Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Deutz-Fahr Agrotron K 410 tractor parts & technical data

Not sure what fits the Deutz-Fahr Agrotron K 410? This page lists more than 160 parts for the Agrotron K, such as trailer couplings, lighting and electrics.

161 parts found for Deutz-Fahr Agrotron K 410
Show:
Feed pump 2 hole, hole spacing horizontal 78 mm, pulley Ø 102 mm
Version: 2 holes, Horizontal hole spacing: 78 mm, Centrifugal pump, pulley Ø 102 mm. To fit: Deutz, Lamborghini, Same. More
Version: 2 holes, Horizontal hole spacing: 78 mm, Centrifugal pump, pu...
€98,13 €81,10 €90,28 €74,61
You save 8%
Heating flange Hürlimann, Deutz-Fahr, Lamborghini
€401,90 €332,15 €369,75 €305,58
You save 8%
Stabilizer Lamborghini, Hürlimann, Same, Deutz-Fahr
€251,01 €207,45 €230,93 €190,85
You save 8%
Push button switch PTO shaft 48 V link voltage, button yellow, Ø 30 mm
Version: 48 V switching voltage, Yellow button, make contact, Total button travel: 5 mm, Ø 30 mm, plug connection (AMP Superseal 3 x 1.5), dustproof ... More
Version: 48 V switching voltage, Yellow button, make contact, Total bu...
€39,02 €32,25 €35,90 €29,67
You save 8%
Gaiter for brake linkage foot brake
€68,06 €56,25 €62,62 €51,75
You save 8%
Shim foot brake 3 mm thick Deutz Agrotron 6120.4-6160.4
€63,07 €52,12 €58,02 €47,95
You save 8%
External plate AV35 powershift 2,2 mm, inner 77,3 mm, 30 teeth
Version: Thickness: 2.2 mm, Inner: 77.3 mm, Outer: 118.3 mm, 30 teeth. More
Version: Thickness: 2.2 mm, Inner: 77.3 mm, Outer: 118.3 mm, 30 teeth.
€36,00 €29,75 €33,12 €27,37
You save 8%
Oil drain valve M18 x 1,5
Thread: M18 x 1.5. More
Thread: M18 x 1.5.
€68,16 €56,33 €62,71 €51,82
You save 8%
Feed pump Lamborghini Mach 200 ST - 250 VRT, R6.100-R6.190
€67,32 €55,64 €61,93 €51,19
You save 8%
Stud bolt exhaust M8 / M10, 72 mm Deutz-Fahr
Version: Thread M8, M10, Length: 72 mm. Thread: M8 / M10. Length: 72 mm. More
Version: Thread M8, M10, Length: 72 mm. Thread: M8 / M10. Length: 72 m...
€24,26 €20,05
Sealing ring for injection nozzle Ø 13 x 7,3 mm, 1,5 mm thick, copper
Outer Ø: 13 mm. Form: A form. Inner Ø: 7,3 mm. Material: copper. Thickness: 1,5 mm. More
Outer Ø: 13 mm. Form: A form. Inner Ø: 7,3 mm. Material: copper. Thi...
€0,76 €0,63
Connecting rod bearing Ø 63 mm
Dimensions: Ø 63 mm. More
Dimensions: Ø 63 mm.
€34,73 €28,70
Contact switch safety switch Powershift, Syncrosplit
Version: Powershift, Syncrosplit. More
Version: Powershift, Syncrosplit.
€215,41 €178,02 €198,18 €163,78
You save 8%
HELLA Reflector rectangular red, 70 x 31,5 mm, thickness 5 mm, bonded
HELLA
Colour: Red. Width: 70 mm. Form: Rectangular. Height: 31.5 mm. Material: Plastic. Material thickness: 5 mm. Fixing: Vertical. Installation location: R... More
Colour: Red. Width: 70 mm. Form: Rectangular. Height: 31.5 mm. Materia...
€2,99 €2,47
Showing 145 - 161 of 161

Deutz-Fahr Agrotron K 410 parts, from the driver's seat outward

A long day on a Deutz-Fahr Agrotron K 410 goes straight to your back when the seat is worn out. That is why this page starts at the operator's platform. Altogether there are more than 160 parts for the K 410 here, from GRANIT, Walterscheid, ROCKINGER, Sauermann and GRAMMER.

Seating, visibility and lighting

There are several seats for the K 410: a PROBOSS seat, a Maximo Professional tractor seat and air suspended tractor seats. An air suspended seat has its own small compressor, so it needs a power supply in the cab. Check that the connection is there and makes good contact before bolting the new seat down. A gas strut for the roof window, flood beam work lamps and LED main headlights complete the cab.

Under the bonnet

  • V-belt for the air conditioning
  • starter motor
  • fuel feed pump
  • valve cover gasket and front gasket
  • hydraulic pump seals and sealing rings

With a valve cover gasket, clean old residue off the cylinder head face without scratching it and tighten the bolts evenly, working from the centre outward. Check an aircon V-belt for fine cracks on the inside, which only show once you twist the belt slightly.

The feed pump comes with a habit that prevents plenty of starting trouble: bleed the fuel system after every filter change until no more air bubbles appear. Air in the line makes the engine crank for a long time before it fires, which puts needless strain on the starter and the battery. If it still starts reluctantly with the system properly bled, look for corrosion on the starter terminals.

Drawbar and Piton Fix

At the rear there are automatic drawbars in AGCO grey and Piton Fix, among others from Walterscheid and ROCKINGER. If you swap between a tipping trailer and a bale cart a lot, a second insert saves effort.

Finding the matching part

The K 410 belongs to the Agrotron K series. The type plate shows that you really are working on a K 410, and a number on the old part makes comparing it with this page straightforward. With seats, also compare how they mount to the floor.

Each other type in the K series has its own page:

Other Deutz-Fahr series can be found through Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart