Menu
EUR

Deutz-Fahr Agrotron 85 tractor parts & technical data

Find the right part for the Deutz-Fahr Agrotron 85 among more than 200 items for the Agrotron series, such as trailer couplings, lighting and electrics.

243 parts found for Deutz-Fahr Agrotron 85
Show:
Symbol differential lock green Deutz-Fahr Agrotron 4.70 - 260
Version: Green, differential lock More
Version: Green, differential lock
€6,96 €5,75
Push button switch PTO shaft 48 V, button yellow, Ø 30 mm Agrotron
Version: 48 V switching voltage Yellow button, make contact Total button travel: 5 mm Ø 30 mm, plug connection (AMP Superseal 3 x 1.5), dustproof and... More
Version: 48 V switching voltage Yellow button, make contact Total butt...
€39,70 €32,81
FEBI Axial joint 210 mm, Ø 56 mm, M22 x 1,5 / M24 x 1,5
€156,85 €129,63 €52,58 €43,45
You save 66%
BOSCH Gear reduction starter 12 V, 3,0 kW, 9 teeth, Ø 89 mm, flange 31 mm
€512,28 €423,37 €493,38 €407,75
You save 4%
Force sensor pin 60 kN, 160 mm, Ø 36,8 mm Deutz-Fahr, Lamborghini
Length: 160 mm. Ø: 36,8 mm. Dimensions: Length = 160, Ø = 36.8 mm. More
Length: 160 mm. Ø: 36,8 mm. Dimensions: Length = 160, Ø = 36.8 mm.
€374,78 €309,74 €344,80 €284,96
You save 8%
Lifting strut complete 710 - 800 mm, M36 x 3 Steyr, Deutz-Fahr
Dimensions: Length = 710 - 800, Ball joint Ø = 25.4, Clevis Ø = 28, Clevis width = 31, Thread = M36 x 3 mm. Reference no.: 1-32-574-020. Menke no.: ... More
Dimensions: Length = 710 - 800, Ball joint Ø = 25.4, Clevis Ø = 28, ...
€313,06 €258,73 €288,02 €238,03
You save 8%
Sauermann Drawbar ball 80, rail width 320 mm, guide 19 mm, 3000 kg
Sauermann
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load capacity: 3000 kg. Colour: Black. D-value: 92 kN. Version: Pivot bolt. Lock: ball... More
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load c...
€1.594,08 €1.317,42 €1.516,55 €1.253,35
You save 5%
SACHS Single clutch Deutz-Fahr Agrotron 4.70 - 6.20, 80 - 115
€498,22 €411,75 €458,36 €378,81
You save 8%
GRAMMER Tractor seat Maximo Professional air suspended 530 mm
GRAMMER
Track gauge (mm): 260 | Rückenverlängerung: Yes | Lordosenstütze: Mechanical | Seat contact switch: Yes | Upholstery type: Fabric | Armrest: Yes | ... More
Track gauge (mm): 260 | Rückenverlängerung: Yes | Lordosenstütze: M...
€3.612,71 €2.985,71
AKS-Dasis Condenser 310 x 580 x 22 mm Deutz-Fahr Agrotron
AKS-Dasis
Equipment: Soldered cooling fins | Length (mm): 310 | Width (mm): 580 | Height (mm): 22 | Weight (g): 3.000 More
Equipment: Soldered cooling fins | Length (mm): 310 | Width (mm): 580 ...
€802,20 €662,98 €738,02 €609,94
You save 8%
Filter dryers airco 162 mm, #6 3/8 o-ring, M Deutz-Fahr
Length (mm): 162 | Thread: #6 3/8 O-Ring | Weight (g): 900 | Connection thread: M More
Length (mm): 162 | Thread: #6 3/8 O-Ring | Weight (g): 900 | Connectio...
€66,06 €54,60 €60,78 €50,23
You save 8%
LUK Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
LUK
Dimensions (mm): 20 x 52 x 15 More
Dimensions (mm): 20 x 52 x 15
€35,51 €29,35 €32,67 €27,00
You save 8%
Elring Valve cover gasket engine BF4M1012, BF4M1012C, BF4M1012E, BF4M1012EC
€37,32 €30,84 €34,33 €28,38
You save 8%
Elring Cylinder head gasket 1,6 mm, 3 hole engine BF4M1012
Elring
Thickness (mm): 1,6 More
Thickness (mm): 1,6
€88,18 €72,88 €81,13 €67,05
You save 8%
Elring Cylinder head gasket 1,5 mm, 2 bores engine BF4M1012
Elring
Thickness (mm): 1,5 More
Thickness (mm): 1,5
€69,99 €57,84 €64,39 €53,22
You save 8%
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
Version: Ø 393/364 mm, 129 teeth. More
Version: Ø 393/364 mm, 129 teeth.
€82,99 €68,59 €76,35 €63,10
You save 8%
ROCKINGER Piton Fix hole pattern 160 x 100 mm, bore M21, 3000 kg, 98,1 kN
ROCKINGER
Lock: Piton Fix. Hole pattern: 160 x 100 mm. Load capacity: 3000 kg. D-value: 98,1 kN. Hole: M21 mm. No. of holes: 4. Colour: Black. More
Lock: Piton Fix. Hole pattern: 160 x 100 mm. Load capacity: 3000 kg. D...
€1.126,27 €930,80 €867,77 €717,17
You save 23%
Radiator copper with frame Deutz-Fahr Agrotron 80-150, 4.70-6.45
To fit as: Deutz-Fahr Series Agrotron: 80–120, 135, 150; Series Agrotron 4.xx: 4.70–4.95; Series Agrotron 6.xx: 6.00–6.45; Series Agrotron MK3: ... More
To fit as: Deutz-Fahr Series Agrotron: 80–120, 135, 150; Series Agro...
€868,43 €717,71 €798,96 €660,29
You save 8%
O-ring water pump 80 x 3 mm SAME, Hürlimann, Deutz-Fahr, Lamborghini
€4,15 €3,43
Thrust washer set standard Deutz-Fahr
Engine types: BF4M1012, BF4M1012C/E/EC, BF6M1012, BF6M1012C/E/EC. More
Engine types: BF4M1012, BF4M1012C/E/EC, BF6M1012, BF6M1012C/E/EC.
€45,52 €37,62 €41,88 €34,61
You save 8%
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Sauermann
Supplied with individual certification Ø 30 mm pin More
Supplied with individual certification Ø 30 mm pin
€1.119,87 €925,51 €1.030,28 €851,47
You save 8%
End plate steering valve 210 bar, 140 x 40 x 104 mm
Description: Diese Endsektion ist zum Abschluss einer Wegeventilkombination erforderlich. Die Endsektion ist mit vier Bohrungen zur Befestigung des We... More
Description: Diese Endsektion ist zum Abschluss einer Wegeventilkombin...
€363,63 €300,52 €334,54 €276,48
You save 8%
FTE Clutch master cylinder mineral oil, gray cast iron, with piston rod
FTE
Medium: Mineral oil | Additional information: With piston rod | Material: Grey cast iron More
Medium: Mineral oil | Additional information: With piston rod | Materi...
€331,90 €274,30 €305,35 €252,35
You save 8%
Sealing ring Deutz-Fahr Agrotron 4.70 - 165, K 90 - 610
€74,44 €61,52 €68,48 €56,60
You save 8%
Aircon compressor 12 V, pulley-Ø 148 mm, 2 grooves
Fixing: EM | Reference no.: 4558FK 351130101, QP7H15-8091 | Refrigerant: R 134a | Cylinder capacity (cm³): 155 | Connection type: 7/8"", 3/4"" | Pull... More
Fixing: EM | Reference no.: 4558FK 351130101, QP7H15-8091 | Refrigeran...
€407,02 €336,38 €374,46 €309,47
You save 8%
FEBI Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
FEBI
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95 More
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95
€115,03 €95,07 €98,75 €81,61
You save 14%
HELLA Starter motor 12 V, 3,7 kW, 9 teeth, Ø 89 mm, clockwise
€683,49 €564,87 €526,61 €435,22
You save 23%
VICTOR REINZ Cylinder head gasket 3 bores engine BF4L1012
€93,49 €77,26 €86,01 €71,08
You save 8%
Stop solenoid switch 12 V Deutz-Fahr, Fendt
€568,79 €470,07 €523,29 €432,47
You save 8%
Silencer 4 cylinder 820 mm, inner-Ø upper 72 mm, side 76 mm
Version: 4-cylinder, Length = 820 mm, Inner Ø top = 72 mm, Inner Ø side = 76 mm. More
Version: 4-cylinder, Length = 820 mm, Inner Ø top = 72 mm, Inner Ø s...
€933,73 €771,68 €859,03 €709,94
You save 8%
Bolt set 1ste steering valve 3x M8 x 90
Technical data: 3x M8 x 90. More
Technical data: 3x M8 x 90.
€18,40 €15,21
Mirror set left, length 440 - 670 mm Renault, Deutz-Fahr, Claas
Length: 440 - 670 mm. Installation location: Left. More
Length: 440 - 670 mm. Installation location: Left.
€170,81 €141,17 €157,15 €129,87
You save 8%
Mirror 314 x 228 mm, heated, 12 V, right / left
Dimensions: 314 x 228 mm. Height: 314 mm. Width: 228 mm. Radius of curvature: 1800 mm. Version: Heated. Operating voltage: 12 V. Installation location... More
Dimensions: 314 x 228 mm. Height: 314 mm. Width: 228 mm. Radius of cur...
€267,55 €221,12 €246,15 €203,43
You save 8%
HELLA Inserts work lamp square 83 x 83 mm, H3, 12 / 24 V, 55 W
HELLA
Bulb: Halogen, H3. Form: Square. Nominal voltage: 12 / 24 V. Power consumption: 55 W. Type: Halogen. Light function: Close-range illumination. Additio... More
Bulb: Halogen, H3. Form: Square. Nominal voltage: 12 / 24 V. Power con...
€56,19 €46,44 €54,11 €44,72
You save 4%
Ball joint 340 mm, M22 x 1,5, M24 x 1,5, taper 24,6 - 28,5 mm
A: 340 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. Taper: 24,6 - 28,5 mm. More
A: 340 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. T...
€195,29 €161,40 €179,67 €148,49
You save 8%
Bolt set 2de steering valve 3x M8 x 130
Technical data: 3x M8 x 130. Description: For 1st Control unit. More
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€15,63 €12,91
Gas strut steering column adjustment 400 N, 200 mm, stroke 30 mm
suitable for: Lenksäulenverstellung. Newtons: 400. A: 200 mm. B: 130 mm. C: 10 mm. D: 10 mm. Form: 8. d1: 10 mm. d2: 28 mm. Stroke: 30 mm. To fit: St... More
suitable for: Lenksäulenverstellung. Newtons: 400. A: 200 mm. B: 130 ...
€84,67 €69,98 €77,90 €64,38
You save 8%
Lift rod 630 - 690 mm, ball joint Ø 25,4 mm, M27 x 2 Deutz-Fahr
Dimensions: Length = 630 - 690, Ball joint Ø = 25.4, Clevis Ø = 25, Clevis width = 27, Thread = M27 x 2 mm. More
Dimensions: Length = 630 - 690, Ball joint Ø = 25.4, Clevis Ø = 25, ...
€376,14 €310,86 €346,05 €285,99
You save 8%
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
ROCKINGER
Colour: Black. Description: Entire coupling body and bearing forged, Easy height adjustment thanks to the use of sliding blocks, Cylindrical hitch bol... More
Colour: Black. Description: Entire coupling body and bearing forged, E...
€1.126,27 €930,80 €867,77 €717,17
You save 23%
Loctite / Teroson Glass kit BOND 120 black - 310 ml cartridge
Loctite / Teroson
Colour: Black. Description: TEROSON® BOND 120 is a high-performance glass adhesive with a safe drive away time of 2 hours. Our new product is the per... More
Colour: Black. Description: TEROSON® BOND 120 is a high-performance g...
€29,49 €24,37
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.664,08 €1.375,27 €1.315,63 €1.087,30
You save 21%
Showing 49 - 96 of 243

Deutz-Fahr Agrotron 85 parts

Head gasket, roof hatch strut or a new drawbar: these are the jobs that tend to come up on an Agrotron 85. This page carries more than 200 parts that fit the model, from GRANIT and from established suppliers such as HELLA, ROCKINGER, VICTOR REINZ and Elring.

Cab comfort and visibility

Gas struts hold the roof hatch and other panels open on the Agrotron 85. If the hatch creeps shut on its own, the strut has lost its charge. Where there are two struts, replace them as a pair so both sides push equally. You will also find wide-angle mirrors, work lamps, rocker switches for the lighting and symbol stickers for the windscreen and controls.

Engine overhaul parts

Taking the engine apart calls for a cylinder head gasket, a valve cover gasket and often the front cover gasket too. There is also a separate seal for the hydraulic pump. Before reassembly, check the workshop manual to see whether the head bolts may be reused. On many engines they are stretch bolts that must be replaced after one tightening. Torque the head down in stages and in the specified sequence, otherwise it can distort and the new gasket will fail anyway. Bolt sets are listed on this page as well.

V-belts for the engine cooling drive and starter motors complete the engine side. A belt with glazed, shiny flanks will slip even when the tension seems right.

Hitch and steering

Drawbars and Piton Fix hitches cover the rear, and ball joints the front axle steering. With a new drawbar, make sure the locking pin drops in cleanly before the first trailer goes on. Play in a ball joint shows up as wandering on the road. Have someone rock the steering wheel while you watch the joint, and any movement will be obvious straight away.

Finding the right part and related Agrotrons

The serial plate comes first, as the Agrotron range includes many different models. After that, the reference number on the old part is your best guide. On gaskets it is often stamped right into the material. The Agrotron 90 and Agrotron 105 also belong to this range. The models below have their own pages with matching parts.

Other tractors from the brand can be found under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart