Menu
EUR

Deutz-Fahr Agrotron TTV 1160 tractor parts & technical data

Looking for Deutz-Fahr Agrotron TTV 1160 spares? Choose from more than 200 items here, including lighting, trailer couplings and electrics for this tractor.

218 parts found for Deutz-Fahr Agrotron TTV 1160
Show:
Lamp glass right, left
Installation location: Right, left. More
Installation location: Right, left.
€40,49 €33,46
Mekra Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
Mekra
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95 More
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95
€46,78 €38,66 €43,04 €35,57
You save 8%
Stabilus Gas strut door screen 750 N, 250 mm, stroke 80,5 mm, ball socket Deutz-Fahr
Stabilus
To fit as: Deutz Door window More
To fit as: Deutz Door window
€37,18 €30,73 €34,21 €28,27
You save 8%
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 148 mm, 2 grooves
SANDEN
Refrigerant: R 134a | No. of grooves: 2 | Fixing: EM | Nominal voltage (V): 12 | For compressor: SD7H15 | Reference no.: SD7H15-8091, 04437338, 044114... More
Refrigerant: R 134a | No. of grooves: 2 | Fixing: EM | Nominal voltage...
€691,85 €571,78 €636,50 €526,03
You save 8%
Filter dryers 228 mm, #6 o-ring, connection thread M
Length (mm): 228 | Thread: #6 O-Ring | Connection thread: M More
Length (mm): 228 | Thread: #6 O-Ring | Connection thread: M
€79,27 €65,51 €72,93 €60,27
You save 8%
MAHLE Starter motor with reduction 12 V, 3,0 kW, 9 teeth, Ø 89 mm, angle l 52
€699,35 €577,98 €418,87 €346,18
You save 40%
Input shaft sealing ring 35 x 92/98 x 12/27 mm Carraro front axle 145706
Thermostat Ø 38/38/38 mm, Deutz-Fahr, Lamborghini, Hürlimann, Same
€275,10 €227,36 €253,09 €209,17
You save 8%
VICTOR REINZ Cylinder head gasket thickness 1,7 mm, 3 bores
€130,83 €108,12 €120,36 €99,47
You save 8%
V-belt set AV 13 x 1600 mm Massey Ferguson, Deutz-Fahr
Dimensions: AV 13 x 1600 mm. More
Dimensions: AV 13 x 1600 mm.
€34,14 €28,21
Oil cooler Deutz-Fahr Agrotron New 150.7-265, engine BF6M1013
€451,30 €372,98 €415,20 €343,14
You save 8%
Turbocharger Deutz-Fahr Agrotron 120-175, TTV 1130-1160
€1.759,76 €1.454,35 €1.686,41 €1.393,73
You save 4%
Cylinder head gasket 1,5 mm Deutz-Fahr Agrotron 100-260
€63,89 €52,80 €58,78 €48,58
You save 8%
Thermag nut exhaust manifold M8, height 8,5 mm Deutz FL712, FL812
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8.5 mm. More
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8....
€1,26 €1,04
Pressure retention valve Deutz-Fahr, Fendt
€35,69 €29,50 €32,83 €27,14
You save 8%
Fan clutch Deutz-Fahr Agrotron 160-200, TTV 1130-1160
€293,26 €242,36 €269,80 €222,97
You save 8%
Bosch/Rexroth Hydraulic pump clockwise 45 cm³/rpm.
Bosch/Rexroth
Output volume: 45 cc/rev. Direction of rotation: Right. More
Output volume: 45 cc/rev. Direction of rotation: Right.
€4.682,85 €3.870,12 €4.308,22 €3.560,51
You save 8%
GRAMMER Tractor seat Maximo Professional Deutz, Deutz-Fahr
GRAMMER
To fit: Deutz VI. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 530 mm. Joystick con... More
To fit: Deutz VI. Suspension: Air suspension. Upholstery type: Fabric....
€2.581,18 €2.133,21
GRAMMER Tractor seat Maximo Evolution Dynamic MSG95EL/741 Deutz VII
GRAMMER
To fit: Deutz VII. Suspension: Air suspension. Upholstery type: Fabric / new design. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 550 mm... More
To fit: Deutz VII. Suspension: Air suspension. Upholstery type: Fabric...
€6.982,37 €5.770,55 €6.473,78 €5.350,23
You save 7%
GRAMMER Tractor seat Maximo Dynamic Plus MSG95AL/741 Deutz VI
GRAMMER
To fit: Deutz VI. Suspension: Air suspension. Upholstery type: Fabric / new design. Seat contact switch: Optional. Track gauge: 260 mm. Seat width: 56... More
To fit: Deutz VI. Suspension: Air suspension. Upholstery type: Fabric ...
€5.340,95 €4.414,01 €4.963,67 €4.102,21
You save 7%
PROBOSS Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
PROBOSS
To fit: Deutz V2. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 520 mm. Joystick con... More
To fit: Deutz V2. Suspension: Air suspension. Upholstery type: Fabric....
€1.905,32 €1.574,64 €1.875,89 €1.550,32
You save 2%
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Description: Ball hitch with com... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.489,09 €1.230,65 €1.197,32 €989,52
You save 20%
Sauermann Ball drawbar ball 80, rail 330 mm, nose weight 3000 kg John Deere
Sauermann
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 31,4 mm. Load capacity: 3000 kg. Colour: Black. D-value: 92 kN. Version: Sliding bolt. Lock: ba... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 31,4 mm. Load c...
€1.587,57 €1.312,04 €1.510,56 €1.248,40
You save 5%
Sauermann Drawbar 31 mm, 330 / 25 / 32 mm, 2000 kg, 97,1 kN
Sauermann
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 32 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Drawbar ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€835,55 €690,54 €768,71 €635,29
You save 8%
Connection cable mirror heating 2-pin, 2000 mm
Dimensions: Length = 2000 mm. To fit: Case IH, Deutz, Fendt, JCB, Same. More
Dimensions: Length = 2000 mm. To fit: Case IH, Deutz, Fendt, JCB, Same...
€36,30 €30,00
Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade terminal 6.3 mm, AF: 24 mm, Colour: white. Connection: Blade terminal... More
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 ...
€27,39 €22,63
Tank sender fuel gauge
Version: Fuel gauge. More
Version: Fuel gauge.
€423,61 €350,09
Push button switch lift/lower 48 V link voltage, button green
Version: 48 V switching voltage, Green button, make contact, Total button travel: 5 mm, Ø 30 mm, plug connection (AMP Superseal 3 x 1.5), dustproof a... More
Version: 48 V switching voltage, Green button, make contact, Total but...
€38,96 €32,20 €35,84 €29,62
You save 8%
HELLA Work lamp flood beam H3 55 / 70 W, 12 / 24 V, 112 x 127 x 97 mm
HELLA
Bulb: H3. Connection: AMP plug. Form: Square. Material: Housing: plastic, lens: glass. Dimensions W x H x D: 112 x 127 x 97 mm. Fixing: Vertical, swiv... More
Bulb: H3. Connection: AMP plug. Form: Square. Material: Housing: plast...
€50,51 €41,74 €48,64 €40,20
You save 4%
Cobo Headlight left / right 12V60/55W / H4, built-in, screw fixing
Cobo
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal voltage: 12 V. Test mark: ECE. Light function: Dipped beam, full beam. Additional in... More
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal volt...
€91,72 €75,80 €84,38 €69,74
You save 8%
Rear light 12 V, R10W, P21W
Nominal voltage: 12 V. Installation location: Left/right. Bulb: 12V10WK / R10W, 12V21WK / P21W. Form: Rectangular, short sides rounded. Type: Bulb. Ad... More
Nominal voltage: 12 V. Installation location: Left/right. Bulb: 12V10W...
€114,68 €94,78
ZF Planetary carrier Ø 318 mm, inner-Ø 209 mm ZF front axle 4475006044
€2.026,06 €1.674,43 €1.863,98 €1.540,48
You save 8%
Ball joint 330 mm, C M22 x 1,5, D M24 x 1,5, taper 24,6 - 28,5 mm
A: 330 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. Taper: 24,6 - 28,5 mm. More
A: 330 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. T...
€187,68 €155,11 €172,67 €142,70
You save 8%
Holder luchtinlaatpijp SAME, Hürlimann, Deutz-Fahr, Lamborghini
€109,43 €90,44 €100,68 €83,20
You save 8%
Fuel cooler SAME, Hürlimann, Deutz-Fahr, Lamborghini
€2.948,71 €2.436,95 €2.712,81 €2.241,99
You save 8%
Radiator hose, top Ø 38 mm, length 90 mm Same, Deutz-Fahr
Inner Ø: 38 mm. Length: 90 mm. More
Inner Ø: 38 mm. Length: 90 mm.
€59,82 €49,44 €55,03 €45,48
You save 8%
Exhaust gasket exhaust manifold inner Ø 39 mm, hole spacing 64 mm
Dimensions: innen Ø 39 mm, Lochabstand 64 mm, Schrauben Ø 10 mm. More
Dimensions: innen Ø 39 mm, Lochabstand 64 mm, Schrauben Ø 10 mm.
€3,80 €3,14
Exhaust manifold gasket to turbo Fendt, SAME, Deutz-Fahr
€35,19 €29,08 €32,37 €26,76
You save 8%
Crankshaft seal rear Ø 130 x 150 x 13 mm FPM FPM
Outer Ø: 150 mm. Width: 13 mm. Inner Ø: 130 mm. Material: FPM (fluoro rubber). More
Outer Ø: 150 mm. Width: 13 mm. Inner Ø: 130 mm. Material: FPM (fluor...
€51,39 €42,47 €47,28 €39,07
You save 8%
Crankshaft seal for Ø 81 x 104 x 11 mm FPM FPM
Outer Ø: 104 mm. Width: 11 mm. Inner Ø: 81 mm. Material: FPM (fluoro rubber). More
Outer Ø: 104 mm. Width: 11 mm. Inner Ø: 81 mm. Material: FPM (fluoro...
€40,83 €33,74 €37,56 €31,04
You save 8%
Tank cap with ventilation and lock, thread Ø 60 / 65 mm, collar Ø 65 mm
Thread Ø mm: 60 / 65. Filler neck Ø: 65 mm. More
Thread Ø mm: 60 / 65. Filler neck Ø: 65 mm.
€37,75 €31,20 €34,73 €28,70
You save 8%
GRAMMER Tractor seat Maximo Dynamic DDS MSG95AL/741 Fendt, Deutz, Deutz-Fahr
GRAMMER
To fit: Deutz VII. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 550 mm. Joystick co... More
To fit: Deutz VII. Suspension: Air suspension. Upholstery type: Fabric...
€3.492,04 €2.885,98
Gas strut 900 N, 785 mm, stroke 350 mm
suitable for: Motorhaube. Newtons: 900. A: 785 mm. B: 390 mm. C: 8 mm. D: 8 mm. Form: 2. d1: 10 mm. d2: 22 mm. Stroke: 350 mm. More
suitable for: Motorhaube. Newtons: 900. A: 785 mm. B: 390 mm. C: 8 mm....
€73,67 €60,88 €67,78 €56,01
You save 8%
Showing 97 - 144 of 218

Deutz-Fahr Agrotron TTV 1160 parts for the operator station and engine

An Agrotron TTV 1160 builds up hours quickly. At that pace a comfortable seat, bright work lamps and an engine that stays oil-tight are not luxuries. This page gathers more than 200 replacement parts for this tractor, from GRANIT, HELLA, GRAMMER, Sauermann and PROBOSS.

Seats and cab

A worn-out seat makes itself felt in your back by the end of the day. You can choose from air-suspended tractor seats, including GRAMMER models, and PROBOSS seats, some of them with a seat heater. The roof window has its own gas struts, and wide-angle mirrors help with the view behind. Work lamps such as flood beams replace a failed or dim light on the cab.

A practical point on air seats: if the seat sinks slowly or the compressor keeps running, check the air hose and its connections for hairline cracks first. A new length of hose often solves it long before a complete seat is needed.

Engine, hydraulics and steering

For the engine there are cylinder head gaskets, a valve cover gasket and air receiver gaskets. A fan clutch and starter motors are part of the picture too. On the hydraulic side you will find hydraulic pumps and seals, and for the steering there are ball joints.

When replacing a head gasket, use new head bolts wherever the workshop manual calls for them and tighten them in the correct sequence and in stages. Clean the mating faces thoroughly and check the head with a straight edge for distortion before the new gasket goes on.

Drawbar and Piton Fix

At the rear there are drawbars and Piton Fix hitches with a locking pin, intended for working with heavy trailers and implements.

  • air-suspended tractor seats
  • work lamps, mirrors and gas struts
  • cylinder head gaskets and a valve cover gasket
  • hydraulic pumps, ball joints and starter motors
  • drawbars and Piton Fix

Finding the part that fits

The type plate on your 1160 shows the exact model and chassis number. For engine components such as a gasket or a starter motor, the number on the old part is a reliable second check. Hold it against the product details.

In the Agrotron TTV line-up the 1160 has two siblings with pages here, the Deutz-Fahr Agrotron TTV 1130 and the Deutz-Fahr Agrotron TTV 1145, each with its own selection. Any other Deutz-Fahr tractor is covered under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart