Menu
EUR

Deutz-Fahr Agrotron 90 tractor parts & technical data

Keep the Deutz-Fahr Agrotron 90 going with the right parts: more than 200 items for this Agrotron model are listed here, such as lighting and electrics.

245 parts found for Deutz-Fahr Agrotron 90
Show:
Crankshaft seal for Ø 74 x 95 x 11 mm Fendt, Deutz-Fahr
€67,87 €56,09 €64,45 €53,26
You save 5%
Cylinder head gasket 1,6 mm, 3 bores engine BF4M1012
€71,52 €59,11 €67,90 €56,12
You save 5%
Thermag nut exhaust manifold M8, height 8,5 mm Deutz FL712, FL812
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8.5 mm. More
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8....
€1,21 €1,00
GRANIT High-pressure pump Fendt, Deutz-Fahr
€523,22 €432,41 €497,00 €410,74
You save 5%
GRANIT Handle Deutz-Fahr Series 5600-6095HTS, Agrotron 4.70-260
€250,59 €207,10 €238,00 €196,69
You save 5%
GRANIT Mounting bracket force sensor pin Deutz-Fahr, Lamborghini
€82,04 €67,80 €77,90 €64,38
You save 5%
GRANIT Indicator/position light rectangular red P21W, R5W left
GRANIT
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Red, white. Form: Rectangular. Installation location: Left. Nominal voltage: 12 V. Type: Bulb. Mounting ty... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Red, white. Form: Rectangu...
€360,00 €297,52
Centa Elastic clutch 2x 4 bores, size 28 Deutz-Fahr Agrotron
Centa
Version: 2x 4 holes Size 28 More
Version: 2x 4 holes Size 28
€819,36 €677,16 €741,30 €612,64
You save 10%
AKS-Dasis Condenser 310 x 580 x 22 mm Deutz-Fahr Agrotron
AKS-Dasis
Equipment: Soldered cooling fins | Length (mm): 310 | Width (mm): 580 | Height (mm): 22 | Weight (g): 3.000 More
Equipment: Soldered cooling fins | Length (mm): 310 | Width (mm): 580 ...
€768,76 €635,34 €730,30 €603,55
You save 5%
LUK Single clutch 330TBFR Deutz-Fahr Agrotron 4.70 - 6.20, 80 - 115
€351,32 €290,35 €333,75 €275,83
You save 5%
HELLA Alternator CA1433IR 14 V / 95 A without belt pulley
HELLA
Charging current (A): 95 | Nominal voltage (V): 14 | Additional information: Without pulley | Nominal values (V / A): 14 / 95 More
Charging current (A): 95 | Nominal voltage (V): 14 | Additional inform...
€507,13 €419,12 €388,30 €320,91
You save 23%
GRANIT Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Lamborghini
GRANIT
Dimensions (mm): 20 x 52 x 15 More
Dimensions (mm): 20 x 52 x 15
€11,15 €9,21
GRANIT Thrust bearing driving clutch closed version 65 x 97 x 23 mm
GRANIT
Dimensions (mm): 65 x 97 x 23 More
Dimensions (mm): 65 x 97 x 23
€79,10 €65,37 €75,10 €62,07
You save 5%
FEBI Cab filter for C55102 and AF26108
€40,38 €33,37 €11,43 €9,45
You save 72%
Ball joint 340 mm, M22 x 1,5, M24 x 1,5, taper 24,6 - 28,5 mm
A: 340 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. Taper: 24,6 - 28,5 mm. More
A: 340 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. T...
€187,15 €154,67 €177,75 €146,90
You save 5%
LUK Pilot bearing 20 x 52 x 15 mm
LUK
Dimensions: 20 x 52 x 15 mm. More
Dimensions: 20 x 52 x 15 mm.
€34,18 €28,25 €32,45 €26,82
You save 5%
Shim foot brake 3 mm thick Deutz Agrotron 6120.4-6160.4
€60,44 €49,95 €57,40 €47,44
You save 5%
GRANIT Brake disc Ø 241 mm, thickness 4,85 mm, 28 teeth, version Sirmac
€65,62 €54,23 €62,30 €51,49
You save 5%
External plate AV35 powershift 2,2 mm, inner 77,3 mm, 30 teeth
Version: Thickness: 2.2 mm, Inner: 77.3 mm, Outer: 118.3 mm, 30 teeth. More
Version: Thickness: 2.2 mm, Inner: 77.3 mm, Outer: 118.3 mm, 30 teeth.
€34,50 €28,51 €32,75 €27,07
You save 5%
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Lock: KS80. Menke no.: 67134. More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.682,20 €1.390,25
KS Piston set complete Ø 94 mm, piston pin Ø 34 mm, dry cylinder liner
KS
Dimensions: 3 rings, Ø 94 mm, gudgeon pin Ø 34 x 78 mm, combustion chamber Ø 49.5 mm, combustion chamber depth 18.4 mm, ring carrier piston, dry li... More
Dimensions: 3 rings, Ø 94 mm, gudgeon pin Ø 34 x 78 mm, combustion c...
€462,28 €382,05 €439,15 €362,93
You save 5%
Showing 97 - 120 of 245

Deutz-Fahr Agrotron 90 parts from engine to cab

More than 200 replacement parts that fit the Deutz-Fahr Agrotron 90 are gathered on this page. They come from GRANIT, HELLA, ROCKINGER, VICTOR REINZ, Elring and other makers.

Engine gaskets and belts

Oil seeping from the top of the engine or a slow coolant loss usually points to a gasket. For the Agrotron 90 there are cylinder head gaskets, valve cover gaskets and gaskets for the front cover, along with seals for the hydraulic pump and the V-belt that drives the engine cooling.

When you replace a valve cover gasket, clean both faces thoroughly and tighten the bolts evenly in a crosswise pattern. Overtightening distorts the cover, and a distorted cover will leak again even with a new gasket.

Steering and hitch

Ball joints for the steering and stabilizers for the linkage are listed here. Play in a ball joint shows up as a vague, wandering feel on the road. After replacing one, have the toe-in checked so the front tyres wear evenly. At the rear there are drawbars and ROCKINGER Piton Fix hitches.

On a Piton Fix, test the locking pin and its spring at every service. If the pin no longer snaps home by itself, replace it now rather than next season.

Cab, lights and switches

A roof window that no longer stays open is a small irritation on a hot day, and a new gas strut fixes it in minutes. Wide-angle mirrors and windscreen symbols are here as well, plus flood beam work lamps and rocker switches for the dashboard, such as the one for the driving lights.

When fitting a new windscreen symbol, degrease the glass first and smooth the sticker from the centre outwards so no air bubbles stay behind. With a wide-angle mirror, check the mirror arm as well. A loose arm makes even a new mirror shake, and a shaking mirror is of little use on a busy road.

Finding the right part

Check the type plate to be sure you are dealing with an Agrotron 90. With the old part removed, look for the reference number on it and compare it with the parts on this page. For ball joints and mirrors, also note if the left or the right one is needed.

The Agrotron 90 is one of the Agrotron range. Other models in that range have a page of their own:

To browse every Deutz-Fahr type, use the Deutz-Fahr parts overview.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart