Keeping a Deutz-Fahr Agrotron 150 MK3 in good shape? More than 200 parts for this type are listed here, including lighting, trailer couplings and electrics.
Cab door swinging shut on you, or the rear window creeping down? On an Agrotron 150 MK3 that usually points to a worn gas strut. Gas struts are where this page starts, but there is a lot more. More than 200 replacement parts fit this model, made by GRANIT and by suppliers such as HELLA, Scharmüller, GRAMMER and ROCKINGER.
Next to gas struts for the door, the front window and the rear window you will find tractor seats, including an air suspended Maximo Dynamic from GRAMMER and a PROBOSS seat with a seat heater. There are rocker switches, for example for the driving lights, and wide-angle mirrors for a better view behind the tractor. HELLA work lamps complete the cab side.
When fitting a gas strut, mount it with the piston rod pointing down. That keeps the seal bathed in oil and the strut lasts longer. If a door or window uses two struts, always replace both, otherwise the panel twists.
For engine work there is a cylinder head gasket made for the Agrotron range, gaskets such as the one for the air receiver, and starter motors for a tractor that refuses to turn over. The steering side has ball joints, the hydraulic side a hydraulic pump. Once the head is off, check both head and block faces for distortion and never reuse the gasket.
At the back it is about drawbars, a top drawbar, Piton Fix parts from Scharmüller and adapter plates that let you set the hitch height to suit the trailer. That way a worn pin or hook can be swapped on its own.
The designation Agrotron 150 MK3 is on the serial plate, and that is the first thing to check before ordering. Several models in the MK3 range look alike, so the badge on the bonnet does not tell the whole story. With the old part in your hand, find the number stamped into or printed on it and compare it with the details shown with the product.
The other models of the MK3 range each have a page of their own: the Agrotron 85 MK3, Agrotron 100 MK3, Agrotron 105 MK3, Agrotron 115 MK3 and Agrotron 135 MK3. Useful when there is more than one Agrotron on the farm. Everything else from the brand sits under Deutz-Fahr parts.
