Menu
EUR

Deutz-Fahr Agrotron 85 tractor parts & technical data

Find the right part for the Deutz-Fahr Agrotron 85 among more than 200 items for the Agrotron series, such as trailer couplings, lighting and electrics.

243 parts found for Deutz-Fahr Agrotron 85
Show:
FEBI Axial joint 210 mm, Ø 56 mm, M22 x 1,5 / M24 x 1,5
€156,85 €129,63 €52,58 €43,45
You save 66%
Gaiter for brake linkage foot brake
€65,94 €54,50 €62,60 €51,74
You save 5%
GRANIT Brake disc steel Ø 227 mm, knott version
€49,17 €40,64 €46,70 €38,60
You save 5%
Internal plate powershift 1,5 mm thick, inner 70,7 mm, outer 110,9 mm
Version: Thickness: 1.5 mm, Inner: 70.7 mm, Outer: 110.9 mm, 36 teeth. More
Version: Thickness: 1.5 mm, Inner: 70.7 mm, Outer: 110.9 mm, 36 teeth.
€12,85 €10,62
VICTOR REINZ Cylinder head gasket 3 bores engine BF4L1012
€89,59 €74,04 €85,10 €70,33
You save 5%
GRANIT Filler cap for expansion tank, thread 48 mm
GRANIT
Version: Thread: 48 mm, For expansion tank. More
Version: Thread: 48 mm, For expansion tank.
€26,40 €21,82
GRANIT Thermostat Ø 42 mm Deutz-Fahr Agroplus 75-100, Agrotron 4.70-115
€84,71 €70,01 €80,45 €66,49
You save 5%
O-ring 48 x 5 mm SAME, Deutz-Fahr, Lamborghini
Dimensions: 48 x 5 mm. More
Dimensions: 48 x 5 mm.
€4,28 €3,54
GRANIT Glow plug red 12 V, M12 x 1,25 Fendt, SAME, Deutz-Fahr
GRANIT
Version: 12 V, Thread M12 x 1.25. More
Version: 12 V, Thread M12 x 1.25.
€55,60 €45,95 €52,80 €43,64
You save 5%
GRANIT Sealing ring for injection nozzle Ø 13 x 7,3 mm, 1,5 mm thick, copper
GRANIT
Outer Ø: 13 mm. Form: A form. Inner Ø: 7,3 mm. Material: copper. Thickness: 1,5 mm. More
Outer Ø: 13 mm. Form: A form. Inner Ø: 7,3 mm. Material: copper. Thi...
€0,72 €0,60
Silencer 4 cylinder 820 mm, inner-Ø upper 72 mm, side 76 mm
Version: 4-cylinder, Length = 820 mm, Inner Ø top = 72 mm, Inner Ø side = 76 mm. More
Version: 4-cylinder, Length = 820 mm, Inner Ø top = 72 mm, Inner Ø s...
€894,81 €739,51 €850,00 €702,48
You save 5%
GRANIT Inlet valve engine Deutz-Fahr Agroplus 75-100, Agrotron 4.70-115
€37,80 €31,24 €35,90 €29,67
You save 5%
GRANIT Door lock, left Deutz-Fahr Agrotron 4.70-260, Lamborghini
€178,48 €147,50 €169,50 €140,08
You save 5%
Mirror set left, length 440 - 670 mm Renault, Deutz-Fahr, Claas
Length: 440 - 670 mm. Installation location: Left. More
Length: 440 - 670 mm. Installation location: Left.
€171,87 €142,04 €155,50 €128,51
You save 10%
Showing 145 - 168 of 243

Deutz-Fahr Agrotron 85 parts

Head gasket, roof hatch strut or a new drawbar: these are the jobs that tend to come up on an Agrotron 85. This page carries more than 200 parts that fit the model, from GRANIT and from established suppliers such as HELLA, ROCKINGER, VICTOR REINZ and Elring.

Cab comfort and visibility

Gas struts hold the roof hatch and other panels open on the Agrotron 85. If the hatch creeps shut on its own, the strut has lost its charge. Where there are two struts, replace them as a pair so both sides push equally. You will also find wide-angle mirrors, work lamps, rocker switches for the lighting and symbol stickers for the windscreen and controls.

Engine overhaul parts

Taking the engine apart calls for a cylinder head gasket, a valve cover gasket and often the front cover gasket too. There is also a separate seal for the hydraulic pump. Before reassembly, check the workshop manual to see whether the head bolts may be reused. On many engines they are stretch bolts that must be replaced after one tightening. Torque the head down in stages and in the specified sequence, otherwise it can distort and the new gasket will fail anyway. Bolt sets are listed on this page as well.

V-belts for the engine cooling drive and starter motors complete the engine side. A belt with glazed, shiny flanks will slip even when the tension seems right.

Hitch and steering

Drawbars and Piton Fix hitches cover the rear, and ball joints the front axle steering. With a new drawbar, make sure the locking pin drops in cleanly before the first trailer goes on. Play in a ball joint shows up as wandering on the road. Have someone rock the steering wheel while you watch the joint, and any movement will be obvious straight away.

Finding the right part and related Agrotrons

The serial plate comes first, as the Agrotron range includes many different models. After that, the reference number on the old part is your best guide. On gaskets it is often stamped right into the material. The Agrotron 90 and Agrotron 105 also belong to this range. The models below have their own pages with matching parts.

Other tractors from the brand can be found under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart