More than 180 parts fit the Deutz-Fahr Agrotron K 100 of the Agrotron K series, from trailer couplings and engine parts to steering and front axle.
A weeping valve cover gasket, a squealing air conditioning belt or a ball joint with play: these are the jobs an Agrotron K 100 asks for after years of steady work. This page holds more than 180 parts for this tractor, from GRANIT, Walterscheid, ROCKINGER, GRAMMER and HELLA.
For the engine there are valve cover gaskets, front cover gaskets, air conditioning V-belts, multi-rib belts and starter motors, along with seals for the hydraulic pump. When renewing a valve cover gasket, clean both the cover and the sealing face on the cylinder head until no trace of oil remains, then tighten the bolts evenly in a crosswise pattern. Overtightening distorts the cover, and the new gasket will leak just as quickly as the old one. Before fitting a new belt, check the tensioner and pulleys: a roller that rumbles or has play will ruin a fresh belt in no time. If the starter motor only clicks, measure the battery voltage and inspect the earth cable before replacing it.
For the front axle there are complete ball joints. Play is easiest to check with two people: one rocks the steering wheel back and forth with the engine running, the other holds a hand around the joint. If you feel a knock or movement before the wheel responds, the joint is due. Secure a new ball joint with a new locking nut or split pin and have the toe-in checked afterwards, otherwise the front tyres will wear unevenly.
In the cab, gas struts for the roof window and new seats such as the PROBOSS or a GRAMMER Maximo Professional make a real difference. For light around the tractor there are flood beam work lamps. At the rear you can choose from drawbars, including automatic versions, Piton Fix hitches and height-adjustable adapter plates. Measure the rail width and pin diameter on the existing frame so the new drawbar fits your rail.
The type plate on the tractor confirms that you are working on an Agrotron K 100. With the old part in your hand, the number on it is the quickest check, especially for belts and gaskets where small differences count. The Deutz-Fahr Agrotron K 90, Deutz-Fahr Agrotron K 110 and Deutz-Fahr Agrotron K 120 from the same Agrotron K range have their own pages too, which is handy if several of these tractors run on your farm. An overview of every Deutz-Fahr model is under Deutz-Fahr parts.
