Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Deutz-Fahr Agrotron 85 MK3 tractor parts & technical data

More than 200 parts fit the Deutz-Fahr Agrotron 85 MK3. They are listed here by group, with lighting, trailer couplings and electrics among them.

211 parts found for Deutz-Fahr Agrotron 85 MK3
Show:
Controls linkage for lifting unit control
Version: For lifting unit control. More
Version: For lifting unit control.
€333,49 €275,61
HELLA Work lamp flood beam H3, 182 x 102 x 103 mm, 12 V, built-in
HELLA
Nominal voltage: 12 V. Form: Rectangular. Dimensions W x H x D: 182 x 102 x 103 mm. Light function: Close-range illumination. Bulb: H3. Material: Hous... More
Nominal voltage: 12 V. Form: Rectangular. Dimensions W x H x D: 182 x ...
€63,01 €52,07 €60,67 €50,14
You save 4%
Indicator/position light rectangular red P21W, R5W left
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Red, white. Form: Rectangular. Installation location: Left. Nominal voltage: 12 V. Type: Bulb. Mounting ty... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Red, white. Form: Rectangu...
€360,10 €297,60
Stabilus Gas strut roof window 150 N, 235 mm, stroke 81 mm Deutz-Fahr
Stabilus
To fit as: Deutz Roof hatch More
To fit as: Deutz Roof hatch
€29,43 €24,32
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, mounting Ø 89 mm, clockwise
€595,84 €492,43 €459,08 €379,41
You save 23%
Ball joint, complete right 350 mm, M22 x 1,5, taper 25 - 28 mm
A: 350 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 25 mm. F: 28 mm. Taper: 25 - 28 mm. More
A: 350 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 25 mm. F: 28 mm. Taper...
€372,49 €307,84 €342,69 €283,22
You save 8%
LUK Pilot bearing 20 x 52 x 15 mm
LUK
Dimensions: 20 x 52 x 15 mm. More
Dimensions: 20 x 52 x 15 mm.
€32,83 €27,13 €30,20 €24,96
You save 8%
Master brake cylinder mineral oil, Ø 23,81 mm Deutz Agrotron MK3, New, K
Medium: Mineral oil. Hole Ø: 23.81 mm. More
Medium: Mineral oil. Hole Ø: 23.81 mm.
€434,03 €358,70 €399,31 €330,01
You save 8%
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Lock: KS80. Menke no.: 67134. More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.732,20 €1.431,57
VICTOR REINZ Cylinder head gasket 2 bores engine BF4L1012 Deutz-Fahr, Fendt
€88,01 €72,74 €80,97 €66,92
You save 8%
Filler cap for expansion tank, thread 48 mm
Version: Thread: 48 mm, For expansion tank. More
Version: Thread: 48 mm, For expansion tank.
€27,58 €22,79
Hose elbow bypass Ø 16 / 22 mm Same, Deutz-Fahr
Inner Ø: 16 / 22 mm. More
Inner Ø: 16 / 22 mm.
€94,04 €77,72 €86,52 €71,50
You save 8%
O-ring 48 x 5 mm SAME, Deutz-Fahr, Lamborghini
Dimensions: 48 x 5 mm. More
Dimensions: 48 x 5 mm.
€4,46 €3,69
Optibelt V-belt engine cooling Fendt, Deutz-Fahr
Glow plug red 12 V, M12 x 1,25 Fendt, SAME, Deutz-Fahr
Version: 12 V, Thread M12 x 1.25. More
Version: 12 V, Thread M12 x 1.25.
€58,02 €47,95 €53,38 €44,11
You save 8%
Cylinder head bolt M12 x 108 mm Fendt, Deutz-Fahr, Lamborghini
Engine types: BF4M1012, BF6M1012, BF4M2012, BF6M2012, TCD2012L04 2V, TCD2012L04 4V, TCD 2012L06 2V, TCD2012L06 V4, TCD3.6L04, TCD4.1L04, TCD6.1L06, TT... More
Engine types: BF4M1012, BF6M1012, BF4M2012, BF6M2012, TCD2012L04 2V, T...
€21,20 €17,52
Cylinder head bolt M12 x 178 mm Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
... More
Engine types: BF4M1012, BF6M1012, BF4M2012, BF6M2012, TCD2012L04 2V, T...
€25,29 €20,90
Stop solenoid switch Deutz-Fahr
€426,39 €352,39 €392,28 €324,20
You save 8%
Crankshaft seal for Ø 74 x 95 x 11 mm Fendt, Deutz-Fahr
€70,82 €58,53 €65,15 €53,85
You save 8%
Injection nozzle Deutz-Fahr Agrotron 80-115, Agroplus 75-100
Type formula: DLLA147P360, 0433171257. Bosch no.: 2580433171257. More
Type formula: DLLA147P360, 0433171257. Bosch no.: 2580433171257.
€55,49 €45,86 €51,05 €42,19
You save 8%
Turbocharger mounting kit Deutz-Fahr Agroplus 75-95, Agrotron 80-100
€153,73 €127,05 €141,43 €116,89
You save 8%
High-pressure pump Fendt, Deutz-Fahr
€545,98 €451,22 €502,30 €415,13
You save 8%
Injection line Fendt, Deutz-Fahr
€54,99 €45,45 €50,59 €41,81
You save 8%
Holder for operating cable Deutz-Fahr Agrotron
€47,53 €39,28 €43,73 €36,14
You save 8%
Handle Deutz-Fahr Series 5600-6095HTS, Agrotron 4.70-260
€261,49 €216,11 €240,57 €198,82
You save 8%
Mounting bracket force sensor pin Deutz-Fahr, Lamborghini
€85,61 €70,75 €78,76 €65,09
You save 8%
HELLA Replacement cover orange with optics, test mark E4 6509 ECE
HELLA
Colour: Yellow. Test mark: E4 6509, ECE, K 18614. Additional information: • With pattern. More
Colour: Yellow. Test mark: E4 6509, ECE, K 18614. Additional informati...
€44,07 €36,42 €42,43 €35,07
You save 4%
HELLA Work lamp flood beam H3, 65 W, 12/24 V, 112 x 127 x 97 mm
HELLA
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 112 x 127 x 97 mm. Light function: Close-range illumination. Connection: AMP plug. Bul... More
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 112 x ...
€59,22 €48,94 €57,02 €47,13
You save 4%
HELLA Cable set AMP connection 2-pin, 2000 mm
HELLA
Version: Connection cable 2000 mm for AMP plug connection, with protective cap. More
Version: Connection cable 2000 mm for AMP plug connection, with protec...
€26,04 €21,52
PROBOSS Tractor seat AS3520 air suspended fabric 12 V, seat width 520 mm
PROBOSS
Air suspension with 12V compressor. Fore/aft isolator. Height adjustment. Longitudinal adjustment. Backrest tilt adjustment. Lumbar support. Adjustabl... More
Air suspension with 12V compressor. Fore/aft isolator. Height adjustme...
€1.295,09 €1.070,32
Master brake cylinder piston Ø 23,81 mm mineral oil SAME, Deutz-Fahr
Hole Ø: 23.81 mm. Medium: Mineral oil. More
Hole Ø: 23.81 mm. Medium: Mineral oil.
€428,90 €354,46 €394,59 €326,11
You save 8%
Oil seal drive shaft SAME, Hürlimann, Deutz-Fahr, Lamborghini
€132,96 €109,88 €122,32 €101,09
You save 8%
Brake disc Ø 241 mm, thickness 4,85 mm, 28 teeth, version Sirmac
Hand brake cable 900 mm, M12 SAME, Hürlimann, Deutz-Fahr, Lamborghini
Length: 900 mm. Thread: M12. Dimensions: Length: 900 mm, Thread M12. More
Length: 900 mm. Thread: M12. Dimensions: Length: 900 mm, Thread M12.
€267,43 €221,02 €246,04 €203,34
You save 8%
KS Connecting rod bearing Ø 58 mm, width 26,6 mm Fendt, Deutz-Fahr
KS
Dimensions: Ø 58 mm, Width 26.6 mm. More
Dimensions: Ø 58 mm, Width 26.6 mm.
€34,80 €28,76
VICTOR REINZ Exhaust manifold gasket
€6,60 €5,45
Feed pump 2 hole, hole spacing horizontal 78 mm, pulley Ø 102 mm
Version: 2 holes, Horizontal hole spacing: 78 mm, Centrifugal pump, pulley Ø 102 mm. To fit: Deutz, Lamborghini, Same. More
Version: 2 holes, Horizontal hole spacing: 78 mm, Centrifugal pump, pu...
€98,13 €81,10 €90,28 €74,61
You save 8%
Door lock, left Deutz-Fahr Agrotron 4.70-260, Lamborghini
€186,24 €153,92 €171,34 €141,60
You save 8%
Stabilizer Lamborghini, Hürlimann, Same, Deutz-Fahr
€251,01 €207,45 €230,93 €190,85
You save 8%
Replacement glass 300 x 214 x 3 mm, can be heated, right / left, 12 V
Dimensions: 300 x 214 x 3 mm. Version: Can be heated. Installation location: Right/left. Volts: 12. Radius of curvature: 1800 mm. More
Dimensions: 300 x 214 x 3 mm. Version: Can be heated. Installation loc...
€70,08 €57,92 €64,47 €53,28
You save 8%
Showing 145 - 192 of 211

Deutz-Fahr Agrotron 85 MK3 parts and engine gaskets

When a Deutz-Fahr Agrotron 85 MK3 starts weeping oil around the valve cover or the front cover, fresh gaskets now save a bigger mess later. For the engine in this tractor there are cylinder head gaskets, valve cover gaskets and a front cover gasket, with VICTOR REINZ and Elring among the makers. In all, more than 200 parts fit the Agrotron 85 MK3, and they go well beyond the engine bay.

Fitting a valve cover gasket that stays dry

Most repeat leaks at the valve cover are caused during tightening. Clean the cover and the head face until both are dry and clean, lay the new gasket in without sealant unless the maker asks for it, and bring the bolts down in a cross pattern in small steps. Overtightening distorts the cover and a new gasket will leak just like the old one. For a head gasket, follow the tightening sequence in the workshop manual and check the head for flatness first.

Beyond the engine

  • Hydraulic pump seals and a starter motor.
  • Ball joints for the front axle steering.
  • HELLA work lamps, including flood beams, plus rocker switches for the driving lights.
  • Roof window gas struts, wide-angle mirrors and windscreen symbols.
  • Air suspended tractor seats, PROBOSS among them.
  • Drawbar hitches and Piton Fix parts from ROCKINGER and GRANIT.

Tracking down steering play

If the steering feels vague, have someone rock the wheel from side to side while you hold each ball joint. A joint that knocks or moves before the wheel follows is worn. Ideally replace the joints on the same rod together, secure the nut with a new split pin and have the toe-in reset afterwards, or the front tyres will wear unevenly.

Confirming the fit

Check the type plate to be sure it is an Agrotron 85 MK3, as the models in this range look alike from the outside. For gaskets the engine type is what counts, and it is worth reading the plate on the engine block as well. For ball joints, switches and lamps, compare the number on the part you removed. Clean it first, since stamped numbers disappear quickly under dirt and oil.

The larger models in the MK3 line each have their own page with the parts for that model alone:

For any other tractor from the brand, go to Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart