Menu
EUR

Deutz-Fahr Agrotron K 120 tractor parts & technical data

We have gathered more than 180 parts for the Deutz-Fahr Agrotron K 120 by model, including trailer couplings, engine parts and electrics for this tractor.

178 parts found for Deutz-Fahr Agrotron K 120
Show:
GRANIT Contact switch safety switch Powershift, Syncrosplit
GRANIT
Version: Powershift, Syncrosplit. More
Version: Powershift, Syncrosplit.
€206,43 €170,60 €196,10 €162,07
You save 5%
Optibelt Multi-rib belt Powerband air pressure system 4 ribs Deutz
€30,10 €24,88
GRANIT Internal plate PTO clutch 2 mm, 38 teeth
GRANIT
Version: thickness = 2 mm 38 teeth More
Version: thickness = 2 mm 38 teeth
€42,93 €35,48 €40,75 €33,68
You save 5%
Elring Seal glow plug
€15,00 €12,40
GRAMMER Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VII
GRAMMER
Seat heater: Optional | Length (mm): 631 | Included in delivery: Seat supplied with seat contact switch and bracket for your existing control armrest.... More
Seat heater: Optional | Length (mm): 631 | Included in delivery: Seat ...
€2.082,30 €1.720,91
KS Connecting rod bearing Ø 63 mm, width 29 mm Fendt, Deutz-Fahr
KS
Dimensions: Ø 63 mm, Width 29 mm. More
Dimensions: Ø 63 mm, Width 29 mm.
€38,35 €31,69
GRANIT Cylinder head bolt M12 x 108 mm Fendt, Deutz-Fahr, Lamborghini
GRANIT
Engine types: BF4M1012, BF6M1012, BF4M2012, BF6M2012, TCD2012L04 2V, TCD2012L04 4V, TCD 2012L06 2V, TCD2012L06 V4, TCD3.6L04, TCD4.1L04, TCD6.1L06, TT... More
Engine types: BF4M1012, BF6M1012, BF4M2012, BF6M2012, TCD2012L04 2V, T...
€20,30 €16,78
Cylinder head bolt M12 x 178 mm Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
... More
Engine types: BF4M1012, BF6M1012, BF4M2012, BF6M2012, TCD2012L04 2V, T...
€24,20 €20,00
Main bearing Ø 84 mm Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
€36,08 €29,82 €34,25 €28,31
You save 5%
Showing 169 - 178 of 178

Parts for the Deutz-Fahr Agrotron K 120

Belts, lights and the seat account for a good share of the work on an Agrotron K 120, together with seals on the engine and hydraulics. This page lists more than 180 new parts for the tractor, made by GRANIT, Walterscheid, ROCKINGER, HELLA and Optibelt.

Belt drive and engine

Multi-rib belts and V-belts are listed, among them the V-belt for the air conditioning. On the engine you will also find valve cover gaskets, front cover gaskets, sealing rings and crankshaft seals, plus starter motors.

Changing the multi-rib belt

Take a photo of the belt routing before the old belt comes off, so the new one goes on right first time. Check the pulleys for rust and worn grooves, and spin the tensioner by hand. If it feels rough or makes noise, replace it now. When the air conditioning V-belt sits in front, renew that one at the same time.

Cab, seat and rear

  • seats such as the PROBOSS and tractor seats such as the Maximo Professional
  • adapter plates for the seat console
  • gas struts for the roof window
  • flood beam work lamps
  • seals for the hydraulic pump
  • automatic drawbars and Piton Fix hitches

How to match a part

The serial plate confirms you have an Agrotron K 120. Belts have their length and profile printed on the back, and starters carry a plate with a reference number. For a seat, the mounting decides: an adapter plate lets a new seat sit on the existing console. Compare each with the product details.

Lights, starting and leaks

Flood beam work lamps light a wide area close to the tractor, which is ideal for hitching up or working around the clamp. Mount them as high and as far out as the bracket allows to cut down shadows from the wheels. If the starter turns slowly or only clicks, measure battery voltage while cranking and check the earth cable first. A leaking hydraulic pump shows up as oil collecting along the flange. Clean everything thoroughly before replacing the seal so no grit gets into the pump. A leak at the crankshaft calls for a new crankshaft seal, often together with the front cover gasket.

Agrotron K series

The Deutz-Fahr Agrotron K 90, Deutz-Fahr Agrotron K 100 and Deutz-Fahr Agrotron K 110 each have their own page with the parts for that model, which helps if a smaller K works alongside the 120. For an Agrotron outside the K series, or an older Deutz-Fahr, go through Deutz-Fahr parts and choose the model.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart