Menu
EUR

Deutz-Fahr Agrotron 135 tractor parts & technical data

Find the right part for your Deutz-Fahr Agrotron 135 quickly: choose from more than 200 items, including trailer couplings, lighting and electrics.

243 parts found for Deutz-Fahr Agrotron 135
Show:
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Lock: KS80. Menke no.: 67134. More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.682,20 €1.390,25
GRANIT Cylinder head gasket 1,6 mm, 2 bores, Deutz-Fahr Agrotron 100-260
€45,29 €37,43 €43,00 €35,54
You save 5%
O-ring 48 x 5 mm SAME, Deutz-Fahr, Lamborghini
Dimensions: 48 x 5 mm. More
Dimensions: 48 x 5 mm.
€4,28 €3,54
GRANIT Glow plug red 12 V, M12 x 1,25 Fendt, SAME, Deutz-Fahr
GRANIT
Version: 12 V, Thread M12 x 1.25. More
Version: 12 V, Thread M12 x 1.25.
€55,60 €45,95 €52,80 €43,64
You save 5%
Thrust washer set standard Deutz-Fahr
Engine types: BF4M1013, BF4M1013C, BF4M1013E, BF4M1013, BF6M1013C/CP/E/EC. More
Engine types: BF4M1013, BF4M1013C, BF4M1013E, BF4M1013, BF6M1013C/CP/E...
€36,72 €30,35 €34,85 €28,80
You save 5%
GRANIT Air receiver gasket
€12,40 €10,25
Feed pump 2 hole, hole spacing horizontal 78 mm, pulley Ø 102 mm
Version: 2 holes, Horizontal hole spacing: 78 mm, Centrifugal pump, pulley Ø 102 mm. To fit: Deutz, Lamborghini, Same. More
Version: 2 holes, Horizontal hole spacing: 78 mm, Centrifugal pump, pu...
€94,04 €77,72 €89,30 €73,80
You save 5%
GRANIT Hydraulic pump 32 cm³/rpm., 13 splines Deutz-Fahr Agrotron 106-150
GRANIT
Drive shaft: Splined shaft SAE, Ø 21.8 Z13. Direction of rotation: Clockwise. Output volume: 32 cc/rev. More
Drive shaft: Splined shaft SAE, Ø 21.8 Z13. Direction of rotation: Cl...
€1.238,65 €1.023,68
GRANIT Replacement key plastic-coated black, lock number 14644
GRANIT
Locking number: 14644. Version: Locking no. 14644 <lt>br<gt> To fit: Deutz-Fahr</gt></lt>. More
Locking number: 14644. Version: Locking no. 14644 <lt>br<gt> To fit: D...
€17,70 €14,63
GRANIT Replacement glass 300 x 214 x 3 mm, can be heated, right / left, 12 V
GRANIT
Dimensions: 300 x 214 x 3 mm. Version: Can be heated. Installation location: Right/left. Volts: 12. Radius of curvature: 1800 mm. More
Dimensions: 300 x 214 x 3 mm. Version: Can be heated. Installation loc...
€70,52 €58,28 €63,80 €52,73
You save 10%
Gas strut hood 450 N, 325 mm Deutz-Fahr Agrotron 4.70-150
Newtons: 450. A: 325 mm. B: 165 mm. C: 10 mm. D: 10 mm. To fit: bonnet. Form: 6. More
Newtons: 450. A: 325 mm. B: 165 mm. C: 10 mm. D: 10 mm. To fit: bonnet...
€68,63 €56,72 €62,00 €51,24
You save 10%
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 38 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€849,73 €702,26 €751,50 €621,07
You save 12%
Scharmüller Drawbar manual rail width 330 mm, coupling pin 31 mm, 82,4 kN
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€637,08 €526,51 €563,40 €465,62
You save 12%
Scharmüller Drawbar frame K80 330/25/32, 3500/4000 kg, black
Scharmüller
To fit as: Case IH Serie CS, CVX; Deutz-Fahr Serie Agrotron 4.70-6.45 (MK1), Agrotron 80-165 (MK2/MK3), Agrotron 80-180.7, Agrotron M, Agrotron TTV; H... More
To fit as: Case IH Serie CS, CVX; Deutz-Fahr Serie Agrotron 4.70-6.45 ...
€2.505,76 €2.070,88 €2.216,00 €1.831,41
You save 12%
HELLA Replacement cover orange with optics, test mark E4 6509 ECE
HELLA
Colour: Yellow. Test mark: E4 6509, ECE, K 18614. Additional information: • With pattern. More
Colour: Yellow. Test mark: E4 6509, ECE, K 18614. Additional informati...
€42,40 €35,04
HELLA Inserts work lamp square 83 x 83 mm, H3, 12 / 24 V, 55 W
HELLA
Bulb: Halogen, H3. Form: Square. Nominal voltage: 12 / 24 V. Power consumption: 55 W. Type: Halogen. Light function: Close-range illumination. Additio... More
Bulb: Halogen, H3. Form: Square. Nominal voltage: 12 / 24 V. Power con...
€54,11 €44,72
Stabilus Gas strut roof window 150 N, 235 mm, stroke 81 mm Deutz-Fahr
Stabilus
To fit as: Deutz Roof hatch More
To fit as: Deutz Roof hatch
€28,15 €23,26
Showing 145 - 168 of 243

Parts for the Deutz-Fahr Agrotron 135, from cylinder head to hitch

An Agrotron 135 puts in long hours in front of heavy implements, which asks a lot of both the engine and the hitch. This page brings together more than 200 parts for the model, from GRANIT, Scharmüller, HELLA, ROCKINGER and Walterscheid.

Engine work

If the engine is losing coolant or shows oil in the water, a new cylinder head gasket is on this page. There is also an intake manifold gasket, V-belts that fit the Agrotron and a starter motor for cold mornings.

A tip for the head gasket job: clean both faces thoroughly without scratching them, check the head for flatness with a straight edge, and tighten the bolts in the specified sequence and in stages with a torque wrench. A head that is not flat will push a new gasket out again before long.

Hitch and drawbar

For the rear there are drawbars, an automatic hitch, a top drawbar and Piton Fix from makers such as Scharmüller and Walterscheid. An adapter plate moves the coupling to a different height. When replacing a drawbar, check the pin and the locking parts of the pick-up hitch as well, because they wear along with it.

Cab, lights and steering

Gas struts for the roof hatch, wide-angle mirrors and rocker switches for the driving lights put the cab back in order. Wide beam work lamps light up the field in the evening. Ball joints remove play from the steering, and new symbols make worn switches readable again.

Working out what you need

Check the serial plate to make sure it is an Agrotron 135. With a head gasket, the thickness matters, and the old gasket often shows it as holes or notches along the edge. For hitch parts, take the rail width and pin diameter from the unit that is fitted now.

Piton Fix and the pick-up hitch rail wear faster than many expect. Grease the rail regularly and check that the locking pin still drops fully home. A worn pin or guide gives play that you feel as a jolt through the tractor when braking with a heavy trailer.

Other Agrotron models

Each of these has its own page listing the parts that fit that tractor:

Everything for the brand is under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart