Menu
EUR

Deutz-Fahr Agrotron 200 tractor parts & technical data

There is no need to hunt around for Deutz-Fahr Agrotron 200 parts. This page shows more than 200 of them, including lighting, trailer couplings and electrics.

232 parts found for Deutz-Fahr Agrotron 200
Show:
Alternator 14 V / 95 A, flange 56 mm
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | Pulley Ø (mm): - | Form: B | Flange size (mm): 56,0 | Nominal values (V / A): 1... More
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | ...
€185,86 €153,60 €176,55 €145,91
You save 5%
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, mounting Ø 89 mm, clockwise
€571,00 €471,90 €459,00 €379,34
You save 20%
GRANIT Strainer brake reservoir Deutz-Fahr
VICTOR REINZ Valve stem seal set Ø 9 x 1,5 mm
€37,35 €30,87
Radiator filler cap reservoir Ø 56 mm, height 21 mm
Version: for expansion tank. Neck Ø: 56 mm. Height: 21 mm. More
Version: for expansion tank. Neck Ø: 56 mm. Height: 21 mm.
€105,05 €86,82 €99,75 €82,44
You save 5%
Thermag nut exhaust manifold M8, height 8,5 mm Deutz FL712, FL812
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8.5 mm. More
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8....
€1,21 €1,00
GRAMMER Tractor seat Maximo Dynamic DDS MSG95AL/741 Fendt, Deutz, Deutz-Fahr
GRAMMER
To fit: Deutz VII. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 550 mm. Joystick co... More
To fit: Deutz VII. Suspension: Air suspension. Upholstery type: Fabric...
€3.442,00 €2.844,63
Gas strut door 750 N, 240 mm, stroke 73 mm
suitable for: Tür. Newtons: 750. A: 240 mm. B: 120 mm. C: 10 mm. D: 10 mm. Form: 6. d1: 8 mm. d2: 19 mm. Stroke: 73 mm. To fit: Door. More
suitable for: Tür. Newtons: 750. A: 240 mm. B: 120 mm. C: 10 mm. D: 1...
€33,07 €27,33 €31,40 €25,95
You save 5%
GRANIT Handle Deutz-Fahr Series 5600-6095HTS, Agrotron 4.70-260
€250,59 €207,10 €238,00 €196,69
You save 5%
PROBOSS Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
PROBOSS
To fit: Deutz V1. On-board voltage: 12 V. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 520 mm. Joystick console... More
To fit: Deutz V1. On-board voltage: 12 V. Upholstery type: Fabric. Sea...
€1.903,30 €1.572,98
GRANIT Gas strut roof window 150 N, 235 mm SAME, Hürlimann, Lamborghini
GRANIT
Newtons: 150. A: 235 mm. B: 110 mm. C: 8 mm. D: 8 mm. Form: 2. More
Newtons: 150. A: 235 mm. B: 110 mm. C: 8 mm. D: 8 mm. Form: 2.
€26,80 €22,15
HELLA Symbol work lamp green
HELLA
Version: Green, work light. Colour: grün. To fit: HELLA Schalter Serien 4570 und 7832. Symbol: Arbeitsbeleuchtung. More
Version: Green, work light. Colour: grün. To fit: HELLA Schalter Seri...
€2,88 €2,38
HELLA Work lamp flood beam H3, 182 x 102 x 103 mm, 12 V, built-in
HELLA
Nominal voltage: 12 V. Form: Rectangular. Dimensions W x H x D: 182 x 102 x 103 mm. Light function: Close-range illumination. Bulb: H3. Material: Hous... More
Nominal voltage: 12 V. Form: Rectangular. Dimensions W x H x D: 182 x ...
€60,65 €50,12
GRANIT Work lamp spotlight H3 70 W, 12 / 24 V, 100 x 91 mm, upright
GRANIT
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 100 x 91 mm. Light function: Far-reaching illumination. Connection: AMP plug. Bulb: 12... More
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 100 x ...
€51,14 €42,26 €46,25 €38,22
You save 10%
GRANIT Indicator/position light rectangular red P21W, R5W left
GRANIT
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Red, white. Form: Rectangular. Installation location: Left. Nominal voltage: 12 V. Type: Bulb. Mounting ty... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Red, white. Form: Rectangu...
€360,00 €297,52
Relays N/O-contact 12 V, 40 A, 4-pin, blade connection
Version: 12 V / 40 A, Without bracket, 4-pin, blade terminal. More
Version: 12 V / 40 A, Without bracket, 4-pin, blade terminal.
€9,35 €7,73
Elring Gasket set complete with oil sump gasket engine BF6M1013
Elring
Supplementary set: with oil sump gasket | Additional information: with crankshaft sealing ring / without cylinder head gasket More
Supplementary set: with oil sump gasket | Additional information: with...
€637,97 €527,25 €606,00 €500,83
You save 5%
Scharmüller Drawbar frame 43,2 kN, 2000 kg, rail 330 mm, pin Ø 25 mm, draw pendulum
Scharmüller
Rail width (mm): 330 | D-value (kN): 43,2 | Colour: Kubota grey | Detent pin Ø (mm): 25 | Load capacity (kg): 2000 | Version: Prepared for drawbar | ... More
Rail width (mm): 330 | D-value (kN): 43,2 | Colour: Kubota grey | Dete...
€836,65 €691,45
Scharmüller Drawbar frame 43,2 kN, rail 270 mm, guide 32 mm, pin Ø 25 mm
Scharmüller
Category: Bearing supports | Colour: Kubota grey | Guide width (mm): 32 | D-value (kN): 43,2 | Load capacity (kg): 2000 | Detent pin Ø (mm): 25 | Ver... More
Category: Bearing supports | Colour: Kubota grey | Guide width (mm): 3...
€1.034,55 €855,00
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, fan
MAHLE
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | Installation angle (°): l + r 60 | Belt width (mm) / type: - | Direction of rot... More
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | ...
€448,64 €370,78 €280,40 €231,74
You save 38%
GRANIT Filter dryer 267 mm, #6 3/8 o-ring, connection thread M/F
GRANIT
Weight (g): 1200 | Connection thread: M/F | Thread: #6 3/8 O-ring | Length (mm): 267 More
Weight (g): 1200 | Connection thread: M/F | Thread: #6 3/8 O-ring | Le...
€48,47 €40,06 €46,00 €38,02
You save 5%
GRANIT Starter ring gear Ø 393/364 mm, 129 teeth Deutz
GRANIT
Version: Ø 393/364 mm, 129 teeth. More
Version: Ø 393/364 mm, 129 teeth.
€79,53 €65,73 €75,55 €62,44
You save 5%
VICTOR REINZ Exhaust manifold gasket
€6,30 €5,21
Showing 73 - 96 of 232

Deutz-Fahr Agrotron 200 parts from the seat to the starter motor

Days on an Agrotron 200 are long, and a seat that has lost its suspension makes itself felt in your back by the end of the season. That is why this page starts in the cab. Altogether it lists more than 200 replacement parts for this Deutz-Fahr, from GRANIT, HELLA, GRAMMER, PROBOSS and ROCKINGER.

Seating and the operator station

There are air suspended tractor seats, such as the Maximo Professional from GRAMMER, and PROBOSS seats with a seat heater. Add to that gas struts for the roof window, rocker switches for the dash and wide-angle mirrors.

If an air suspended seat slowly sinks, look for a leak in the air bag or the small hoses before you think about a new seat. If the compressor under the seat does not run, check the fuse and the plug. Adjust a new seat to your own weight once it is fitted, or the suspension will bottom out on every bump.

Engine, drive and climate

Engine parts for the Agrotron 200 include cylinder head gaskets, an air receiver gasket, V-belts, an alternator, a starter motor and an aircon compressor. The hydraulics are covered with seals and O-rings for valves. Wet new O-rings with clean hydraulic oil before pressing them into a valve, because rings fitted dry are easily nicked on sharp edges.

A V-belt that is glazed on its flanks or cracked on the underside will slip, and the alternator and compressor then only do half their job. Replace it in good time and check the tension while you are at it, because a belt that is too tight loads the bearings of everything it drives.

Lights and drawbar

For work after dark there are flood beam work lamps, and at the rear automatic drawbars. Grease the jaw mechanism now and then so that hitching from the seat stays smooth.

Model and series

Read the type and serial number from the type plate on your Agrotron. Hold the reference number from the old part next to it and compare it with the parts on this page. These other Agrotron models have a page of their own:

The Agrotron 135 and 105 belong to the same range. Check fitment for each model on its own. For the rest of the make, go to Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart