Menu
EUR

Deutz-Fahr Agrotron TTV 1160 tractor parts & technical data

Looking for Deutz-Fahr Agrotron TTV 1160 spares? Choose from more than 200 items here, including lighting, trailer couplings and electrics for this tractor.

218 parts found for Deutz-Fahr Agrotron TTV 1160
Show:
MAHLE Alternator 14 V, 95 A, fastening 56 / 8,2 / 86 mm
MAHLE
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional information: Dust-tight, with fan | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Cha... More
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional info...
€320,94 €265,24 €200,55 €165,74
You save 38%
Elring Valve cover gasket inlet manifold Deutz engine BF6M1013
€49,38 €40,81 €46,90 €38,76
You save 5%
FEBI Fuel filter Ø 77,5 mm, height 125 mm, M16 x 1,5
€9,76 €8,07 €6,64 €5,49
You save 32%
FEBI Cab filter for C55102 and AF26108
€40,38 €33,37 €11,43 €9,45
You save 72%
Intercooler SAME, Hürlimann, Deutz-Fahr, Lamborghini
€4.196,49 €3.468,17 €3.986,65 €3.294,75
You save 5%
GRANIT Cylinder head gasket 1,6 mm, 2 bores, Deutz-Fahr Agrotron 100-260
€45,29 €37,43 €43,00 €35,54
You save 5%
GRANIT Fuel cooler SAME, Hürlimann, Deutz-Fahr, Lamborghini
€2.825,79 €2.335,36 €2.684,50 €2.218,60
You save 5%
O-ring 48 x 5 mm SAME, Deutz-Fahr, Lamborghini
Dimensions: 48 x 5 mm. More
Dimensions: 48 x 5 mm.
€4,28 €3,54
GRANIT Glow plug red 12 V, M12 x 1,25 Fendt, SAME, Deutz-Fahr
GRANIT
Version: 12 V, Thread M12 x 1.25. More
Version: 12 V, Thread M12 x 1.25.
€55,60 €45,95 €52,80 €43,64
You save 5%
Thrust washer set standard Deutz-Fahr
Engine types: BF4M1013, BF4M1013C, BF4M1013E, BF4M1013, BF6M1013C/CP/E/EC. More
Engine types: BF4M1013, BF4M1013C, BF4M1013E, BF4M1013, BF6M1013C/CP/E...
€36,72 €30,35 €34,85 €28,80
You save 5%
GRANIT Air receiver gasket
€12,40 €10,25
GRANIT Tank cap with ventilation and lock, thread Ø 60 / 65 mm, collar Ø 65 mm
GRANIT
Thread Ø mm: 60 / 65. Filler neck Ø: 65 mm. More
Thread Ø mm: 60 / 65. Filler neck Ø: 65 mm.
€36,18 €29,90 €34,35 €28,39
You save 5%
Feed pump 2 hole, hole spacing horizontal 78 mm, pulley Ø 102 mm
Version: 2 holes, Horizontal hole spacing: 78 mm, Centrifugal pump, pulley Ø 102 mm. To fit: Deutz, Lamborghini, Same. More
Version: 2 holes, Horizontal hole spacing: 78 mm, Centrifugal pump, pu...
€94,04 €77,72 €89,30 €73,80
You save 5%
Bosch/Rexroth Hydraulic pump clockwise 45 cm³/rpm.
Bosch/Rexroth
Output volume: 45 cc/rev. Direction of rotation: Right. More
Output volume: 45 cc/rev. Direction of rotation: Right.
€4.487,64 €3.708,79 €4.263,25 €3.523,35
You save 5%
GRANIT Replacement key plastic-coated black, lock number 14644
GRANIT
Locking number: 14644. Version: Locking no. 14644 <lt>br<gt> To fit: Deutz-Fahr</gt></lt>. More
Locking number: 14644. Version: Locking no. 14644 <lt>br<gt> To fit: D...
€17,70 €14,63
GRANIT Replacement glass 300 x 214 x 3 mm, can be heated, right / left, 12 V
GRANIT
Dimensions: 300 x 214 x 3 mm. Version: Can be heated. Installation location: Right/left. Volts: 12. Radius of curvature: 1800 mm. More
Dimensions: 300 x 214 x 3 mm. Version: Can be heated. Installation loc...
€70,52 €58,28 €63,80 €52,73
You save 10%
Vibration damper SAME, Hürlimann, Deutz-Fahr, Lamborghini
Reference no.: 0.019.0172.0/20. More
Reference no.: 0.019.0172.0/20.
€213,69 €176,60 €203,00 €167,77
You save 5%
Showing 121 - 144 of 218

Deutz-Fahr Agrotron TTV 1160 parts for the operator station and engine

An Agrotron TTV 1160 builds up hours quickly. At that pace a comfortable seat, bright work lamps and an engine that stays oil-tight are not luxuries. This page gathers more than 200 replacement parts for this tractor, from GRANIT, HELLA, GRAMMER, Sauermann and PROBOSS.

Seats and cab

A worn-out seat makes itself felt in your back by the end of the day. You can choose from air-suspended tractor seats, including GRAMMER models, and PROBOSS seats, some of them with a seat heater. The roof window has its own gas struts, and wide-angle mirrors help with the view behind. Work lamps such as flood beams replace a failed or dim light on the cab.

A practical point on air seats: if the seat sinks slowly or the compressor keeps running, check the air hose and its connections for hairline cracks first. A new length of hose often solves it long before a complete seat is needed.

Engine, hydraulics and steering

For the engine there are cylinder head gaskets, a valve cover gasket and air receiver gaskets. A fan clutch and starter motors are part of the picture too. On the hydraulic side you will find hydraulic pumps and seals, and for the steering there are ball joints.

When replacing a head gasket, use new head bolts wherever the workshop manual calls for them and tighten them in the correct sequence and in stages. Clean the mating faces thoroughly and check the head with a straight edge for distortion before the new gasket goes on.

Drawbar and Piton Fix

At the rear there are drawbars and Piton Fix hitches with a locking pin, intended for working with heavy trailers and implements.

  • air-suspended tractor seats
  • work lamps, mirrors and gas struts
  • cylinder head gaskets and a valve cover gasket
  • hydraulic pumps, ball joints and starter motors
  • drawbars and Piton Fix

Finding the part that fits

The type plate on your 1160 shows the exact model and chassis number. For engine components such as a gasket or a starter motor, the number on the old part is a reliable second check. Hold it against the product details.

In the Agrotron TTV line-up the 1160 has two siblings with pages here, the Deutz-Fahr Agrotron TTV 1130 and the Deutz-Fahr Agrotron TTV 1145, each with its own selection. Any other Deutz-Fahr tractor is covered under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart