teeth, version Sirmac
€65,62 €54,23 €62,30 €51,49
You save 5%
External plate AV35 powershift 2,2 mm, inner 77,3 mm, 30 teeth
Version: Thickness: 2.2 mm, Inner: 77.3 mm, Outer: 118.3 mm, 30 teeth. More
Version: Thickness: 2.2 mm, Inner: 77.3 mm, Outer: 118.3 mm, 30 teeth.
€34,50 €28,51 €32,75 €27,07
You save 5%
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Lock: KS80. Menke no.: 67134. More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.682,20 €1.390,25
O-ring 48 x 5 mm SAME, Deutz-Fahr, Lamborghini
Dimensions: 48 x 5 mm. More
Dimensions: 48 x 5 mm.
€4,28 €3,54
GRANIT Glow plug red 12 V, M12 x 1,25 Fendt, SAME, Deutz-Fahr
GRANIT
Version: 12 V, Thread M12 x 1.25. More
Version: 12 V, Thread M12 x 1.25.
€55,60 €45,95 €52,80 €43,64
You save 5%
Thrust washer set standard Deutz-Fahr
Engine types: BF4M1013, BF4M1013C, BF4M1013E, BF4M1013, BF6M1013C/CP/E/EC. More
Engine types: BF4M1013, BF4M1013C, BF4M1013E, BF4M1013, BF6M1013C/CP/E...
€36,72 €30,35 €34,85 €28,80
You save 5%
GRANIT Air receiver gasket
€12,40 €10,25
Feed pump 2 hole, hole spacing horizontal 78 mm, pulley Ø 102 mm
Version: 2 holes, Horizontal hole spacing: 78 mm, Centrifugal pump, pulley Ø 102 mm. To fit: Deutz, Lamborghini, Same. More
Version: 2 holes, Horizontal hole spacing: 78 mm, Centrifugal pump, pu...
€94,04 €77,72 €89,30 €73,80
You save 5%
Bosch/Rexroth Hydraulic pump clockwise 45 cm³/rpm.
Bosch/Rexroth
Output volume: 45 cc/rev. Direction of rotation: Right. More
Output volume: 45 cc/rev. Direction of rotation: Right.
€4.487,64 €3.708,79 €4.263,25 €3.523,35
You save 5%
GRANIT Hydraulic pump 32 cm³/rpm., 13 splines Deutz-Fahr Agrotron 106-150
GRANIT
Drive shaft: Splined shaft SAE, Ø 21.8 Z13. Direction of rotation: Clockwise. Output volume: 32 cc/rev. More
Drive shaft: Splined shaft SAE, Ø 21.8 Z13. Direction of rotation: Cl...
€1.238,65 €1.023,68
GRANIT Door lock, left Deutz-Fahr Agrotron 4.70-260, Lamborghini
€178,48 €147,50 €169,50 €140,08
You save 5%
GRANIT Replacement key plastic-coated black, lock number 14644
GRANIT
Locking number: 14644. Version: Locking no. 14644 <lt>br<gt> To fit: Deutz-Fahr</gt></lt>. More
Locking number: 14644. Version: Locking no. 14644 <lt>br<gt> To fit: D...
€17,70 €14,63
GRANIT Mounting bracket force sensor pin Deutz-Fahr, Lamborghini
€82,04 €67,80 €77,90 €64,38
You save 5%
GRANIT Replacement glass 300 x 214 x 3 mm, can be heated, right / left, 12 V
GRANIT
Dimensions: 300 x 214 x 3 mm. Version: Can be heated. Installation location: Right/left. Volts: 12. Radius of curvature: 1800 mm. More
Dimensions: 300 x 214 x 3 mm. Version: Can be heated. Installation loc...
€70,52 €58,28 €63,80 €52,73
You save 10%
Mirror set left, length 440 - 670 mm Renault, Deutz-Fahr, Claas
Length: 440 - 670 mm. Installation location: Left. More
Length: 440 - 670 mm. Installation location: Left.
€171,87 €142,04 €155,50 €128,51
You save 10%
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 38 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€849,73 €702,26 €751,50 €621,07
You save 12%
Showing 145 - 168 of 233

Deutz-Fahr Agrotron 135 MK3 parts for the seat, hitch and engine

Start with the type plate. If it reads Agrotron 135 MK3, the more than 200 replacement parts on this page are matched to your tractor, from GRANIT and from brands such as HELLA, GRAMMER, Scharmüller and ROCKINGER. If you still have the old part, look for a stamped or printed reference number on it, as that is usually the quickest route to the right replacement.

Cab and operator comfort

Seats tend to wear out long before the rest of the tractor. You will find air suspended tractor seats such as the Maximo Dynamic, plus a PROBOSS seat with a seat heater. Alongside them are gas struts for the door, front window and rear window, wide-angle mirrors, rocker switches for the driving lights and flood beam work lamps for long evenings in the field. When swapping a seat, check how the old one is bolted to the seat console before choosing its replacement.

A tip on gas struts: fit them with the piston rod pointing down so the seal stays in its oil film, and replace the struts on a door or window as a pair. A single new strut next to a tired one ends up carrying the full load and wears out early.

Hitch, hydraulics and engine

At the rear there are drawbars and top drawbars on rails, Piton Fix hitches and adapter plates. Before ordering, check the rail width and pin diameter of the hitch currently fitted, because those decide whether a new one slides into the existing guide. Steering is covered by ball joints and the linkage by hydraulic pumps. For the engine there are starter motors, intake manifold gaskets and cylinder head gaskets made for the Agrotron.

Starter motors deserve a quick comparison before ordering too. The mounting flange, the number of teeth on the pinion and the position of the terminals should all match the unit coming off. Clean the earth strap and battery terminals while you are at it, because a poor connection makes even a new starter turn slowly.

Other Agrotron MK3 models

Each model in the Agrotron MK3 range has a page of its own, so if you run more than one, check every machine separately: Deutz-Fahr Agrotron 85 MK3, Deutz-Fahr Agrotron 100 MK3, Deutz-Fahr Agrotron 105 MK3, Deutz-Fahr Agrotron 115 MK3 and Deutz-Fahr Agrotron 150 MK3. That way a part ordered for one tractor does not end up on the bench next to the wrong one. For the rest of the brand, from older tractors to newer series, go to all Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart