Menu
EUR

Deutz-Fahr Agrotron TTV 420 tractor parts & technical data

Engine parts, trailer couplings and electrics are among the more than 110 parts listed for the Deutz-Fahr Agrotron TTV 420, all grouped under this one model.

114 parts found for Deutz-Fahr Agrotron TTV 420
Show:
ROCKINGER Trailer coupling hitch pin 30,6 mm, rail 330 mm, 2000 kg, black
ROCKINGER
Rail width (mm): 330 | Guide width (mm): 32 | Drawbar eye: DIN 11026 40 mm, DIN 11043 40 mm, DIN 74054 40 mm | D-value (kN): 120,0 | Type: RO 850 D | ... More
Rail width (mm): 330 | Guide width (mm): 32 | Drawbar eye: DIN 11026 4...
€1.079,32 €892,00 €867,75 €717,15
You save 20%
GRANIT Tensioning pulley Ø 70 / 30 mm Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
GRANIT
Outer Ø: 70 mm. Width: 30 mm. More
Outer Ø: 70 mm. Width: 30 mm.
€80,79 €66,77 €76,75 €63,43
You save 5%
Feed pump Deutz-Fahr Agrotron, Hürlimann XL, Same Fortis, Audax
€222,47 €183,86 €211,30 €174,63
You save 5%
Seal Ø 18 x 2,5 mm
Ø: 18 x 2,5 mm. More
Ø: 18 x 2,5 mm.
€22,60 €18,68
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Sauermann
Supplied with individual certification Ø 30 mm pin More
Supplied with individual certification Ø 30 mm pin
€1.073,19 €886,93 €1.019,50 €842,56
You save 5%
ROCKINGER Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
ROCKINGER
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Detent pin Ø (mm): 25 | D-value (kN): 93,6 | Load capacity (kg): 2500 | Rail wi... More
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | ...
€627,55 €518,64
GRAMMER Seat contact switches IHC, New Holland, Deutz 125 mm, 4-pin
GRAMMER
Sitzoberteil: 721, 722, 731, 741 | Seat contact switch CASE / NEW HOLLAND / DEUTZ version Cable length 125 mm with 4-pin AMP connector plug Make conta... More
Sitzoberteil: 721, 722, 731, 741 | Seat contact switch CASE / NEW HOLL...
€101,91 €84,22 €96,80 €80,00
You save 5%
GRANIT V-belt air conditioning
€19,90 €16,45
Pressure pipe Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
€112,68 €93,12 €107,00 €88,43
You save 5%
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€2.361,86 €1.951,95 €1.855,70 €1.533,64
You save 21%
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.594,71 €1.317,94 €1.315,60 €1.087,27
You save 18%
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
ROCKINGER
Version: Lever upwards More
Version: Lever upwards
€2.508,20 €2.072,89 €1.920,56 €1.587,24
You save 23%
GRANIT Oil cooler height 60 mm
GRANIT
Height: 60 mm. More
Height: 60 mm.
€344,51 €284,72 €327,25 €270,45
You save 5%
Sensor kit rail pressure Hürlimann, Deutz-Fahr, Lamborghini
Version: Rail pressure. More
Version: Rail pressure.
€315,25 €260,54 €299,45 €247,48
You save 5%
GRANIT Bleed valve Fendt, Deutz-Fahr
€241,85 €199,88 €229,75 €189,88
You save 5%
GRANIT Feed pump Lamborghini Mach 200 ST - 250 VRT, R6.100-R6.190
€64,52 €53,32 €61,25 €50,62
You save 5%
GRANIT Seal Ø 11,5 x 3 mm Fendt, SAME, Deutz-Fahr, Lamborghini
€14,20 €11,74
Seal Ø 27 x 2,5 mm Fendt, SAME, Deutz-Fahr, Lamborghini
€21,25 €17,56
Sensor kit rail pressure Hürlimann, Deutz-Fahr, Lamborghini
Version: Rail pressure. More
Version: Rail pressure.
€331,01 €273,56 €299,45 €247,48
You save 10%
Cobo Headlight left / right 12V60/55W / H4, built-in, screw fixing
Cobo
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal voltage: 12 V. Test mark: ECE. Light function: Dipped beam, full beam. Additional in... More
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal volt...
€87,89 €72,64 €83,45 €68,97
You save 5%
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves
SANDEN
Pulley Ø (mm): 132 | No. of grooves: 2 | Suitable oil: SP - 10 | Reference no.: 8227 | Nominal voltage (V): 12 | For compressor: SD7H15 | Fixing: EM ... More
Pulley Ø (mm): 132 | No. of grooves: 2 | Suitable oil: SP - 10 | Refe...
€485,61 €401,33 €461,30 €381,24
You save 5%
Showing 25 - 48 of 114

Deutz-Fahr Agrotron TTV 420 parts, starting with the fuel system

On a stepless tractor such as the Deutz-Fahr Agrotron TTV 420, an uneven fuel supply shows up straight away in how the machine drives. A leaking injection line, a feed pump that cannot keep up or a rail pressure sensor reporting wrong values, and the engine starts to hunt. That is why the fuel system comes first here. Overall this page has more than 110 parts for the TTV 420, from GRANIT, ROCKINGER, Sauermann, Walterscheid and VICTOR REINZ.

From tank to injector

There are feed pumps, injection lines, O-rings for the injection pump and a sensor kit for rail pressure. Keep this part of the engine as clean as you can and cap off open lines and ports the moment they are disconnected. A speck of dirt in an injector causes more trouble than the leak you set out to fix. Injection lines are formed for one fixed route, so do not bend them to make them fit and never start the union nuts at an angle.

Engine seals and gaskets

From VICTOR REINZ and other makers come valve cover gaskets, front engine gaskets and crankshaft seals, together with individual seals and bolts for the exhaust aftertreatment. Tighten a valve cover in a crosswise pattern and with restraint. Overdoing it distorts the gasket and creates the very leak you were trying to cure.

Cab and hitch points

For the cab there is an aircon compressor, gas struts for the front or rear window and mirrors. At the rear you can fit drawbars, top drawbars and Piton Fix, including parts from ROCKINGER and Walterscheid.

If the aircon compressor has to come out, replace the receiver drier too and flush the lines when the old compressor has failed internally. Metal debris from a broken compressor spreads through the circuit and will otherwise destroy the new one quickly.

Type plate and related models

The TTV 420 belongs to the Deutz-Fahr Agrotron TTV series. Check the type plate before ordering and look for a reference number on the part you are taking off. With gaskets and seals in particular, that number is often the only reliable way to tell two similar looking parts apart.

The other types in the TTV series each have a page of their own:

The full overview for the brand is at Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart